Maximum permissible concentration of total hardness in drinking water is (1) 50 (2) 100 (3) 200 (4) 500

1 Answer

Answer :

200

Related questions

Description : Maximum permissible concentration of total hardness in drinking water is – (1) 50 (2) 100 (3) 200 (4) 500

Last Answer : (3) 200 Explanation: Maximum permissible concentration of total hardness in drinking water in 200.

Description : The concentration of Total Dissolved Solids (TDS) in drinking water should not exceed (A) 500 mg/L (B) 400 mg/L (C) 300 mg/L (D) 200 mg/L

Last Answer : (A) 500 mg/L

Description : From pollution control point of view, the maximum permissible concentration of sulphur dioxide in atmospheric air is about __________ ppm. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Description : Maximum permissible concentration of copper in drinking water in mg/L, is – (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Last Answer : (3) 1.0 Explanation: The 1959 WHO International Standards for Drinking Water suggested that concentrations of copper greater than 1.5 mg/litre would markedly impair the potability of the water. However, ... 1.0 mg/litre was established for copper, based on its laundry and other staining properties.

Description : Maximum permissible concentration of copper in drinking water in mg/L is - (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Last Answer : (3) 1.0 Explanation: In the first edition of the Guidelines for Drinking Water Quality, published in 1984, a guideline value of 1.0 mg/litre was established for copper, based on its laundry and other staining properties.

Description : Maximum permissible concentration of copper in drinking water in mg/L is (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Last Answer : 1.0

Description : Maximum permissible concentration of copper in drinking water in mg/L is –

Last Answer : 2.0

Description : The prescribed hardness limit of potable water ranges between  (A) 50 to 75 P.P.M.  (B) 75 to 115 P.P.M.  (C) 100 to 150 P.P.M.  (D) 150 to 200 P.P.M.

Last Answer : (B) 75 to 115 P.P.M. 

Description : With regard to standard of quality of drinking water as laid down by Indian Railway , the requirement (desirable) limit of total dissolved solids should not be more than---------- mg/l a)200 b) 300 c) 400

Last Answer : d) 500*

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

Description : The maximum permissible hardness for public supplies is  (A) 95 mg/litre  (B) 105 mg/litre  (C) 115 mg/litre (D) 125 mg/litre

Last Answer : (C) 115 mg/litre

Description : The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Last Answer : (D) 250 P.P.M.

Description : Insensible loss of body water of normal adult is about (A) 50–100 ml (B) 100–200 ml (C) 300–500 ml (D) 600–1000 ml

Last Answer : Answer : D

Description : In glycoproteins the carbohydrate is in the form of disaccharide units, the number of units are (A) 50–100 (B) 200–300 (C) 400–500 (D) 600–700

Last Answer : Answer : D

Description : What is the initial minimum paid-up equity capital required for new on-tap license to set up private bank as announced by RBI? A) Rs 5 crore B) Rs 100 crore C) Rs 500 crore D) Rs 50 crore E) Rs 200 crore

Last Answer : C) Rs 500 crore Explanation: The Reserve Bank of India released norms for on-tap permits for private sector banks and said the validity of the in-principle approval issued by the RBI will be 18 months from the date of granting in-principle approval.

Description : 1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Last Answer : d. 500

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

Description : Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Last Answer : Answer: Option C

Description : A hardness depth of about 3 mm can be achieved by induction hardness in __________ seconds. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

Description : The normal concentration of potassium in whole blood is (A) 50 mg/100 ml (B) 100 mg/100 ml (C) 150 mg/100 ml (D) 200 mg/100 ml

Last Answer : Answer : D

Description : The normal serum of concentration of copper in mg/100 ml varies between (A) 0–5 (B) 50–100 (C) 100–200 (D) 200–300

Last Answer : Answer : C

Description : The total glycogen content of the body is about ______ gms. (A) 100 (B) 200 (C) 300 (D) 500

Last Answer : C

Description : In case of loss or damage of the parcel, compensation is paid upto a maximum in EPP is a) 100/- b) 500/- c) 200/- d) 1000/

Last Answer : b) 500/

Description : The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Last Answer : C. 500 meters

Description : Brinell Hardness Number (BHN) for talc is approximately in the range of (A) 1-5 (B) 20-30 (C) 100 -150 (D) 200 - 250

Last Answer : (B) 20-30

Description : Maximum permissible concentration (i.e. TLV) of DDT in public water supply system is __________ micro gram (μ g)/litre. (A) 22 (B) 42 (C) 332 (D) 1050

Last Answer : (B) 42

Description : Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : (C) 200 kg/cm2

Description : Permissible compressive strength of M 300 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 300 kg/cm2

Last Answer : (D) 300 kg/cm2

Description : Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : Answer: Option C

Description : Permissible compressive strength of M 150 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : Answer: Option C

Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Last Answer : (D) 10000 to 100000

Description : As per the world health organisation (WHO) specification, the maximum permissible concentration (i.e., TLV) of particulate matter in air is __________ μg/m3 .(μg-microgram) (A) 10 (B) 90 (C) 800 (D) 750

Last Answer : (B) 90

Description : Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Last Answer : (B) 0.2

Description : If a concrete column 200 200 mm in cross-section is reinforced with four steel bars of 1200  mm2  total cross-sectional area. Calculate the safe load for the column if permissible stress in  concrete is 5 N/mm2 ... 15 Ec (A) 264 MN  (B) 274 MN  (C) 284 MN  (D) 294 MN 

Last Answer : (C) 284 MN 

Description : According to I.S code in actual design , maximum permissible deflection is limited to -----------. a.(span/200) b.(span/325) c.(span /525) d.none of the above.

Last Answer : b.(span/325)

Description : The plasma concentration of IgA is (A) 1–5 mg/dl (B) 40–200 mg/dl (C) 60–500 mg/dl (D) 700–1,500 mg/dl

Last Answer : Answer : C

Description : Which of the following is caused by the higher concentration of Nitrogen and Phosphorous? (1) Eutrophication (2) Hardness (3) Alkalinity (4) Acidity

Last Answer : (1) Eutrophication Explanation: Higher concentration of Nitrogen and Phosphorus causes Eutrophication.

Description : Which of the following is caused by the higher concentration of Nitrogen and Phosphorous ? (1) Eutrophication (2) Hardness (3) Alkalinity (4) Acidity

Last Answer : Eutrophication

Description : If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μg/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L

Last Answer : B. 80 L

Description : 2 If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μg/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L

Last Answer : B. 80 L

Description : If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μ g/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L

Last Answer : B. 80 L

Description : Chromium as a contaminant in drinking water in excess of permissible levels, causes (A) Skeletal damage (B) Gastrointestinal problem (C) Dermal and nervous problems (D) Liver/Kidney problems

Last Answer : (D) Liver/Kidney problems 

Description : Permissible creep in track is m. 50 mm n. 100 mm o. 125 mm p. 150 mm.*

Last Answer : p. 150 mm.*

Description : The total sulphur content of the body is (A) 25–50 gm (B) 50–75 gm (C) 100–125 gm (D) 150–200 gm

Last Answer : Answer : D

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

Description : If total run off of a basin of 50 hectares is 0.8 cm, the ordinate of Bernard's distribution graph, may be calculated by the formula (where Q is the discharge in cumecs at the given time) (A) y = 50 Q (B) y = 100 Q (C) y = 200 Q (D) y = 250 Q

Last Answer : Answer: Option D

Description : For large sewers, maximum distance between manholes may be A. 50 m B. 100 m C. 200 m D. 300 m

Last Answer : ANS: D

Description : The maximum non-verticality of the bore of a well 200 m deep, may be permitted up to (A) 25 cm (B) 50 cm (C) 75 cm (D) 100 cm

Last Answer : (D) 100 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

Description : Maximum number of members in case of public company is: A. 50 B. 100 C. 150 D. 200

Last Answer : D. 200