The best quality of filter material is obtained from quartzite if it does not loose weight when 

placed in hydrochloric acid for 24 hours, more than 

(A) 5 % 

(B) 8 % 

(C) 10 % 

(D) 12 % 

1 Answer

Answer :

(A) 5 % 

Related questions

Description : A 1st class brick immersed in water for 24 hours, should not absorb water (by weight) more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %

Last Answer : Answer: Option C

Description : The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick (A) 20 % (B) 15 % (C) 10 % (D) None of these

Last Answer : Answer: Option A

Description : After cleaning a slow sand filter, the filtered water is not used for  (A) 6 hours to 12 hours  (B) 12 hours to 18 hours  (C) 18 hours to 24 hours  (D) 24 hours to 36 hours 

Last Answer : (D) 24 hours to 36 hours 

Description : A first class brick when immersed in cold water for 24 hours should not absorb water more than (A) 15 % (B) 20 % (C) 22 % (D) 25 %

Last Answer : Answer: Option B

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

Description : Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. (A) 1 (B) 20 (C) 100 (D) 500

Last Answer : (B) 20

Description : Write balanced equation for the reaction between magnesium and hydrochloric acid. Name the product obtained, identify the type of reaction. -Chemistry

Last Answer : Answer. The product formed is magnesium chloride and hydrogen gas. It is a displacement reaction.

Description : Toluene is nitrated and the resulting product is reduct is reduced with tin and hydrochloric acid. The product so obtained is diazotised and then with

Last Answer : Toluene is nitrated and the resulting product is reduct is reduced with tin and hydrochloric acid ... D. mixture of o-and p-bromotoulenes

Description : A good quality stone absorbs water less than (A) 5 % (B) 10 % (C) 15 % (D) 25 %

Last Answer : Answer: Option A

Description : A well seasoned timber may contain moisture up to (A) 4 to 6 % (B) 6 to 8 % (C) 8 to 10 % (D) 10 to 12 %

Last Answer : Answer: Option D

Description : At what distance must an object be placed from mirror in order that a real image double its size may be obtained? (a) -24 cm (b) 32 cm (c) -40 cm (d) 45 cm

Last Answer : (a) -24 cm

Description : The maximum allowable Los Angeles abrasion value for high quality surface course is (A) 10 % (B) 20 % (C) 30 % (D) 45 %

Last Answer : Answer: Option C

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

Description : Quartzite, a metamorphic stone is (A) Hard (B) Brittle (C) Crystalline (D) All the above

Last Answer : Answer: Option D

Description : Quartzite is a (A) Metamorphic rock (B) Argillaceous rock (C) Calcareous rock (D) Siliceous rock

Last Answer : Answer: Option D

Description : Which of the following metamorphic rocks has the most weather resisting characteristics? (A) Marble (B) Quartzite (C) Slate (D) Lime stone

Last Answer : Answer: Option B

Description : Which of the following represents a metamorphic rock? (i) Slate (ii) Shale (iii) Quartzite The correct answer is (A) Only (iii) (B) Both (i) and (iii) (C) Both (ii) and (iii) (D) All (i), (ii) and (iii)

Last Answer : Answer: Option B

Description : Which of the following sedimentary rocks changes into quartzite by metamorphic action? (A) Sand stone (B) Lime stone (C) Shale (D) Gypsum

Last Answer : Answer: Option A

Description : A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, ... current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Last Answer : Answer-C Basic Formula: Speed of the stream = ½ (a-b) km/hr Explanation: Let the speed in still water be x m/hr Speed of stream be y m/hr Then, speed upstream = x-y m/hr and Speed downstream = x+y m/hr 12/x-y - ... 1] 3y^2 = 8 y so, y = 8/3 speed of the current = 8/3 m/hr = 2 (2/3) m/hr

Description : Renewal of loose rivet shall be taken up in end bearing stiffener when the % of hammer loose rivet is

Last Answer : 30%

Description : Carbonic acid is extremely active in the chemical weathering of: w) feldspar x) quartz y) carbon z) quartzite

Last Answer : ANSWER: W -- FELDSPAR

Description : Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Last Answer : (D) 105° to 110°C

Description : If the average compressive strength is 4000 kg/cm2 and standard deviation is 500, the co-efficient of variation is (A) 10 % (B) 12.5 % (C) 15 % (D) 18.5%

Last Answer : Answer: Option B

Description : Pipe A can fill a water tank in 8 hours, Pipe B can fill the same tank in 12 hours and Pipe C can empty the tank in 24 hours. If all three pipes are opened together, in how many hours will the tank be completely filled or empty? a) 4.8 hours b) 5 hours c) 5.4 hours d) 6 hours e) 7.2 hours

Last Answer : If all the three pipes are opened together, in one hour they will fill 1/8 + 1/12 – 1/24 = (3+2-1)/24 = 1/6 part of tank. So, to fill it completely it will take 6 hours. Answer is: d)

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

Description : Pick up the incorrect statement from the following:  (A) The water entering the slow sand filters should be treated by 9.386 coagulants  (B) The depth of water on the filter should be twice the ... is 0.75 times the depth of filter sand, the water obtained is purest  (D) All the above 

Last Answer : (D) All the above 

Description : The weight of a pycnometer containing 400 g sand and water full to the top is 2150 g. The weight of pycnometer full of clean water is 1950 g. If specific gravity of the soil is 2.5, the water content is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (D) 20 %

Description : The percentage of minimum reinforcement of the gross sectional area in slabs, is (A) 0.10 % (B) 0.12 % (C) 0.15 % (D) 0.18 %

Last Answer : Answer: Option C

Description : Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Last Answer : Answer: Option D

Description : If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is (A) 10 % (B) 12 % (C) 15 % (D) 25%

Last Answer : Answer: Option D

Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Last Answer : Answer: Option B

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

Description : In a sedimentation tank, the detention period for water ranges from __________ hours. (A) 2 to 4 (B) 8 to 12 (C) 16 to 20 (D) 24 to 32

Last Answer : (A) 2 to 4

Description : Ampere hour capacity of an industrial battery is based on ……….hours discharge rate A. 8 B. 12 C. 16 D. 24

Last Answer : A. 8

Description : What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of ... that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Last Answer : d. 8 hours but it depends upon the amount of alcohol that has been consumed

Description : What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of ... that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Last Answer : d. 8 hours but it depends upon the amount of alcohol that has been consumed

Description : The pumping system should be capable of supplying the normal quantity of water required in 24 hours in a)12 hours or less b) 16 hours or less c) 20 hours or less* d) 8 hours or less

Last Answer : c) 20 hours or less*

Description : Find the number which when decreased by 24 % becomes 594. a) 625.8 b) 360.9 c) 465.7 d) 781.5 e) 398.5

Last Answer : Answer: D Let the number be m. Decrease = 24 % of m  = 24/100 × m = 6m /25 Therefore, decrease number = m – 6m/25 = (25m – 6m)/25 = 19m/25 According to the question 19m/25 = 594  19m = 594 × 25  19m = 14850  m = 14850/19  m =781.5

Description : The detention period for plain sedimentation water tanks, is usually  (A) 4 to 8 hours  (B) 8 to 16 hours  (C) 16 to 24 hours  (D) 24 to 36 hours

Last Answer : (D) 24 to 36 hours

Description : From the surface of reservoir, evaporation may be minimised by sprinkling (A) Spirit (B) Hydrochloric acid (C) Acetyl alcohol (D) Methane

Last Answer : (C) Acetyl alcohol

Description : Detention time for plain sedimentation tank usually ranges from (A) 2 to 4 hours (B) 4 to 8 hours (C) 6 to 10 hours (D) 8 to 12 hours

Last Answer : (B) 4 to 8 hours

Description : Maximum super-elevation on hill roads should not exceed (A) 5 % (B) 7 % (C) 8 % (D) 10 %

Last Answer : Answer: Option D

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Description : When a brick is immersed in water for 24 hours and then dried, if (A) No grey or white deposits appear on the surface, the brick is free from soluble salts (B) 10 percent surface is ... percent surface is covered with grey or white deposits, the brick has serious efflorescence (D) All the above

Last Answer : Answer: Option D

Description : Protein content in cow colostrum(%) a 10 b 12.8 c 14.7 d 16

Last Answer : b 12.8

Description : If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Last Answer : (D) 0.95

Description : The water content in a soil sample when it continues to loose weight without loosing the volume, is called (A) Shrinkage limit (B) Plastic limit (C) Liquid limit (D) Semi-solid limit

Last Answer : Answer: Option A

Description : What is the resulting concentration (in molL) of aqueous hydrochloric acid if 500 mL of its gaseous form at 300 K and 100 kPa will be dissolved in 100 mL pure water Use 8.314 kPaL(Kmol)?

Last Answer : Feel Free to Answer

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %