In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

In case of wet spinning of polymers, the polymer solution is forced
through spinnerates into, a coagulating bath to give a filament form. Wet
spinning is not used in case of the __________ fibres.
(A) Viscose rayon
(B) Acrylic
(C) Polyvinyl acetate
(D) Saturated polyeste
by

1 Answer

Answer :

(D) Saturated polyeste
by

Related questions

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Last Answer : (A) Platinum or gold alloys

Viscose rayon is (A) Cellulose nitrate(B) Regenerated cellulose nitrate(C) Regenerated cellulose acetate(D) None of these

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate

Description : Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate

Last Answer : (D) Regenerated cellulose acetate

Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Description : Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Last Answer : b. Linen

Polyvinyl acetate is never used for making (A) Moulded articles (B) Fibres (C) Adhesives

Description : Polyvinyl acetate is never used for making (A) Moulded articles (B) Fibres (C) Adhesives

Last Answer : (A) Moulded articles

Which of the following statements is false about cellulose? (a) It is a polymer of glucose molecules joined in β-1,4 linkages. (b) It is a major component of cotton. (c) It is used in the manufacture of Dacron fibres. (d) It is used in the manufacture of Rayon fibres

Description : Which of the following statements is false about cellulose? (a) It is a polymer of glucose molecules joined in β-1,4 linkages. (b) It is a major component of cotton. (c) It is used in the manufacture of Dacron fibres. (d) It is used in the manufacture of Rayon fibres

Last Answer : It is used in the manufacture of Dacron fibres.

Which of the following is not a natural fibre? (A) Silk (B) Viscose rayon (C) Wool (D) Cotton

Description : Which of the following is not a natural fibre? (A) Silk (B) Viscose rayon (C) Wool (D) Cotton

Last Answer : (B) Viscose rayon

Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Description : Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Last Answer : (B) Utilises H2SO4 , NaOH and CS2 during its manufacture

In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Carbon disulphide is mainly used in the production of(A) Viscose rayon(B) Corundum(C) Plasticiser for unsaturated polyester(D) Paints

Description : Carbon disulphide is mainly used in the production of(A) Viscose rayon (B) Corundum (C) Plasticiser for unsaturated polyester (D) Paints

Last Answer : (A) Viscose rayon

Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

What are the raw materials for making viscose rayon ?

Last Answer : Cotton lintus , bamboo pulp , wood pulp

Which natural fiber is viscose rayon ?

Last Answer : Viscose rayon regenerated cellulosic fiber. That is to make cellulose cellulose with chemicals again. Some other regenerated fibers are modal , tensile.

A polymeric substance used to make parachute is – (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Description : A polymeric substance used to make parachute is – (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Last Answer : (2) Viscose Explanation: Viscose is a viscous organic liquid used to make rayon and cellophane. Viscose is also used as shorthand for Viscose Rayon, thus becoming synonymous with rayon, a soft man-made fibre commonly used in dresses, linings shirts, shorts, coats, jackets, and other outer wear.

Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Description : Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Last Answer : b. Cotton

A polymeric substance used to make parachute is (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Description : A polymeric substance used to make parachute is (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Last Answer : Viscose

__________ fibres are made of polyamides. (A) Dacron (B) Nylon (C) Rayon (D) Orion

Description : __________ fibres are made of polyamides. (A) Dacron (B) Nylon (C) Rayon (D) Orion

Last Answer : (B) Nylon

The synthetic fibres produced from __________ are known as rayon. (A) Lignin (B) Cellulose (C) Polyamides (D) Ethylene glyco

Description : The synthetic fibres produced from __________ are known as rayon. (A) Lignin (B) Cellulose (C) Polyamides (D) Ethylene glyco

Last Answer : (B) Cellulose

Cellulose is the main constituent of most __________ fibres. (A) Acrylic (B) Spandex (C) Synthetic (D) Natural

Description : Cellulose is the main constituent of most __________ fibres. (A) Acrylic (B) Spandex (C) Synthetic (D) Natural

Last Answer : (D) Natura

The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is(A) Polyvinyl alcohol(B) Polyvinyl acetate(C) Polyvinyl butyral(D) PVC

Description : The major constituent of laminate of safety glass, which holds the broken glass, pieces in their places during accident (and thus minimises the danger from flying glass fragments) is (A) Polyvinyl alcohol (B) Polyvinyl acetate (C) Polyvinyl butyral (D) PVC

Last Answer : (C) Polyvinyl butyral

Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Description : Pick up the non-inflammable plastic from the following: (A) Cellulose acetate plastics (B) Polyvinyl chloride plastics (C) Phenol formaldehyde plastic (D) Urea formaldehyde plastic

Last Answer : Answer: Option B

Which one of the following polymers is widely used for making bullet proof material? (1) Polyvinyl chloride (2) Polyamides (3) Polyethylene (4) Polycarbonates

Description : Which one of the following polymers is widely used for making bullet proof material? (1) Polyvinyl chloride (2) Polyamides (3) Polyethylene (4) Polycarbonates

Last Answer : (4) Polycarbonates Explanation: Ballistic nylon was the standard cloth used for bulletproof vests until the 1970s. In 1965, Stephanie Kwolek, a chemist at Du Pont, invented Kevlar, trademark ... terephthalamide, a liquid polymer that can be spun into aramid fiber and woven into cloth.

Which one among the following polymers is used for making bullet-proof material? (1) Polyvinyl chloride (2) Polystyrene (3) Polyethylene (4) Polyamide

Description : Which one among the following polymers is used for making bullet-proof material? (1) Polyvinyl chloride (2) Polystyrene (3) Polyethylene (4) Polyamide

Last Answer : (3) Polyethylene Explanation: A bullet-proof material is made of polyethylene. It is a higher grade of the plastic found in Tupperware.

__________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard

Description : __________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate. (A) Fibrous (B) Leathery (C) Rubbery (D) Hard

Last Answer : (B) Leathery

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

The major component of acrylic fibres is (A) Polyamides (B) Polyolefins(C) Polyacrylonitrile(D) Polyesters

Description : The major component of acrylic fibres is (A) Polyamides (B) Polyolefins (C) Polyacrylonitrile (D) Polyesters

Last Answer : (C) Polyacrylonitrile

Rayon is superior to cotton in making gauge for wound treatment, because rayon (A) Is a synthetic polymer (B) Does not stick to the wound unlike cotton (C) Can absorb over 90% of its own weight of water (D) Both (B) and (C)

Description : Rayon is superior to cotton in making gauge for wound treatment, because rayon (A) Is a synthetic polymer (B) Does not stick to the wound unlike cotton (C) Can absorb over 90% of its own weight of water (D) Both (B) and (C)

Last Answer : (B) Does not stick to the wound unlike cotton

Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane(B) Polythene(C) Cellulose acetate(D) Teflon

Description : Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane (B) Polythene (C) Cellulose acetate (D) Teflon

Last Answer : (B) Polythene

Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of - (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : (2) Polyamide polymer Explanation: Nylon is a generic designation for a family of synthetic polymers, more specifically aliphatic or semiaromatic polyamides. They can be melt-processed into fibers, ... . Nylon polymers have found significant commercial applications in fibers, in shapes and in films.

Arrange the following polymer in increasing order of their molecular forces : (a) nylon-6, 6, Buna-S, polythene. (b) nylon-6, Neoprene, polyvinyl chloride.

Description : Arrange the following polymer in increasing order of their molecular forces : (a) nylon-6, 6, Buna-S, polythene. (b) nylon-6, Neoprene, polyvinyl chloride.

Last Answer : Ans. (a) Buna S < Polythene < Nylon-6, 6. (b) Neoprene < Polyvinyl Chloride < Nylon-6.

Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Description : Nylon threads are made of (1) Polyester polymer (2) Polyamide polymer (3) Polyvinyl polymer (4) Polysaccharide

Last Answer : Polyamide polymer

Which of the following fibres catches fire least? (1) Nylon (2) Cotton (3) Rayon (4) Terricot

Description : Which of the following fibres catches fire least? (1) Nylon (2) Cotton (3) Rayon (4) Terricot

Last Answer : (2) Cotton Explanation: The fibre least prone to catch fire is cotton. Fabrics with more of the fiber surface area exposed to air have more oxygen available to support, burning and therefore burn more easily. Thus, thin, gauzy fabrics, lace, or brushed fabrics can be very flammable.

Which of the following fibres catches fire least ? (1) Nylon (2) Cotton (3) Rayon (4) Terricot

Description : Which of the following fibres catches fire least ? (1) Nylon (2) Cotton (3) Rayon (4) Terricot

Last Answer : Cotton

Which of the following is not a polymer? w) rayon x) Teflon y) rubber z) penicillin

Description : Which of the following is not a polymer? w) rayon x) Teflon y) rubber z) penicillin

Last Answer : ANSWER: Z -- PENICILLIN

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Which of the following types of polymers has the strongest inter particle forces? (A) Elastomers (B) Fibres (C) Thermoplastics (D) Thermosetting polymers

Description : Which of the following types of polymers has the strongest inter particle forces? (A) Elastomers (B) Fibres (C) Thermoplastics (D) Thermosetting polymers

Last Answer : (D) Thermosetting polymers

Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

To be effective in ulcerative colitis, 5-aminosalicylic acid has to be given as: A. Acrylic polymer coated tablet which releases the drug only in the lower bowel B. A complex of two molecules joined together by azo bond C. A retention enema D. Any of the above ways

Description : To be effective in ulcerative colitis, 5-aminosalicylic acid has to be given as: A. Acrylic polymer coated tablet which releases the drug only in the lower bowel B. A complex of two molecules joined together by azo bond C. A retention enema D. Any of the above ways

Last Answer : D. Any of the above ways

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)