Would a hydraulic hoist still work as well if the fluid was replaced with air?

Would a hydraulic hoist still work as well if the fluid was replaced with air?
by

1 Answer

Answer :

No, air is compressible, hydraulic fluid is not.It would be analogous to trying to use a giant rubber bandinstead of a steel crowbar to pry things apart!
by

Related questions

If the output piston is a car hoist was replaced by a piston of twice the area what would happen to the output force?

Description : If the output piston is a car hoist was replaced by a piston of twice the area what would happen to the output force?

Last Answer : What is the answer ?

George was cleaning the windows on the eighteenth floor of an office block when there was a massive power failure. The electric hoist on his platform was immoblized.So how did he manage to get down before the power was restored? -Riddles

Description : George was cleaning the windows on the eighteenth floor of an office block when there was a massive power failure. The electric hoist on his platform was immoblized.So how did he manage to get down before the power was restored? -Riddles

Last Answer : George walked down the stairs. He was cleaning the inside of the windows.

What is a hoist?

Description : What is it used for?

Last Answer : The hoist is (originally) a simple device for lifting loads. This "invention" is already attributed to Archimedes. http://cs.wikipedia.org/wiki/Kladka#Kladkostroj

What does a hospital hoist weigh?

Description : What does a hospital hoist weigh?

Last Answer : Feel Free to Answer

When raising a vehicle on a hoist how should it be positioned?

Description : When raising a vehicle on a hoist how should it be positioned?

Last Answer : Feel Free to Answer

Is the installation of live boom on hoist recommended?

Description : Is the installation of live boom on hoist recommended?

Last Answer : is the installation of live boom on hoist recommened

Engine Hoist Rental?

Description : Engine Hoist Rental?

Last Answer : form_title= Engine Hoist Rental form_header= Safely raise and lower your engine when working on your car. What size engine do you have?*= _ [50] Do you need an engine stand?*= () Yes () No How long do you need the hoist?*= _ [50]

The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. contactor coil '3M' has many shorted turns B. resistor 'R8-A2' has an open C. contacts '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Description : The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. ... '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Last Answer : Answer: B

The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults could be the cause? EL-0102 A. Master switch contact 'MS3' may have defective springs. B. Contactor '3M' coil could have an open winding. C. Contact '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Last Answer : Answer: A

Which of the listed conditions occur when selection is made for 'third point hoist' on the winch shown in the illustration? EL-0102 A. Master switch contacts '5', '6', '7', '8', and '9' close. B. Contactors '2M', '3M', '4M' and '1A' pick up. C. Contactors '1M', 3M', '1A' and '2A' drop out. D. Master switch contacts '3','4', '6', '8', and '9' close.

Description : Which of the listed conditions occur when selection is made for 'third point hoist' on the winch shown in the illustration? EL-0102 A. Master switch contacts '5', '6', '7', '8', and '9' close. B. Contactors '2M', ' ... ' and '2A' drop out. D. Master switch contacts '3','4', '6', '8', and '9' close.

Last Answer : Answer: D

The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to obtain required speeds B. divert shunt field current for speed control in both directions of operation C. limit armature current in hoist and 'series field' current in lower to obtain required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Description : The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to ... required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Last Answer : Answer: C

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

Splines are commonly used in (A) Machine tool gear box (B) Automobile gear box (C) Hoist and crane gear box (D) Bicycle

Description : Splines are commonly used in (A) Machine tool gear box (B) Automobile gear box (C) Hoist and crane gear box (D) Bicycle

Last Answer : (B) Automobile gear box

What is Hoist Brake ?

Description : What is Hoist Brake ?

Last Answer : Elevators are wondrous things. Without them, climbing up to the top of the Empire State Building or the Eiffel Tower would be almost impossible. Building them would have been very difficult in the ... greatly from them. Elevators are just one of the many inventions made possible with hoist brakes.

In case of travelling cranes, the motor preferred for boom hoist is _________.

Last Answer : In case of travelling cranes, the motor preferred for boom hoist is slip ring induction motor.

What causes black fluid in reservoir for hydraulic clutch on 99 Honda crv?

Description : What causes black fluid in reservoir for hydraulic clutch on 99 Honda crv?

Last Answer : Contaminated fluid. Should be flushed more often.

What is a good hydraulic fluid for a 285 Massey Ferguson?

Description : What is a good hydraulic fluid for a 285 Massey Ferguson?

Last Answer : What is the answer ?

What kind of hydraulic fluid goes in a 1969 Ford 4000 diesel Tractor transmission?

Description : What kind of hydraulic fluid goes in a 1969 Ford 4000 diesel Tractor transmission?

Last Answer : Need answer

Earthworms have no skeleton but during burrowing, the anterior end becomes turgid and acts as a hydraulic skeleton. It is due to (a) gut peristalsis (b) setae (c) coelomic fluid (d) blood.

Description : Earthworms have no skeleton but during burrowing, the anterior end becomes turgid and acts as a hydraulic skeleton. It is due to (a) gut peristalsis (b) setae (c) coelomic fluid (d) blood.

Last Answer : (c) coelomic fluid

Hydraulic __________ works on the principle of Pascal's law of transmission of fluid pressure. (A) Press (B) Turbine (C) Pump (D) Coupling

Description : Hydraulic __________ works on the principle of Pascal's law of transmission of fluid pressure. (A) Press (B) Turbine (C) Pump (D) Coupling

Last Answer : (A) Press

The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Description : The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Last Answer : Answer: Option A

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

Which of the following is true of loss of gastrointestinal secretions? A. Gastric losses are best replaced with a balanced salt solution. B. Potassium supplementation is unnecessary in replacement of gastric secretions. C. Bicarbonate wasting is an unusual complication of a high-volume pancreatic fistula. D. Balanced salt solution is a reasonable replacement fluid for a small bowel fistula. E. A patient with persistent vomiting usually requires hyperchloremic replacement fluids.

Description : Which of the following is true of loss of gastrointestinal secretions? A. Gastric losses are best replaced with a balanced salt solution. B. Potassium supplementation is unnecessary in ... bowel fistula. E. A patient with persistent vomiting usually requires hyperchloremic replacement fluids.

Last Answer : Answer: DE DISCUSSION: Gastric secretions are relatively high in chloride and potassium. Other than an isolated pancreatic fistula, gastrointestinal tract losses below the pylorus ... Although potassium concentrations are low, copious losses require potassium supplementation to prevent hypokalemia

Could BP's closing off the well create a hydraulic hammer?

Description : Could BP's closing off the well create a hydraulic hammer?

Last Answer : answer:That is why they closed the valves off gradually, to allow the pressure to build up slowly. Also - this is not entirely hydraulic. There is a considerable amount of methane in the flow, which ... Potentially, you have more of a blowout risk from the gas pressure than you do from the oil.

The well through which water comes out through hydraulic pressure is called – (1) Ordinary well (2) Tube well (3) Deep tube well (4) Artesian well

Description : The well through which water comes out through hydraulic pressure is called – (1) Ordinary well (2) Tube well (3) Deep tube well (4) Artesian well

Last Answer : (4) Artesian well Explanation: Artesian Well refers to a type of well that normally gives a continuous flow, the water being forced upwards by hydraulic pressure.

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

The well through which water comes out through hydraulic pressure is called (1) Ordinary well (2) Tube well (3) Deep tube well (4) Artesian well

Description : The well through which water comes out through hydraulic pressure is called (1) Ordinary well (2) Tube well (3) Deep tube well (4) Artesian well

Last Answer : Artesian well

Good evening, I have a cell phone Huawei y6 prime 2018 is replaced dysplejale still does not work touch. Don't know what it could be?

Description : My friend's cell phone didn't want to change display + touch, he gave it to me for free. Now the display has been replaced but the touch still doesn't work. Can anyone advise me what it could be? Thank you

Last Answer : Need Answer

(3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of aluminium- and ironcontaining clinker phases and other compounds. The ratio of CaO to SiO2 shall not be less than 2.0. The magnesium oxide content (MgO) shall not exceed 5.0% by mass. Cement sets when mixed with water by way of a complex series of chemical reactions still only partly understood.

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

How would you feel if you bought a well thought out gift for someone and they gave it to someone else and replaced it with a better version?

Description : How would you feel if you bought a well thought out gift for someone and they gave it to someone else and replaced it with a better version?

Last Answer : answer:Not hurt. Next time probably would give them money, or try to find out exactly what they wanted.

My mailbox is gone. Will I still get mail delivered to me while I am waiting for it to get replaced?

Description : My mailbox is gone. Will I still get mail delivered to me while I am waiting for it to get replaced?

Last Answer : The post office requires a “Box or receptacle” for mail. Read the LAST LINE. Contact the post office to hold your mail until a replacement is put in by your neighbor or their insurance company.

Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and discharged only a limited number of times without damage to the cells. C. Nickel-cadmium batteries can be stored for a long time and still keep a full charge without additional charging. D. The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Description : Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and ... The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Last Answer : Answer: C

Pick up the correct statement from the following: (A) Air lift pumps are generally used for pumping water from deep wells (B) Jet pumps are generally used for pumping water from small wells (C) The hydraulic ram works on the principle of water hammer (D) All the above

Description : Pick up the correct statement from the following: (A) Air lift pumps are generally used for pumping water from deep wells (B) Jet pumps are generally used for pumping water from small wells (C) The hydraulic ram works on the principle of water hammer (D) All the above

Last Answer : (D) All the above

With air in the hydraulic system you would

Description : With air in the hydraulic system you would

Last Answer : B. bleed the air out of the system

With air in the hydraulic system, you would: a. Ignore it because normal operation would remove it b. Bleed the air out of the system c. Allow the accumulator to auto

Description : With air in the hydraulic system, you would: a. Ignore it because normal operation would remove it b. Bleed the air out of the system c. Allow the accumulator to auto

Last Answer : b. Bleed the air out of the system

With air in the hydraulic system, you would: a. Ignore it because normal operation would remove it b. Bleed the air out of the system c. Allow the accumulator to auto

Description : With air in the hydraulic system, you would: a. Ignore it because normal operation would remove it b. Bleed the air out of the system c. Allow the accumulator to auto

Last Answer : b. Bleed the air out of the system

What is air pressure charge in hydraulic accumulators in A321?

Description : What is air pressure charge in hydraulic accumulators in A321?

Last Answer : The three system accumulators are pressurized with N2 to a pressure of 1950 psi. The brake accumulator is pressurized to 1200 psi pressure.

.In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Last Answer : A. Liquid pressure and the nozzle characteristics

In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Last Answer : a) Liquid pressure and the nozzle characteristics

Compare between hydraulic and air braking system with justification.

Description : Compare between hydraulic and air braking system with justification.

Last Answer : Compare between hydraulic and air braking system with justification.

My (soon-to-be-replaced) air conditioner is frequently tripping the circuit breaker in my apartment. What can I do to prevent this?

Description : My (soon-to-be-replaced) air conditioner is frequently tripping the circuit breaker in my apartment. What can I do to prevent this?

Last Answer : answer:A mini-split AC unit will use less power than a regular square version and should help with the problem. However if your problem resides in old wiring with a lower amperage/threshold you might ... every time you want to use it but this has cut my electric bill dramatically. Hope this helps

What parts on an air conditioner need to be replaced often?

Description : What parts on an air conditioner need to be replaced often?

Last Answer : The filters are what needs to be replaced most often on the air conditioning units.

Do air purifiers have filters that need to be changed or replaced?

Description : Do air purifiers have filters that need to be changed or replaced?

Last Answer : Some air purifiers do require a filter to be changed others have a filter that can be cleaned.

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

An air dielectric is replaced with a glass dielectric inside a capacitor of fixed dimensions. Relatively speaking, what will happen to the quantity of charge the capacitor can hold after the glass is inserted?

Description : An air dielectric is replaced with a glass dielectric inside a capacitor of fixed dimensions. Relatively speaking, what will happen to the quantity of charge the capacitor can hold after the glass is inserted?

Last Answer : ANSWER: IT IS INCREASED WITH THE GLASS DIELECTRIC

How does a hydraulic pump work for a tractor?

Description : How does a hydraulic pump work for a tractor?

Last Answer : The abilities of a hydraulic pump are: enhance work productivity, faster cycle times and higher possible pressure. Taken from Yahoo Search Results page.

How does a tractor hydraulic pump work?

Description : How does a tractor hydraulic pump work?

Last Answer : All hydraulic pumps are "positive displacement pumps." But there are many different types, gear, rotary, screw, etc. To answer your question, you would need to specify which type you are referring to.

Hydraulic brakes in automobiles work on

Description : Hydraulic brakes in automobiles work on

Last Answer : Pascal's principle