What is a Bakelite ? (1) Solution (2) Acid (3) Base (4) Polymer

What is a Bakelite ? (1) Solution (2) Acid (3) Base (4) Polymer
by

1 Answer

Answer :

Polymer
by

Related questions

What is a Bakelite? (1) Solution (2) Acid (3) Base (4) Polymer

Description : What is a Bakelite? (1) Solution (2) Acid (3) Base (4) Polymer

Last Answer : (4) Polymer Explanation: Bakelite is the commercial name for the polymer obtained by the polymerization of phenol and formaldehyde. It is an early plastic. Plastic (from the Greek "plastikos," ... , polymers. Bakelite was developed by the BelgianAmerican chemist Leo Baekeland in New York in 1907.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite

Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.

The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite

Last Answer : Nylon 66

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out ... is also referred to as a polysaccharide, because it is a polymer of the monosaccharide glucose.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out water molecules as they chemically combine.

Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Description : Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Last Answer : Bakelite

Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive(d) All of the above

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : Starch

The polymer used in making plastic crockery is (1) Decron (2) Nylon (3) Bakelite (4) Melamine

Description : The polymer used in making plastic crockery is (1) Decron (2) Nylon (3) Bakelite (4) Melamine

Last Answer : Melamine

Bakelite is the condensation polymer of:

Description : Bakelite is the condensation polymer of:

Last Answer : Bakelite is the condensation polymer of: A. `C_(6)H_(5)OH` and caprolactum B. HCHO and phthalic acid ... H_(5)OH` and HCHO D. HCHO and ethylene glycol

Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Description : Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Last Answer : (C) Poly-methyl-methacrylate (PMMA)

__________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Description : __________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Last Answer : (C) Polythene

Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Description : Bakelite is a/an (A) Addition polymer (B) Elastomer (C) Thermoplastic (D) None of these

Last Answer : (D) None of these

Which of the following is not a polymer of two monomers? (A) Teflon (B) Bakelite (C) SBR (D) None of these

Description : Which of the following is not a polymer of two monomers? (A) Teflon (B) Bakelite (C) SBR (D) None of these

Last Answer : (A) Teflon

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Which of the following is an inorganic polymer? (A) Teflon (B) Perspex (C) Silicones (D) Bakelite

Description : Which of the following is an inorganic polymer? (A) Teflon (B) Perspex (C) Silicones (D) Bakelite

Last Answer : (C) Silicones

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermoset phenol formaldehyde

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8

Last Answer : Nylon-6,6

Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Last Answer : Phenol and formaldehyde

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Description : Karbate is (A) A mixture of iron dust and saw dust (B) Carbon impregnated with resin (usually Bakelite) (C) An acid resistant material (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

What are the base monomers of the DNA polymer called?

Description : What are the base monomers of the DNA polymer called?

Last Answer : Need answer

A zwitterion is (a) an ion that is positively charged in solution (b) an ion that is negatively charged in solution (c) a compound that can ionize both as a base and an acid. (d) a carbohydrate with an electrical charge.

Description : A zwitterion is (a) an ion that is positively charged in solution (b) an ion that is negatively charged in solution (c) a compound that can ionize both as a base and an acid. (d) a carbohydrate with an electrical charge.

Last Answer : a compound that can ionize both as a base and an acid

Bakelite is a copolymer of Phenol and - (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Description : Bakelite is a copolymer of Phenol and - (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Last Answer : (1) Formaldehyde Explanation: Bakelite is an early plastic. It is a thermosetting phenol formaldehyde resin, formed from an elimination reaction of phenol with formaldehyde.

Bakelite is a copolymer of Phenol and (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Description : Bakelite is a copolymer of Phenol and (1) Formaldehyde (2) Acetaldehyde (3) Benzaldehyde (4) Cinnaldehyde

Last Answer : Formaldehyde

Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.

Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : Terephthalic acid

The turbidity of a polymer solution measures:

Description : The turbidity of a polymer solution measures:

Last Answer : The turbidity of a polymer solution measures: A. a light absorbed by solution B. light transmitted ... scattered by the solution D. none of these

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

Viscosity of a polymer solution or melt (A) Decreases with increase in molecular weight (B) Decreases with increase in temperature (C) Increases with increase in temperature (D) Does not vary with temperature rise

Description : Viscosity of a polymer solution or melt (A) Decreases with increase in molecular weight (B) Decreases with increase in temperature (C) Increases with increase in temperature (D) Does not vary with temperature rise

Last Answer : (C) Increases with increase in temperature

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

What happens when a solution of an acid is mixed with a solution of a base in a test tube ? -SST 10th

Description : What happens when a solution of an acid is mixed with a solution of a base in a test tube ? -SST 10th

Last Answer : D - When an acid reacts with a base, a neutral salt is formed by the neutralisation process. As neutralisation process is an exothermic reaction, the temperature of the solution increases.

The percentage degree of hydrolysis of a salt of weak acid (HA) and weak base (BOH) in its 0.1 M solution is found to be `10%.` If the molarity of the

Description : The percentage degree of hydrolysis of a salt of weak acid (HA) and weak base (BOH) in its 0.1 M solution is found to be `10%.` If the molarity of the

Last Answer : The percentage degree of hydrolysis of a salt of weak acid (HA) and weak base (BOH) in its 0.1 M solution is ... A. `5%` B. `10%` C. `20%` D. none

An organic base (X) reacts with nitrous acid at `0^(@)C` to give a clear solution. Heating the solution with KCN and cuprous cyanide followed by conti

Description : An organic base (X) reacts with nitrous acid at `0^(@)C` to give a clear solution. Heating the solution with KCN and cuprous cyanide followed by conti

Last Answer : An organic base (X) reacts with nitrous acid at `0^(@)C` to give a clear solution. Heating the solution with ... solid. "X" is : A. B. C. D.

The volume of `0.1 N` dibasic acid sufficient to neutralize 1g of a base that furnishes `0.04` mole of `OH^-` in aqueous solution is :

Description : The volume of `0.1 N` dibasic acid sufficient to neutralize 1g of a base that furnishes `0.04` mole of `OH^-` in aqueous solution is :

Last Answer : The volume of `0.1 N` dibasic acid sufficient to neutralize 1g of a base that furnishes `0.04` mole of `OH^-` ... 400 mL B. 600 mL C. 200 mL D. 80 mL

.Which of the following statements is correct about an aqueous solution of an acid and of a base? (i) Higher the pH, stronger the acid (ii) Higher the pH, weaker the acid (iii) Lower the pH, stronger the base (iv) Lower the pH, weaker the base (a) (i) and (iii) (b) (ii) and (iii (c) (i) and (iv) (d) (ii) and (iv)

Description : .Which of the following statements is correct about an aqueous solution of an acid and of a base? (i) Higher the pH, stronger the acid (ii) Higher the pH, weaker the acid (iii) Lower the pH, stronger the base (iv) Lower the pH, ... (i) and (iii) (b) (ii) and (iii (c) (i) and (iv) (d) (ii) and (iv)

Last Answer : (d) (ii) and (iv)

Will "bakelite" handles on flatware get yucky over time?

Description : Will "bakelite" handles on flatware get yucky over time?

Last Answer : answer:Yup. Yucky if you are referring to becoming discolored and cracked. They still work, until they crack and fall apart and all of ours did after several years. Maybe you should go with stainless steel ... wouldn't go this way and I think it's the dishwasher that ruins the bakelite. Good luck!

What type of plastic is Bakelite ?

Last Answer : Bakelite thermosetting plastic ?

The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is an exmaple of:

Description : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is an exmaple of:

Last Answer : The bakelite is made from phenol and formaldehyde. The initial reaction between the two compounds is ... C. free radical reaction D. aldol reaction

Bakelite is prepared by the reaction between:

Description : Bakelite is prepared by the reaction between:

Last Answer : Bakelite is prepared by the reaction between: A. urea and formaldeyde B. tetra ... formaldehyde D. ethylene glycol and dimethyl terephthalate

Bakelite is a product of the reaction between:

Description : Bakelite is a product of the reaction between:

Last Answer : Bakelite is a product of the reaction between: A. formaldehyde and NaOH B. aniline and urea C. phenol and methanal D. phenol and chloroform

When placed in a magnetic field, which of the materials listed will maintain the highest permeability? A. Glass B. Bakelite C. Soft iron D. Aluminum

Description : When placed in a magnetic field, which of the materials listed will maintain the highest permeability? A. Glass B. Bakelite C. Soft iron D. Aluminum

Last Answer : Answer: C

Which of the substances listed can be used to shield sensitive equipment from static magnetic fields? A. Glass B. Mica C. Bakelite D. Permeable iron

Description : Which of the substances listed can be used to shield sensitive equipment from static magnetic fields? A. Glass B. Mica C. Bakelite D. Permeable iron

Last Answer : Answer: D

Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Description : Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Last Answer : B. teflon

Bakelite is made from?

Description : Bakelite is made from?

Last Answer : Phenol and formaldehyde

Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Description : Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Last Answer : (D) PVC

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66