Is 0.665 greater than 0.66?

1 Answer

Answer :

Yes, 0.665 > 0.66

Related questions

Description : If the static deflection is 1.665×10 -3 m, calculate the critical speed of the shaft in rps. Centre of disc at 0.25m away from centre of axis of shaft. A. 8.64 B. 9.64 C. 10.64 D. 12.2

Last Answer : D. 12.2

Description : A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m ... collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Last Answer : (D) 0.060 m

Description : What is 2.665 rounded to the nearest hundredth?

Last Answer : 2.67

Description : What is 2.665 round to the nearest hundredth?

Last Answer : 2.67

Description : I have a Kenmore Ultra Bake electric oven, model # 665.95142300. The broiler unit went out several months ago and now the oven unit won't heat up to full temperature, We tried replacing thermostat but that didn't fix problem. Sincerely, Kwame Diehl?

Last Answer : Check the oven elements.

Description : Total number of muscles present in our body is – (1) 565 (2) 656 (3) 665 (4) 556

Last Answer : (2) 656 Explanation: The number of muscles in the human body varies from about 656 to 850 (sometimes from 639 to around 800). An exact number is difficult to define. The difficulty lies ... the muscles differently and partly in that some muscles, such as palmaris longus, are not always present.

Description : What is an example of a MAC address? A. Az32:6362:2434 B. BA:281x:8288 C. 101:354:665:8734:ffd6:8023 D. A625:cbdf:6525

Last Answer : A625:cbdf:6525

Description : (3333÷30) + (665 ÷ 25) + (3771 ÷ 27) = ? a) 357.637 b) 458.558 c) 229.357 d) 277.367 e) 498.627

Last Answer : (3333÷30) + (665 ÷ 25) + (3771 ÷ 27) = ? Sol: 111.1 + 26.6 + 139.667 = ? ? = 277.367 Answer: d)

Description : (3333÷30) + (665 ÷ 25) + (3771 ÷ 27) = ? a) 357.637 b) 458.558 c) 229.357 d) 277.367 e) 498.627

Last Answer : (3333÷30) + (665 ÷ 25) + (3771 ÷ 27) = ? Sol: 111.1 + 26.6 + 139.667 = ? ? = 277.367 Answer: d)

Description : Total number of muscles present in our body is : (1) 565 (2) 656 (3) 665 (4) 556

Last Answer : 656

Description : Is -0.66 less than or greater than -0.875?

Last Answer : 0.214999999999999

Description : Is 0.66 bigger than 0.5?

Last Answer : Yes.

Description : An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the ... The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Last Answer : d. 0.5305

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

Description : what is the next number in this pattern0.54, 0.6, 0.66, 0.72?

Last Answer : i think it is 0.8 what about you

Description : is 0.66 a rational number?

Last Answer : no

Description : Is 0.66 a decimal that goes on forever?

Last Answer : 0.66 itself doesn't go on forever. If you are trying to expresstwo thirds as a decimal, then it is 0.66 recurring. So that will goon forever.

Description : What is bigger 0.66 or 0.606?

Last Answer : what is bigger 0.66 or 0.606

Description : What is the deviation ratio for an FM-phone signal having a maximum frequency swing of plus or minus 5 kHz and accepting a maximum modulation rate of 3kHz? A. 60 B. 0.16 C. 0.6 D. 1.66

Last Answer : D. 1.66

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Last Answer : B. 0.66

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Last Answer : C. 0.66

Description : What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Last Answer : (D) 0.66

Description : Minimum recommended baffle spacing in a shell and tube heat exchanger is about (where, D = shell diameter). (A) 0.2 D (B) 0.5 D (C) 0.66 D (D) 0.80 D

Last Answer : (A) 0.2 D

Description : Calculate the ratio of sine of incident angle to the sine of reflected angle when the refractive indices of medium 1 and 2 are given as 2.33 and 1.66 respectively. a) 0.71 b) 1.4 c) 2 d) 3.99

Last Answer : a) 0.71

Description : The ratio of average fluid velocity to the maximum velocity in case of laminar flow of a Newtonian fluid in a circular pipe is (A) 0.5 (B) 1 (C) 2 (D) 0.66

Last Answer : (A) 0.5

Description : The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Last Answer : (A) 0.3

Description : The kinetic energy correction factor for velocity distribution of laminar flow is (A) 0.5 (B) 1.66 (C) 1 (D) 2

Last Answer : (B) 1.66

Description : For turbulent flow of Newtonian fluid in a circular cross-section pipe, the ratio of maximum to average fluid velocity is (A) 0.5 (B) 1 (C) 0.66 (D) < 0.5

Last Answer : (B) 1

Description : The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Last Answer : (D) 0.95

Description : In case of steady flow compression polytropic process (PVn = constant), the work done on air is the lowest, when (A) n = y = 1.4 (B) n = 0 (C) n = 1 (D) n = 1.66

Last Answer : (C) n = 1

Description : The value of Cp & Cv respectively for monatomic gases in Kcal/kg Mole.°K are (A) 5 & 3 (B) 3.987 & 1.987 (C) 1.987 & 0.66 (D) 0.66 & 1.987

Last Answer : A) 5 & 3

Description : In case of a reversible process (following pvn = constant), work obtained for trebling the volume (v1 = 1 m3 and v23 m3) is maximum, when the value of 'n' is (A) 0 (B) 1 (C) y = 1.44 (D) 1.66

Last Answer : (A) 0

Description : The change in base current will be A) 0.66 micro ampere B) 6.6 micro amperes C) 66 micro amperes D) 660 micro amperes.

Last Answer : A) 0.66 micro ampere

Description : What is the shear stress acting along the neutral axis, over a triangular section? a. 2.66 (S/bh) b. 1.5 (S/bh) c. 0.375 (S/bh) d. None of the above

Last Answer : a. 2.66 (S/bh)

Description : How many units of electricity per hp per hour is used by electric motor: A)0.44 b)0.66 C)0.88 d)1.10

Last Answer : C)0.88 d

Description : An image is 1024∗800 pixels with 3 bytes/pixel. Assume the image is uncompressed. How long does it take to transmit it over a 10-Mbps Ethernet ? (A) 196.6 seconds (B) 19.66 seconds (C) 1.966 seconds (D) 0.1966 seconds

Last Answer : (C) 1.966 seconds

Description : Percentage of lead in lead pencils is (1) 0 (2) 31-66 (3) 40 (4) 80

Last Answer :  0