If the output piston is a car hoist was replaced by a piston of twice the area what would happen to the output force?

If the output piston is a car hoist was replaced by a piston of twice the area what would happen to the output force?
by

1 Answer

Answer :

What is the answer ?
by

Related questions

Would a hydraulic hoist still work as well if the fluid was replaced with air?

Description : Would a hydraulic hoist still work as well if the fluid was replaced with air?

Last Answer : No, air is compressible, hydraulic fluid is not.It would be analogous to trying to use a giant rubber bandinstead of a steel crowbar to pry things apart!

The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame’s equation. Diameter of the cylinder is 40mm and pressure in cylinder is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Description : The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame's equation. Diameter of the cylinder is 40mm and ... is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Last Answer : c) 5.07mm

George was cleaning the windows on the eighteenth floor of an office block when there was a massive power failure. The electric hoist on his platform was immoblized.So how did he manage to get down before the power was restored? -Riddles

Description : George was cleaning the windows on the eighteenth floor of an office block when there was a massive power failure. The electric hoist on his platform was immoblized.So how did he manage to get down before the power was restored? -Riddles

Last Answer : George walked down the stairs. He was cleaning the inside of the windows.

What is a hoist?

Description : What is it used for?

Last Answer : The hoist is (originally) a simple device for lifting loads. This "invention" is already attributed to Archimedes. http://cs.wikipedia.org/wiki/Kladka#Kladkostroj

What does a hospital hoist weigh?

Description : What does a hospital hoist weigh?

Last Answer : Feel Free to Answer

When raising a vehicle on a hoist how should it be positioned?

Description : When raising a vehicle on a hoist how should it be positioned?

Last Answer : Feel Free to Answer

Is the installation of live boom on hoist recommended?

Description : Is the installation of live boom on hoist recommended?

Last Answer : is the installation of live boom on hoist recommened

Engine Hoist Rental?

Description : Engine Hoist Rental?

Last Answer : form_title= Engine Hoist Rental form_header= Safely raise and lower your engine when working on your car. What size engine do you have?*= _ [50] Do you need an engine stand?*= () Yes () No How long do you need the hoist?*= _ [50]

The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. contactor coil '3M' has many shorted turns B. resistor 'R8-A2' has an open C. contacts '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Description : The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. ... '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Last Answer : Answer: B

The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults could be the cause? EL-0102 A. Master switch contact 'MS3' may have defective springs. B. Contactor '3M' coil could have an open winding. C. Contact '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Last Answer : Answer: A

Which of the listed conditions occur when selection is made for 'third point hoist' on the winch shown in the illustration? EL-0102 A. Master switch contacts '5', '6', '7', '8', and '9' close. B. Contactors '2M', '3M', '4M' and '1A' pick up. C. Contactors '1M', 3M', '1A' and '2A' drop out. D. Master switch contacts '3','4', '6', '8', and '9' close.

Description : Which of the listed conditions occur when selection is made for 'third point hoist' on the winch shown in the illustration? EL-0102 A. Master switch contacts '5', '6', '7', '8', and '9' close. B. Contactors '2M', ' ... ' and '2A' drop out. D. Master switch contacts '3','4', '6', '8', and '9' close.

Last Answer : Answer: D

The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to obtain required speeds B. divert shunt field current for speed control in both directions of operation C. limit armature current in hoist and 'series field' current in lower to obtain required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Description : The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to ... required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Last Answer : Answer: C

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

Splines are commonly used in (A) Machine tool gear box (B) Automobile gear box (C) Hoist and crane gear box (D) Bicycle

Description : Splines are commonly used in (A) Machine tool gear box (B) Automobile gear box (C) Hoist and crane gear box (D) Bicycle

Last Answer : (B) Automobile gear box

What is Hoist Brake ?

Description : What is Hoist Brake ?

Last Answer : Elevators are wondrous things. Without them, climbing up to the top of the Empire State Building or the Eiffel Tower would be almost impossible. Building them would have been very difficult in the ... greatly from them. Elevators are just one of the many inventions made possible with hoist brakes.

In case of travelling cranes, the motor preferred for boom hoist is _________.

Last Answer : In case of travelling cranes, the motor preferred for boom hoist is slip ring induction motor.

What would happen if we replaced 20% of our atmosphere's nitrogen with neon?

Description : What would happen if we replaced 20% of our atmosphere's nitrogen with neon?

Last Answer : I would be like “Whoa!”

What would happen if a trickster alien replaced the Sun with a black hole of the same mass? -Space

Description : What would happen if a trickster alien replaced the Sun with a black hole of the same mass? -Space

Last Answer : Our Sun is too small a star to end its life as a black hole. But what would happen if the Sun were suddenly replaced with a black hole of the same mass? Contrary to popular belief, the Solar System would not be sucked in: a solar-mass black hole would exert no more gravitational pull than our Sun.

An air dielectric is replaced with a glass dielectric inside a capacitor of fixed dimensions. Relatively speaking, what will happen to the quantity of charge the capacitor can hold after the glass is inserted?

Description : An air dielectric is replaced with a glass dielectric inside a capacitor of fixed dimensions. Relatively speaking, what will happen to the quantity of charge the capacitor can hold after the glass is inserted?

Last Answer : ANSWER: IT IS INCREASED WITH THE GLASS DIELECTRIC

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

Which of the following expresses the relationship of the input and output frequencies in a full wave rectifier? A. The output frequency is the same as input frequency. B. The output frequency is one-half the input frequency. C. The output frequency is twice the input frequency. D. The output frequency is four times the input frequency.

Description : Which of the following expresses the relationship of the input and output frequencies in a full wave rectifier? A. The output frequency is the same as input frequency. B. The output frequency is ... frequency is twice the input frequency. D. The output frequency is four times the input frequency.

Last Answer : Answer: C

If the output filter capacitor in a power supply actually had a value twice its stated value, which of the

Description : If the output filter capacitor in a power supply actually had a value twice its stated value, which of the following symptoms would be found?   a. The output voltage would be doubled and a small ... would be greater than expected.  d. The output and ripple voltage would be less than expected.

Last Answer : b. The ripple voltage would be half of what is expected and a small increase in the output voltage would be detected. 

Can you imagine if this would happen twice in exploration? ( Details Inside )

Description : Can you imagine if this would happen twice in exploration? ( Details Inside )

Last Answer : answer:I can imagine it and it’s amazing and with the universe being trillions upon trillions miles wider than our tiny baby Earth it would probably happen billions of times. :D

Engineering Piston Question?

Description : Engineering Piston Question?

Last Answer : I don’t believe you have enough information to figure this out. Normally those pistons provide damping that slows the action down. A gas charge by itself would make the piston move very rapidly so damping must be added. The damping properties need to be known.

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

What is the speed of the piston in the cylinder of a petrol engine ?

Description : What is the speed of the piston in the cylinder of a petrol engine ?

Last Answer : The speed of the piston in the cylinder of a petrol engine is also the speed of the alternator.

City 100 Of Ring , piston, Timing Chain Change To do How much? Money Need it ?

Last Answer : How much ? Money It takes That Specified By To say Possible No. Of parts Quality And Displacement Different Price To be Can However Yours Talk According to All in all Approx Max 2,000 - 3,000 _ _ _ _ Money To take Can

Where to buy an electrically operated piston?

Description : Hello, where can I buy an electric piston?

Last Answer : Wouldn't you like to get a little divorced? Few people will understand what you're doing ...

Can I replace the piston rings?

Description : Is it very difficult to replace the piston rings at the roof? Mustang 50.

Last Answer : I also changed them for the first time and I did it. The worst was the loosening of the screws on his head.

New piston rings for java 50.

Description : I replaced the piston 50 Mustang piston rings and now the head is overheating terribly. I just drive for 2 minutes and it's overheated that I'm smoking and the bike can't start. After cooling, it ... and rides again for 2 minutes before overheating. He's been doing it since I put new piston rings.

Last Answer : How much have you driven since the exchange? And - you just changed the rings - or the whole set (+ cut)? Anyway - now you are running the engine, so you should lubricate more (approx. 1:20), do ... anti-knock gap, the tightness of the cylinder head ... And don't forget to clean the exhaust. ;-)

buick 2005 lacross / how to compress rear calliper piston when changing brakes

Description : buick 2005 lacross / how to compress rear calliper piston when changing brakes

Last Answer : Need Answer

A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single stage irreversible process. If the

Description : A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single stage irreversible process. If the

Last Answer : A liquid which is confined inside an adiabatic piston is suddently taken from state `-1` to state `-2` by a single ... (0)` D. `DeltaU = -3P_(0)V_(0)`

The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Description : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Last Answer : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing ... 0 C. `W = -P Delta V` D. None

A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Description : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Last Answer : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37. ... J` D. `q= +208 J, w=+208 J`

Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Description : Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Last Answer : Consider a sample of a gas in a cylinder with a movable piston. Show digramatically the changes in ... pressure is decreased from 4 bar to 3 bar.

Where might you find a cam actuated radial piston pump on a highway truck?

Description : Where might you find a cam actuated radial piston pump on a highway truck?

Last Answer : Fuel

If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Description : If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Last Answer : -1

The domestic refrigerator uses following type of compressor (a) centrifugal (b) axial (c) miniature sealed unit (d) piston type reciprocating

Description : The domestic refrigerator uses following type of compressor (a) centrifugal (b) axial (c) miniature sealed unit (d) piston type reciprocating

Last Answer : Ans: d

In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Description : In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Last Answer : ANSWER : C

The energy of expanding gas is transferred by piston to connecting rod through a. Crank pin b. Gudgeon pin c. Bearing d. Crankcase (Ans:b)

Description : The energy of expanding gas is transferred by piston to connecting rod through a. Crank pin b. Gudgeon pin c. Bearing d. Crankcase (Ans:b)

Last Answer : Which of the following is not used in four stroke compression-ignition (CI) engines? a. Fuel pump b. Spark plug c. Fuel injector d. Inlet and outlet Valves (Ans:b)

Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Description : Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Last Answer : ANSWER c. 2 x stroke x rpm

Linear motion of the piston in a heat engine is converted into circular motion by

Description : Linear motion of the piston in a heat engine is converted into circular motion by

Last Answer : Crankshaft.

Forward movement of a piston in a steam engine is called

Description : Forward movement of a piston in a steam engine is called

Last Answer : expansion stroke.

In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

Description : In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

Last Answer : When the petrol-air mixture is ignited, carbon dioxide, carbon monoxide and water vapour expands suddenly. This exerts a great force on the piston.

Give reason: Steam exerts great pressure on the walls of the piston during expansion stroke.

Description : Give reason: Steam exerts great pressure on the walls of the piston during expansion stroke.

Last Answer : As steam occupies much larger volume than the same amount of water, it exerts great pressure on the walls of the piston.

The piston pin bearings in heavy-duty diesel engines are (a) needle roller bearings (b) tapered roller bearings (c) spherical roller bearings (d) cylindrical roller bearings

Description : The piston pin bearings in heavy-duty diesel engines are (a) needle roller bearings (b) tapered roller bearings (c) spherical roller bearings (d) cylindrical roller bearings

Last Answer : (a) needle roller bearings

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints