__________ is a thermosetting plastic. (A) PVC (B) Polythene (C) Bakelite (D) Polystyrene

__________ is a thermosetting plastic.
(A) PVC
(B) Polythene
(C) Bakelite
(D) Polystyrene
by

1 Answer

Answer :

(C) Bakelite
by

Related questions

__________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Description : __________ is a thermosetting plastic. (A) Polythene (B) Epoxy polymer (C) P.V.C. (D) Polystyrene

Last Answer : (B) Epoxy polymer

__________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Description : __________ is a thermosetting plastic. (A) Polyvinyl chloride (B) Polythene (C) Bakelite (D) Teflon

Last Answer : (C) Bakelite

__________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Description : __________ tubes are good substitute for human blood vessels on heart by-pass operation. (A) PVC (B) Polythene (C) Teflon/Dacron (D) Polystyrene

Last Answer : (C) Teflon/Dacron

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Last Answer : (A) Polystyrene

Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Description : Which of the following is not a thermoplastic material? (A) Epoxy polymer (B) PVC (C) Polystyrene (D) Polythene

Last Answer : (A) Epoxy polymer

Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Description : Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Last Answer : (B) Bakelite

Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive(d) All of the above

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

The first fully synthetic plastic was_________. a) Bakelite b)melamine c)Teflon d)polythene

Description : The first fully synthetic plastic was_________. a) Bakelite b)melamine c)Teflon d)polythene

Last Answer : a) Bakelite

PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Description : PVC stands for (A) Plastic very compact (B) Polythene vinyl chloride (C) Polythene vinyl carbon (D) Polythene vanadium carbide

Last Answer : Answer: Option B

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

__________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Description : __________ scrap can be recycled & reutilised. (A) Bakelite (B) Epoxy resin (C) Polythene (D) None of these

Last Answer : (C) Polythene

__________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Description : __________ is an addition polymer (A) Nylon (B) Bakelite (C) Polythene (D) None of these

Last Answer : (C) Polythene

Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Ion exchange resins are made of (A) Lucite (B) Sulphonated Bakelite (C) Polystyrene (D) Teflon

Description : Ion exchange resins are made of (A) Lucite (B) Sulphonated Bakelite (C) Polystyrene (D) Teflon

Last Answer : (B) Sulphonated Bakelite

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Last Answer : (A) Addition polymerisation product

Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Description : Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Last Answer : (C) Neoprene is a natural rubber

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Description : Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Last Answer : (A) Polystyrene

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Description : Lavatory cisterns are normally made of (A) Expanded polystyrene (B) Saturated polyester (C) Perspex (D) PVC

Last Answer : (A) Expanded polystyrene

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Last Answer : (C) PVC

Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Description : Which of the following is a thermosetting polymer? (a) Bakelite (b) Nylon-6,6 (c) Polyethylene (d) Teflon

Last Answer : Bakelite

Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Description : Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Last Answer : B. teflon

Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Description : Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Last Answer : (D) PVC

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Which of the following polymers is used for making a non stick coatingon frying pans?(A) Bakelite(B) Teflon(C) Perspex(D) PVC

Description : Which of the following polymers is used for making a non stick coatingon frying pans? (A) Bakelite (B) Teflon (C) Perspex (D) PVC

Last Answer : (B) Teflon

Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde

Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Description : Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Last Answer : (C) Polypropylene

Automobile steering wheels are normally made of (A) Cellulose acetate(B) Cellulose nitrate(C) PVC(D) High density polythene

Description : Automobile steering wheels are normally made of (A) Cellulose acetate (B) Cellulose nitrate (C) PVC (D) High density polythene

Last Answer : (A) Cellulose acetate

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out ... is also referred to as a polysaccharide, because it is a polymer of the monosaccharide glucose.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : (4) Starch Explanation: Cotton, starch, cellulose and rubber are some of the naturally occurring polymers. Starch is a condensation polymer made up of hundreds of glucose monomers, which split out water molecules as they chemically combine.

Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Description : Which of the following is a natural polymer? (1) Bakelite (2) Nylon (3) Polythene (4) Starch

Last Answer : Starch

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

What material is most often used for the outer covering of coaxial cables? A. PVC B. Teflon C. PE D. Polystyrene

Description : What material is most often used for the outer covering of coaxial cables? A. PVC B. Teflon C. PE D. Polystyrene

Last Answer : A. PVC

Polystyrene is a __________ plastic at room temperature. (A) Ductile (B) Brittle (C) Malleable (D) None of these

Description : Polystyrene is a __________ plastic at room temperature. (A) Ductile (B) Brittle (C) Malleable (D) None of these

Last Answer : (B) Brittle

Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Description : Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Last Answer : (B) bakelite.

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming