What does a circuit board for LED lights look like?

What does a circuit board for LED lights look like?
by

1 Answer

Answer :

An LED circuit is very simple. First you have your DC in that should be around 3v, next a resistor to make sure it doesn't go over 2.8v-3v depending on your LED, then the LED itself, then the LED connected to the ground.
by

Related questions

Why do LED lights seem "digital" when you take your eyes off them?

Description : Why do LED lights seem "digital" when you take your eyes off them?

Last Answer : answer:That's because LEDs flash at the frequency of electricity (60Hz) which you can't normally see, but can see if you swish your head from side to side quickly. Whereas, incandescent bulbs have ... enough to stop glowing when the electric is shut off), so it stays hot and glows continuously.

LED lights on cars. If only one is out, can you be pulled over by police?

Description : LED lights on cars. If only one is out, can you be pulled over by police?

Last Answer : I wouldn’t think so. But I don’t know.

Make your room pitch black. Now how many little LED lights can you see?

Description : Make your room pitch black. Now how many little LED lights can you see?

Last Answer : Only 2

Make your room pitch black. Now how many little LED lights can you see?

Description : Make your room pitch black. Now how many little LED lights can you see?

Last Answer : Only 2

How to Choose the Best LED Grow Lights?

Description : How to Choose the Best LED Grow Lights?

Last Answer : An indoor plant or garden can be a great source of fresh air to a home's decor; it's like adding a little bit of nature into your own personal living space. Can grow vegetables indoors ... coverage ability. AND highly satisfied and large customer base. It has been engineered to direct the light

How to make LED lights ?

Description : How to make LED lights ?

Last Answer : Click on this link to watch the video of making LED lights practically. LED Light

Can LED lights be used legally to enhance a car's exterior?

Description : Can LED lights be used legally to enhance a car's exterior?

Last Answer : Well, there are actually many different types of LED lights that can be used to enhance your car's exterior legally. For example, Tailgate lighting, and so forth, though to be sure, such ... a legal standpoint. There are many different websites that offer them and different ways of mounting them.

Whats the difference between LED and halogen lights?

Description : Whats the difference between LED and halogen lights?

Last Answer : LED has a much better brightness factor than halogen. The comparison is mainly made in car lightsï ½ you can definitely tell which cars are LED and which are halogen. LED Light Bulbs last ... Halogen and fluorescent lights can wear down your finish and change the colors in pictures or paintings.

What does LED high bay lights mean?

Description : What does LED high bay lights mean?

Last Answer : High Bay lights are the light fittings used in large warehouses, street lights etc, where light fitting are placed at quite an height generally more than 7 to 8 mtr.

What do led ********* lights cost?

Description : What do led Christmas lights cost?

Last Answer : LED Christmas lights cost around 20 dollars for a set of 70, depending on where you look. They are most likely cheaper around Christmas Time, because various sales may be in place.

Are led tail lights better than normal tail lights?

Description : Are led tail lights better than normal tail lights?

Last Answer : The only difference between LED lights and normal lights is that LED lights are much brighter and are a brighter white than normal lights. Some find the brighter lights better, while others find the lights too bright.

What are the benefits of using LED lights over incandescent lights?

Description : What are the benefits of using LED lights over incandescent lights?

Last Answer : From what I could find in my research LED lights seem to be brighter and easier on your cars charging system. They are placed inside the headlamp against a silver backing that also helps make them brighter.

The front panel display provides lights as green LED represent sand red LED represent _ for device programmer who writes input/output basic: a. Busy and Error b. Error and Busy c. Busy and Busy d. Error and Error

Description : The front panel display provides lights as green LED represent sand red LED represent _ for device programmer who writes input/output basic: a. Busy and Error b. Error and Busy c. Busy and Busy d. Error and Error

Last Answer : a. Busy and Error

IOT devices are various types, for instance______________. A. Wearable sensors. B. Smart watches. C. LED lights. D. All of the above

Description : IOT devices are various types, for instance______________. A. Wearable sensors. B. Smart watches. C. LED lights. D. All of the above

Last Answer : D. All of the above 

Penny board Led

Description : Hello, I would like to improve my pennyboard with LED tape backlight, as this guy has it, https://www.youtube.com/watch. It also has a 12V strip and 2 9V batteries and it works. But on one ... know : ..Led pásek http://ledpasky.com/led-pasek-3528-epistar-mo...Děkuji všech pro odpovědi SparkyCZ

Last Answer : LED lights are sensitive to surges. 2x9V = 18V which means they have 1/2 higher voltage than necessary. I do not recommend. Accumulators or batteries with a total voltage of 12V are suitable.

If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?

Description : If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?

Last Answer : Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.

When a home circuit brackropens why do some lights turn off and others stay on. why?

Description : When a home circuit brackropens why do some lights turn off and others stay on. why?

Last Answer : Need answer

In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' and '3' would would burn dimly, while branch '2' would burn normally C. '1', '2', and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Description : In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' ... and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Last Answer : Answer: D

Will you go out tonight, 2014/01/09, to look at the Northern Lights?

Description : Will you go out tonight, 2014/01/09, to look at the Northern Lights?

Last Answer : Definitely won’t be able to see them in LA county :( I’m envious of everyone up north.

How does the outside of your house look in terms of ********* lights & so forth?

Description : How does the outside of your house look in terms of Christmas lights & so forth?

Last Answer : My own is pitiful (one light up Santa and a string of white bulbs), I’m not really into the lights and stuff, I think it’s obnxious.

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

Sir , if there are 9 LEDs connected in series with the 9 volt battery and each led has a forward voltage drop of 1 volt , do i need a resistor in the circuit (in series with led)?

Description : 9 leds each of 1 volt drop is series with 9  volt battery , do we need a resistor?(SMD leds) I have seen some smd leds without resistor !

Last Answer : We connect resistor to limit the current. So, it depends upon the current rating of the LED, which is provided by manufacturer.

What is the word in the blank. (7 letters)He has a - - - - led look on his face because he doesn’t understand.?

Description : What is the word in the blank. (7 letters)He has a - - - - led look on his face because he doesn’t understand.?

Last Answer : Puzzled

What does it look like behind the puzzle board on Wheel of Fortune?

Description : What does it look like behind the puzzle board on Wheel of Fortune?

Last Answer : I would imagine just a mess of wires and electronics.

What does the average day of a billionaire business owner look like? Clearly someone like Bezos or Zuckerberg don’t have to wake up the way their employees do but are the constantly flying all over for meetings and stuff or just living like rich assholes while board members keep Amazon/FB running?

Description : What does the average day of a billionaire business owner look like? Clearly someone like Bezos or Zuckerberg don’t have to wake up the way their employees do but are the constantly flying all over for meetings and stuff or just living like rich assholes while board members keep Amazon/FB running?

Last Answer : Most likely both.

Electric circuit board and laser game for PC back during Windows 95ish?

Description : Electric circuit board and laser game for PC back during Windows 95ish?

Last Answer : answer:Makes me think of Laser Chess, but not quite, eh? It’s a physical game, right, not a computer game with pictures of the things you describe?

What is the main printed circuit board of a computer called ?

Last Answer : The main printed circuit board of a computer is called mother board.

I need to design a circuit board diagram I will add

Description : I need to design a printed circuit board

Last Answer : I used to play this game as a radio amateur. But it was for analog technology. Digital is a phenomenon, but usually it is not possible without multilayer connections. Today, there are a ... t fit horizontally, it went upright, but SMD technology requires precision in printed circuit boards as well.

Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Description : Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Last Answer : Answer : B

A thin plate or board that contains electronic components is called ___________ A. Hard Disk B. RAM C. ROM D. Circuit Board

Description : A thin plate or board that contains electronic components is called ___________ A. Hard Disk B. RAM C. ROM D. Circuit Board

Last Answer : D. Circuit Board

The main circuit-board of the system unit is _______ (A) RAM (B) Mother Board (C) Hard disk (D) None of the Above

Description : The main circuit-board of the system unit is _______ (A) RAM (B) Mother Board (C) Hard disk (D) None of the Above

Last Answer : (B) Mother Board

A reverse-current relay will prevent AC generator motorization by ____________. A. automatically redirecting the load B. automatically speeding up the prime mover C. tripping the panel board main switch D. tripping the generator circuit breaker

Description : A reverse-current relay will prevent AC generator motorization by ____________. A. automatically redirecting the load B. automatically speeding up the prime mover C. tripping the panel board main switch D. tripping the generator circuit breaker

Last Answer : Answer: D

When troubleshooting a console circuit card which is suspected of being faulty, the first step would be to _____. A. pull the card and measure the value of all resistors B. check for the correct value and polarity of all power connections to the card C. de-energize and pull the card to visually inspect for burned components D. check for continuity of circuit board traces and then the gain of each transistor

Description : When troubleshooting a console circuit card which is suspected of being faulty, the first step would be to _____. A. pull the card and measure the value of all resistors B. check for the ... for burned components D. check for continuity of circuit board traces and then the gain of each transistor

Last Answer : Answer: C

To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Description : To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Last Answer : Answer: B

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Description : In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Last Answer : Answer: B

Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic fluxes would cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Description : Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic ... cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Last Answer : Answer: B

ECE Board Exam March 1996 What is the purpose of the receiver’s squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent fluctuations in the AGC bias level C. To reduce the receiver’s sensitivity to all incoming signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Description : ECE Board Exam March 1996 What is the purpose of the receiver's squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent ... signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Last Answer : D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

ECE Board Exam March 1996 Crosstalk coupling is ___________. A. dBm (disturbing pair) minus dBm (disturbed pair) B. the difference between readings on a cable pair with a tone and a cable pair without tone read at the far end of a cable C. signals from one circuit that get into another circuit D. All of these are true

Description : ECE Board Exam March 1996 Crosstalk coupling is ___________. A. dBm (disturbing pair) minus dBm (disturbed pair) B. the difference between readings on a cable pair with a tone and a cable pair without ... a cable C. signals from one circuit that get into another circuit D. All of these are true

Last Answer : D. All of these are true

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : Motherboard

Motherboard is a: a) A board which connects only CPU and Keyboard b) A circuit board which connects all the elements c) Keyboard otherwise known as motherboard d) CPU's Circutary e) None of These

Description : Motherboard is a: a) A board which connects only CPU and Keyboard b) A circuit board which connects all the elements c) Keyboard otherwise known as motherboard d) CPU's Circutary e) None of These

Last Answer : b) A circuit board which connects all the elements

The mother board contains various________: a) Integrated System b) Integrated Circuit c) Internal Resource d) None of These

Description : The mother board contains various________: a) Integrated System b) Integrated Circuit c) Internal Resource d) None of These

Last Answer : b) Integrated Circuit

PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Description : PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Last Answer : c) Both of The Above

Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Description : Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Last Answer : Microminiature repair technician.

When does most printed circuit board damage occur?

Description : When does most printed circuit board damage occur?

Last Answer : During disassembly or repair.