What is the peak power of the Kicker 08DS12L72?

What is the peak power of the Kicker 08DS12L72?
by

1 Answer

Answer :

The peak power of the Kicker 08DS12L72 is 1500 Watts.
by

Related questions

Apline Type-R or Kicker Solobaric L7?

Description : Apline Type-R or Kicker Solobaric L7?

Last Answer : When Kickers are pumping, they are literally heart stopping. I sat in a room with ONE solobaric hooked up to a 1000 watt monoblock amp, and I couldn’t breathe it was so loud and intense.

I just saw a football highlight from 1989 and the place kicker luis zendjas was smoking a cigarette on the sideline during the game has anyone else ever witnessed a professional athlete doing this?

Description : I just saw a football highlight from 1989 and the place kicker luis zendjas was smoking a cigarette on the sideline during the game has anyone else ever witnessed a professional athlete doing this?

Last Answer : Not since about 15–20 years ago.

Which is better? (1) Kicker L5 15" subwoofer or (2) Kicker L5 12"?

Description : Which is better? (1) Kicker L5 15" subwoofer or (2) Kicker L5 12"?

Last Answer : I’d take 2 12’s over one 15 any day. It really depends what you’re looking for. The 15 will be just plain loud, but two 12’s will most likely give you clearer, more punchy bass. Hope this helps!

Which is better kicker or pyle subwoofer?

Description : Which is better kicker or pyle subwoofer?

Last Answer : Kicker is a much better quality subwoofer than Pyle, and it will have much better bass as well.

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

During whose reign Maratha power was at the highest peak and power? -General Knowledge

Description : During whose reign Maratha power was at the highest peak and power? -General Knowledge

Last Answer : During the rule of SHIVAJI MAHARAJ maratha power was at it's highest peak and power.

During whose reign Maratha power was at the highest peak and power? -General Knowledge

Description : During whose reign Maratha power was at the highest peak and power? -General Knowledge

Last Answer : In 1674, Shivaji was crowned king of the Maratha Empire in a lavish ceremony at Raigad fort. After the 1761 Battle of Panipat, Malhar Rao Holkar attacked the Rajputs and defeated them at the battle of Mangrol. This largely restored Maratha power in Rajasthan.

What is the peak power of the Crunch Power Zone P18004 4-Channel Car Amplifier?

Description : What is the peak power of the Crunch Power Zone P18004 4-Channel Car Amplifier?

Last Answer : Its peak power is 1800W: 2 x 900 W @ 4 Ohms Maxx Power.

For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Description : For spark ignition engine, the equivalence ratio of mixture entering the combustion chamber has values (A) for idling and for peak power conditions (B) for both idling and peak power conditions (C) for idling and for peak power conditions (D) for both idling and peak power conditions

Last Answer : ANSWER (B) for both idling and peak power conditions

When voltage and current developed in an AC circuit reach their peak values at the same time, the power factor is _____________. A. lagging B. leading C. maximum D. minimum

Description : When voltage and current developed in an AC circuit reach their peak values at the same time, the power factor is _____________. A. lagging B. leading C. maximum D. minimum

Last Answer : Answer: C

When the voltage and the current developed in an AC circuit reach their peak values at the same time, the power factor is considered to be _____________. A. lagging B. leading C. unity D. infinity

Description : When the voltage and the current developed in an AC circuit reach their peak values at the same time, the power factor is considered to be _____________. A. lagging B. leading C. unity D. infinity

Last Answer : Answer: C

Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Description : Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Last Answer : Answer: B

Which is the proper measurement of average power emitted by a pulsed laser? a. Energy x time b. Pulse energy x repetition rate c. Pulse energy / repetition rate d. Peak power x pulse length

Description : Which is the proper measurement of average power emitted by a pulsed laser? a. Energy x time b. Pulse energy x repetition rate c. Pulse energy / repetition rate d. Peak power x pulse length

Last Answer : b. Pulse energy x repetition rate

In the American standard, the aural transmitter maximum radiated power is _____ of peak visual transmitter power. A. 10 % B. 30 % C. 20 % D. 40 %

Description : In the American standard, the aural transmitter maximum radiated power is _____ of peak visual transmitter power. A. 10 % B. 30 % C. 20 % D. 40 %

Last Answer : C. 20 %

In the European standard, the aurial transmitter maximum radiated power is ______ of peak visual transmitter power. A. 10% B. 30% C. 20% D. 40%

Description : In the European standard, the aurial transmitter maximum radiated power is ______ of peak visual transmitter power. A. 10% B. 30% C. 20% D. 40%

Last Answer : C. 20%

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power

Last Answer : A. Carrier power

How does a SSB transmitter output power normally expressed? A. Average power B. In terms of peak envelop power C. In terms of peak-to-peak power D. Peak power

Description : How does a SSB transmitter output power normally expressed? A. Average power B. In terms of peak envelop power C. In terms of peak-to-peak power D. Peak power

Last Answer : B. In terms of peak envelop power

Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Last Answer : C. Carrier power

lobes between end of the love at which the relative power is one half (-3dB) its value from the peak of the lobe. A. Bandwidth B. Wavelength C. Radiation D. Beamwidth

Description : Width measured in degrees of a major lobes between end of the love at which the relative power is one half (-3dB) its value from the peak of the lobe. A. Bandwidth B. Wavelength C. Radiation D. Beamwidth

Last Answer : D. Beamwidth

The product of the power supplied to the antenna and its gain relative to a half-wave dipole in a given direction. A. Peak envelope power B. ERP C. Rated power D. Carrier power’

Description : The product of the power supplied to the antenna and its gain relative to a half-wave dipole in a given direction. A. Peak envelope power B. ERP C. Rated power D. Carrier power’

Last Answer : B. ERP

Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor isA. 15.6 WB. 15 WC. 16 WD. 17 W

Description : Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor is A. 15.6 W B. 15 W C. 16 W D. 17 W

Last Answer : 15.6 W

What are the base load and peak load power stations?

Description : What are the base load and peak load power stations?  

Last Answer : During certain periods the load demands are very high. Example the morning when all factories operate. During these time certain power plants like thermal plants gives this extra power required. ... easily stopped or restated. Nuclear power station comes under Base load power station category.  

A runoff river plant (A) Is a medium head scheme (B) Generates power during peak hours only (C) Is suitable only on a perennial river (D) Has no pondage at all

Description : A runoff river plant (A) Is a medium head scheme (B) Generates power during peak hours only (C) Is suitable only on a perennial river (D) Has no pondage at all

Last Answer : Answer: Option C

Current levels of off-peak electric capacity are sufficient to power how much of our nations car and light-duty truck fleet? • 19% • 33% • 55% • 73%

Description : Current levels of off-peak electric capacity are sufficient to power how much of our nations car and light-duty truck fleet? • 19% • 33% • 55% • 73%

Last Answer : • 73%

The peak power of a radar depends on the interrelationship of what other factors?

Description : The peak power of a radar depends on the interrelationship of what other factors?

Last Answer : Average power, pulse width, and prt.

Which is the proper measurement of average power emitted by a pulsed laser? ∙ a. Energy x time ∙ b. Pulse energy x repetition rate ∙ c. Pulse energy / repetition rate ∙ d. Peak power x pulse length

Description : Which is the proper measurement of average power emitted by a pulsed laser? ∙ a. Energy x time ∙ b. Pulse energy x repetition rate ∙ c. Pulse energy / repetition rate ∙ d. Peak power x pulse length

Last Answer : ∙ b. Pulse energy x repetition rate

State why nuclear power plants are used as base load plants and diesel power plants as a peak load plant.

Description : State why nuclear power plants are used as base load plants and diesel power plants as a peak load plant. 

Last Answer : 1. Because of following points Nuclear power plant used as base load power plant:-  1. Nuclear power plants is very economical for producing bulk amount of electric power 2. Nuclear power plant is reliable ... . The plants can be put on load easily. 4. Diesel engines take less time to make OFF.

In a pure resistive circuit, the average power Pavg is _________ the peak power Pmax.

Description : In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

Last Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities...

Description : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 

Last Answer : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 103.2 MW, 51.61 .