how much sand do i need for my sand filter for a 24 foot pool?

how much sand do i need for my sand filter for a 24 foot pool?
by

1 Answer

Answer :

The best thing to do is to locate the manufacturer on the filter. Sometimes the amount of sand is listed right on the filter next to this name. If it is not, you need to contact the manufacturer as all filters are somewhat different. An average would be 200-250 pounds.
by

Related questions

After cleaning a slow sand filter, the filtered water is not used for (A) 6 hours to 12 hours (B) 12 hours to 18 hours (C) 18 hours to 24 hours (D) 24 hours to 36 hours

Description : After cleaning a slow sand filter, the filtered water is not used for  (A) 6 hours to 12 hours  (B) 12 hours to 18 hours  (C) 18 hours to 24 hours  (D) 24 hours to 36 hours 

Last Answer : (D) 24 hours to 36 hours 

Can I use sand to fill in the hole where my above ground pool use to be?

Description : Can I use sand to fill in the hole where my above ground pool use to be?

Last Answer : You say, 'where my above ground pool use to be.' Is there a shallow, medium or deep hole to be filled? or a slight depression?A hole would be better filled with a mixture of sand, soil and ... the ground of the site of the removed pool with the rest of the area to ensure a stable surface overall.

What Rectangular pool has an area of 192 square feet. The length of the pool is 15 feet. What is the pool and width rounded to the nearest foot?

Description : What Rectangular pool has an area of 192 square feet. The length of the pool is 15 feet. What is the pool and width rounded to the nearest foot?

Last Answer : 13 feet

what does it cost to replace liner in 27 foot round 48in deep beaded pool?

Description : what does it cost to replace liner in 27 foot round 48in deep beaded pool?

Last Answer : It nearly cost above hundred dollars to replace liner in 27 foot round 48in deep beaded pool

Not being nasty, but is there a jelly net/filter that the new phylum Cnidaria fall into before coming through to the main pool?

Description : Not being nasty, but is there a jelly net/filter that the new phylum Cnidaria fall into before coming through to the main pool?

Last Answer : answer:LOL… how well I recall this question, almost word-for-word, during the Answerbag diaspora of December 2009, when I joined. Try to find a quiet part of the pool to hang in while the new fry muddy up the littoral, @ZEPHYRA. They’ll be old-timers before you know it.

Why is my pool filter gurgling?

Description : Why is my pool filter gurgling?

Last Answer : Need answer

How often should I change my pool cartridge filter ?

Description : How often should I change my pool cartridge filter ?

Last Answer : Call the pool store where you purchase pool cartridges and ask how often you should change it. Replacement depends on the size of the pool and how it is used, as well as the type and size of the cartridge. The packaging may have some info, but call the pool store if you need more details.

Pool Filter?

Description : Pool Filter?

Last Answer : form_title=Pool Filter form_header=Pool service professionals are available to help you with all of your pool filtration needs. Are you having problems with the filtration system of your pool?*= () Yes () No Do ... ) In ground Is your pool a chlorine or salt water pool?*= () Chlorine () Salt water

What are the sand sized organisms in a one foot area that are popping around in the dirt near a pathway outside

Description : What are the sand sized organisms in a one foot area that are popping around in the dirt near a pathway outside

Last Answer : I think that they not like hot soapy water.............mix 2 tablespoons dawn & 1 qt hot water and pour over them...........do not get on grass.

The filter over which sewage is sprinkled is called as – (1) Trickling filter (2) Percolating filter (3) Contact bed (4) Intermittent sand filter

Description : The filter over which sewage is sprinkled is called as – (1) Trickling filter (2) Percolating filter (3) Contact bed (4) Intermittent sand filter

Last Answer : (1) Trickling filter Explanation: A trickling filter, also known as percolating filter, is an artificial bed of stone or broken brick material over which waste water or sewage is allowed to sprinkle or to trickle. It is then collected through the under drainage system.

For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Description : For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Last Answer : (A) Gravity sand

For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea(C) Sand(D) Rotary vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

Moore filter is a __________ filter. (A) Leaf (B) Press (C) Rotary (D) Sand

Description : Moore filter is a __________ filter. (A) Leaf (B) Press (C) Rotary (D) Sand

Last Answer : (A) Leaf

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Description : Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Last Answer : (C) Mud balls

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

Brackish water which contains mostly dissolved salt, can be purified by the __________ process. (A) Reverse osmosis (B) Sand filter(C) Lime soda(D) Permutit

Description : Brackish water which contains mostly dissolved salt, can be purified by the __________ process. (A) Reverse osmosis (B) Sand filter (C) Lime soda (D) Permutit

Last Answer : (A) Reverse osmosis

Air filtration typically uses a filter. a. HEPA b. Membrane c. Sand d. Diatomaceous Earth

Description : Air filtration typically uses a filter. a. HEPA b. Membrane c. Sand d. Diatomaceous Earth

Last Answer : a. HEPA

Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

Mud balls may be removed by (A) Breaking and washing (B) Washing the filter with a solution of caustic soda (C) Removing, cleaning and replacing the damaged sand (D) All the above

Description : Mud balls may be removed by (A) Breaking and washing (B) Washing the filter with a solution of caustic soda (C) Removing, cleaning and replacing the damaged sand (D) All the above

Last Answer : (D) All the above

The maximum permitted loss of head in a rapid sand filter, is (A) 1 m (B) 2 m (C) 3 m (D) 4 m

Description : The maximum permitted loss of head in a rapid sand filter, is (A) 1 m (B) 2 m (C) 3 m (D) 4 m

Last Answer : (C) 3 m

Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Description : Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Last Answer : (D) 50 gm/litre

A high velocity of wash water is required for (A) Rapid gravity filter with strainers (B) Rapid gravity filter without strainers (C) Slow sand filter with strainers (D) Slow sand filter without strainers

Description : A high velocity of wash water is required for (A) Rapid gravity filter with strainers (B) Rapid gravity filter without strainers (C) Slow sand filter with strainers (D) Slow sand filter without strainers

Last Answer : (B) Rapid gravity filter without strainers

Efficiency of removing bacterias from raw water by a slow sand filter, is (A) 80% to 81% (B) 85% to 86% (C) 90% to 97% (D) 98% to 99%

Description : Efficiency of removing bacterias from raw water by a slow sand filter, is (A) 80% to 81% (B) 85% to 86% (C) 90% to 97% (D) 98% to 99%

Last Answer : (D) 98% to 99%

Rapid sand filter (A) Should be preceded by coagulation and sedimentation (B) Uses rapid sand as filter media(C) Is used after slow sand filtering has been done (D) Can combine disinfection also

Description : Rapid sand filter (A) Should be preceded by coagulation and sedimentation (B) Uses rapid sand as filter media (C) Is used after slow sand filtering has been done (D) Can combine disinfection also

Last Answer : (A) Should be preceded by coagulation and sedimentation

The period of cleaning of a slow sand filter, is usually (A) 5 to 10 days (B) Two weeks to three weeks (C) One month to three months (D) Three months to six months

Description : The period of cleaning of a slow sand filter, is usually (A) 5 to 10 days (B) Two weeks to three weeks (C) One month to three months (D) Three months to six months

Last Answer : (C) One month to three months

The yield of a rapid gravity filter as compared to that of slow sand filter, is (A) 10 times (B) 15 times (C) 20 times (D) 30 times

Description : The yield of a rapid gravity filter as compared to that of slow sand filter, is (A) 10 times (B) 15 times (C) 20 times (D) 30 times

Last Answer : (D) 30 times

Distribution of wash water is provided in (A) Sedimentation tank (B) Slow sand filter (C) Rapid gravity filter (D) All the above

Description : Distribution of wash water is provided in  (A) Sedimentation tank  (B) Slow sand filter  (C) Rapid gravity filter  (D) All the above 

Last Answer : (C) Rapid gravity filter

A slow sand filter is cleaned if its filter head is higher than (A) 10 cm to 20 cm (B) 20 cm to 40 cm (C) 40 cm to 70 cm (D) 70 cm to 120 cm

Description : A slow sand filter is cleaned if its filter head is higher than  (A) 10 cm to 20 cm  (B) 20 cm to 40 cm  (C) 40 cm to 70 cm  (D) 70 cm to 120 cm

Last Answer : (D) 70 cm to 120 cm

Pick up the incorrect statement from the following: (A) The water entering the slow sand filters should be treated by 9.386 coagulants (B) The depth of water on the filter should be twice the depth of the filter sand (C) When the filter head is 0.75 times the depth of filter sand, the water obtained is purest (D) All the above

Description : Pick up the incorrect statement from the following:  (A) The water entering the slow sand filters should be treated by 9.386 coagulants  (B) The depth of water on the filter should be twice the ... is 0.75 times the depth of filter sand, the water obtained is purest  (D) All the above 

Last Answer : (D) All the above 

The U.C. (uniformity coefficient) D60/D10 for the best filter media sand should be (A) 2 (B) 3 (C) 4 (D) 5

Description : The U.C. (uniformity coefficient) D60/D10 for the best filter media sand should be  (A) 2  (B) 3  (C) 4  (D) 5

Last Answer : (A) 2

In a rapid sand filter, air binding is caused due to excessive (A) Negative pressure (B) Pressure (C) Turbidity (D) Water pressure

Description : In a rapid sand filter, air binding is caused due to excessive  (A) Negative pressure  (B) Pressure  (C) Turbidity  (D) Water pressure

Last Answer : (A) Negative pressure

A slow sand filter is cleaned if its filter head is higher than (A) 10 cm to 20 cm (B) 20 cm to 40 cm (C) 40 cm to 70 cm (D) 70 cm to 120 cm

Description : A slow sand filter is cleaned if its filter head is higher than (A) 10 cm to 20 cm (B) 20 cm to 40 cm (C) 40 cm to 70 cm (D) 70 cm to 120 cm

Last Answer : (D) 70 cm to 120 cm

Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly distribute the backwash water 5. To prevent algae growth Which of the following statements are correct ? a) 1, 2, 3, 4 and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Description : Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly ... and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Last Answer : b) 2, 3 and 4 only

The filter over which sewage is sprinkled is called as (1) Trickling filter (2) Percolating filter (3) Contact bed (4) Intermittent sand filter

Description : The filter over which sewage is sprinkled is called as (1) Trickling filter (2) Percolating filter (3) Contact bed (4) Intermittent sand filter

Last Answer : Trickling filter

20 people jump into an empty pool filled with water and nothing else. After, they jumped in 24 heads came back up. How is this possible? -Riddles

Description : 20 people jump into an empty pool filled with water and nothing else. After, they jumped in 24 heads came back up. How is this possible? -Riddles

Last Answer : There was 20 foreheads.

Just filled our above ground 18ft round pool with water. About 24 hours later there is a green look to it. We haven't even used it yet. Is this because of our water hardness level. We have very hard water.(from well) What can be done to clear up the water?

Description : Just filled our above ground 18ft round pool with water. About 24 hours later there is a green look to it. We haven't even used it yet. Is this because of our water hardness level. We have very hard water.(from well) What can be done to clear up the water?

Last Answer : Your water is turning green due to algae. You need to scrub your pool walls to and then "Shock" your pool by adding chlorine. Keep your pool filtered and it should clear up in a few days.

Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Description : Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Last Answer : c) either (a) or (b) *

The best quality of filter material is obtained from quartzite if it does not loose weight when placed in hydrochloric acid for 24 hours, more than (A) 5 % (B) 8 % (C) 10 % (D) 12 %

Description : The best quality of filter material is obtained from quartzite if it does not loose weight when  placed in hydrochloric acid for 24 hours, more than  (A) 5 %  (B) 8 %  (C) 10 %  (D) 12 % 

Last Answer : (A) 5 % 

HOW MUCH ROOM DO YOU NEED AROUND A REGULATION POOL TABLE

Description : HOW MUCH ROOM DO YOU NEED AROUND A REGULATION POOL TABLE

Last Answer : Need Answer