Should I buy a grounding strip before opening my computer and installing new RAM?

Should I buy a grounding strip before opening my computer and installing new RAM?
by

1 Answer

Answer :

No, but you should turn off and unplug your computer before opening it for any reason.
by

Related questions

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the switch box internals with epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Description : Moisture damage, as a result of condensation occurring inside of the cargo winch master switches, can be reduced by __________________. A. installing a light bulb in the pedestal stand B. coating the ... epoxy sealer C. venting the switch box regularly D. using strip heaters inside the switch box

Last Answer : Answer: D

Installing more RAM on a mac?

Description : Installing more RAM on a mac?

Last Answer : its very simple, I would never pay anyone to put RAM in, will take you litterally 5 mins…just make sure you get the right kind for the computer…pop the old out, put the new in…close case..voila you’re done!

Opening up a strip club...?

Description : Opening up a strip club...?

Last Answer : Yea, all them young college buzzers have nothing else to do on a Friday night. Why wouldn't any strip club not be successful? I live in a small city outside of Tuscawilla, and we have a small bar tucked ... I don't even know where they come from because my city is so small, just get the word out.

An adjustable resistor, whose resistance can be changed without opening the circuit in which it is connected, is called a _____________. A. bleeder resistor B. rheostat C. bridge D. variable shunt strip

Description : An adjustable resistor, whose resistance can be changed without opening the circuit in which it is connected, is called a _____________. A. bleeder resistor B. rheostat C. bridge D. variable shunt strip

Last Answer : Answer: B

Why must I always close all other programs before installing a new program?

Description : Why must I always close all other programs before installing a new program?

Last Answer : answer:Not as important anymore, but not a horrible idea. Basically all installed programs use some helpers from the operating system to get things done. If some of those helpers can't be accessed ... , it's mostly insurance to quit everything, but really cheap and easy insurance, so why not?

In case new installation is to be done, what basic guidelines should be followed for grounding?

Description : In case new installation is to be done, what basic guidelines should be followed for grounding?

Last Answer : a. Earthing conductors in outdoor areas shall be burried 500 mm below finished grade level unless stated otherwise.  b. Minimum 6000 mm spacing between rod pipe electrode shall be provided unless ... pipe or plate electrode treated earth pit, which in turn shall be connected to station earthing.  

Who should do the moisture test before installing hardwood floors?

Description : Who should do the moisture test before installing hardwood floors?

Last Answer : I think it would be in the best interest of all parties involved to get the test done to establish a baseline for the conditions at time of installation in case there is a ... think the paid professional would take on that responsibility of verifying the right conditions exist before proceeding.

How long should I wait before turning my iPhone on after installing the Invisible SHIELD screen protector?

Description : How long should I wait before turning my iPhone on after installing the Invisible SHIELD screen protector?

Last Answer : It’s safe to turn it on.

Do I have to take the “old” Linux off my netbook before installing Eeebuntu?

Description : Do I have to take the “old” Linux off my netbook before installing Eeebuntu?

Last Answer : If you have to ask, you might want to avoid Linux.

Things to Know Before Installing Zoysia Grass?

Description : Things to Know Before Installing Zoysia Grass?

Last Answer : A yard full of zoysia grass can be the envy of the neighborhoodif properly maintained. Originating in Southeast Asia, zoysia grasstakes its name from Karl von Zois, a plant specialist from Austria ... the small, thick, and compactblades of zoysia retain moisture, helping the grass to keep itsvibran

What do I need in order to prepare the ground before installing an above ground swimming pool?

Description : What do I need in order to prepare the ground before installing an above ground swimming pool?

Last Answer : You need to have your ground completely level. If it isn't level then you are going to have bumps and inconsistencies all over the bottom of your pool.

What should I know before installing floor tile?

Description : What should I know before installing floor tile?

Last Answer : You should know the measurements of the space to be tiled and the measurements of the tile that you plan to buy. Before installing tile you will need to repair any cracks, bumps or dips. ... instructions listed on the tiles you have picked out so make sure you read these carefully before starting.

What should I know before installing hardwood floors?

Description : What should I know before installing hardwood floors?

Last Answer : Before installing hardwood floors, you should know the size and costs of this project. YOu can find tips at http://www.hometips.com/diy-how-to/installing-hardwood-floors.html The most important thing to ... floor that is durable and will last for a long time. Also, low maintenance floors are great!

4 Points to Consider Before Installing Home Security Systems?

Description : 4 Points to Consider Before Installing Home Security Systems?

Last Answer : Choosing a Home Securityalarm system is not an easy job. It is after all a matter of protecting your home and family members. The market is full of many kinds of security systems, such as Hardwired ... Cameras, Home security. For more details log on to http://www.firsthomesecurity.co.uk/[video=]

Can I get information off my hard drive without installing it in a new computer?

Description : Can I get information off my hard drive without installing it in a new computer?

Last Answer : answer:You can remove the hard drive from the old macbook and connect it to the new machine with an inexpensive USB hard drive adapter. Here's one at Amazon for illustration. It might be more ... drive was set up, so their may be security/permissions issues. But the physical connection is easy.

Installing an old printer on a new computer?

Description : Installing an old printer on a new computer?

Last Answer : answer:Well, if that is the only driver you could find then you’re out of luck. I don’t know of any other way to work around that. How old is the printer? Did you speak with tech support for the printer or your computer?

Do you strip away the strings on the outside of celery before eating it?

Description : Do you strip away the strings on the outside of celery before eating it?

Last Answer : Nope. I trim the ends, right below the line where the leaves start, and most of the white part too. But that’s it, then I fill with almond butter.

Do I need to strip my cabinets before painting them or can I just scuff them up with sandpaper?

Description : Do I need to strip my cabinets before painting them or can I just scuff them up with sandpaper?

Last Answer : Chemical strip is easier than sanding, but messier and toxic. Your call. A light sanding; scuffing, might not leave a smooth surface to show off new paint.

Is grounding a teenager for bad grades an effective tool?

Description : Is grounding a teenager for bad grades an effective tool?

Last Answer : answer:It sounds like you are doing an amazing job actively trying to address the actual problem. Grounding someone doesn't make them a better student. Being involved with them does that's what you're ... of your involvement and doesn't put in the work, you'll know quickly and respond accordingly.

What does grounding an electrical plug actually do (and why do we ignore it)?

Description : What does grounding an electrical plug actually do (and why do we ignore it)?

Last Answer : I'm not an electrical expert by any means, but my understanding is that if something does go wrong in your connection (a short circuit or something), then the ground gives the outgoing electricity ... the end of the day, the ground is essentially connected to the same place as the neutral wire.

Does homeopathy have any grounding in scientific fact or is it entirely bogus? What fraction of Americans believe in it?

Description : Does homeopathy have any grounding in scientific fact or is it entirely bogus? What fraction of Americans believe in it?

Last Answer : according to wiki: “Claims of homeopathy’s efficacy beyond the placebo effect are unsupported by the collective weight of scientific and clinical evidence.” NHS

How do you track an electircal short in a bedroom that meets ARC grounding requirements?

Description : How do you track an electircal short in a bedroom that meets ARC grounding requirements?

Last Answer : First, let me state that I AM NOT an electrician. (although I've played one in my house on occasion) I would call the builder and let him know that HIS electrician has circumvented a ... should run new wiring to replace that bad segment. Good luck, and document conversations with the builder!!

Did the term "grounding" as a punishment for kids precede the same term for pilots being prevented from flying?

Description : Did the term "grounding" as a punishment for kids precede the same term for pilots being prevented from flying?

Last Answer : answer:No, but that’s something my dad would make a joke about. Example of one of my dad’s jokes: We were out to dinner and deciding whether to order the Zen Chicken. My dad said: “Can you think of anything Buddha?”

When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Description : When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Last Answer : Ans: A

Ground resistance should be designed such that: a) grounding resistance should be as low as possible b) grounding resistance should be as high as possible c) grounding resistance should be always zero d) none of the above

Description : Ground resistance should be designed such that: a) grounding resistance should be as low as possible b) grounding resistance should be as high as possible c) grounding resistance should be always zero d) none of the above

Last Answer : Ans: A

Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Description : Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Last Answer : Ans: D

Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets connecting a lifeboat and the vessel's electrical system must have threaded plugs. C. Machinery spaces must contain sufficient outlets for lighting all machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Description : Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets ... machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Last Answer : Answer: A

Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating each, and short circuiting the two commutator bars C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Description : Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating ... C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Last Answer : Answer: B

If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Description : If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Last Answer : Answer: B

WHAT is ZIG ZAG Grounding Transformer

Description : WHAT is ZIG ZAG Grounding Transformer

Last Answer : ANSWER: Three Single Phase Transformers can be connected to have a three phase Zig Zag Transformer. This system can be used for either grounding or developing a fourth WIRE from a three phase neutral. An example ... - three phase - three wire system to a 480Y/277 V - three phase - four wire system

Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Description : Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Last Answer : C. vertical antennas

Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Description : Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Last Answer : C. Marconi antenna

What is different between resistance grounding system and resistance earthing system?

Description : What is different between resistance grounding system and resistance earthing system?

Last Answer : In resistance grounding system the neutral point of the load is connected to the ground to carry the residual current in case of unbalanced conditions. Resistance earthing system is done in an electric equipment in order to protect the equipment in occurrence of fault in the system.

The lowest resistance grounding on earth A. Sand B. Clay C. Surface loam soil D. Limestone

Description : The lowest resistance grounding on earth A. Sand B. Clay C. Surface loam soil D. Limestone

Last Answer : C. Surface loam soil

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

How safety could be ensured by equipment grounding?

Description : How safety could be ensured by equipment grounding?

Last Answer : In order to enumerate this, let us first find out the effects of current and voltage developed during fault condition.

What is the important of equipment grounding?

Description : What is the important of equipment grounding?

Last Answer : Equipment earthing ensures safety. 

What is the important of system grounding?

Description : What is the important of system grounding?

Last Answer : It is important because: a. Earth fault protection is based on the method of neutral earthing. b. System voltage during earth fault depends on neutral earthing. c. It is a protection against arcing grounds, unbalanced voltages with respect to earth and lighting.

What does mean by equipment grounding?

Description : What does mean by equipment grounding?

Last Answer : Grounding of non-current carrying metallic parts is called equipment grounding. For instance no-current carrying parts include the following: a. Motor body, switchgear metal enclosure, transformer tank, conduits of ... c. Sheath of cables. d. Body of portable equipment such as iron, oven, etc.

What are types of grounding?

Description : What are types of grounding?

Last Answer : There are two types a. System grounding. b. Equipment grounding.

What is difference between earthing and grounding?

Description : What is difference between earthing and grounding?

Last Answer : Both have same meaning. The term earthing is used in U.K. and grounding in U.S.A.ground means earth.

What is grounding?

Description : What is grounding?

Last Answer : It is an electrical connection with the general mass of earth through an earth electrode. 

Why neutral breaker used in DG neutral grounding?

Description : Why neutral breaker used in DG neutral grounding?

Last Answer : In case of high earth fault currents it is therefore normal practice to install a circuit breaker in the neutral of the generator in order to reduce the total fault clearance time. 

Why resistance grounding preferred for less than 33 kV and more than 415 V?

Description : Why resistance grounding preferred for less than 33 kV and more than 415 V?

Last Answer : a) To limit the earth fault current for equipment safety else, high short ckt forces dislocate in windings/bus bars etc, b) Over voltage due to arcing ground reduced c) Permits earth fault protection (not possible in ungrounded system)

How neutral grounding adopted?

Description : How neutral grounding adopted? 

Last Answer : For above 3.3 kV and below 22 kV resistance grounding is preferred. In this voltage level capacitive ground current is not large, so reactance grounding is not used. For below 3.3 kV ... in transmission lines, generators etc. to neutralize capacitive current by adding reactive current.  

What are the types of Grounding?

Description : What are the types of Grounding? 

Last Answer : Equipment grounding is the grounding on non-current carrying metal parts. This is done for personnel safety of the operator and for the equipment safety by blowing the fuse when earth fault current flows ... Mainly there are three types of neutral earthing a) Directly b) Resistance c) Reactance 

Why not high resistance for earth fault than using grounding transformer & resistor 0.45 ohms?

Description : Why not high resistance for earth fault than using grounding transformer & resistor 0.45 ohms?

Last Answer : It is mechanically unwide. Difficult to manufacture.  

Why copper is only preferred as material for grounding?

Description : Why copper is only preferred as material for grounding?

Last Answer : An advantage of use of copper is in addition to their high conductivity, has the advantage of being resistant to underground corrosion. Copper is cathodic with respect to other metals that are ... and zinc reduces by about 50% and practically eliminates this potential with respect to lead.   

What are the specifications for procurement of grounding conductor and grounding rods?

Description : What are the specifications for procurement of grounding conductor and grounding rods?

Last Answer : Grounding conductor, pad, rods etc. should have following specifications: a. Copper : 91.8 to 94.9% b. Zinc : 2.0 to 3.0% c. Tin : 0.8 to 1.5% d. Lead : 2.0 to 2.5% e. Iron : 0.5 to ... : 0.3% maximum. b. Antimony : 0.3% maximum. c. Manganese : 0.04% maximum. d. Phosphorous : 0.04% maximum.