How many feet is 50mm?

How many feet is 50mm?
by

1 Answer

Answer :

1 ft = 304.8 mm (exactly)50 mm = 50 ÷ 304.8 ft= 125/762 ft≈ 0.164 ft
by

Related questions

How many feet is 50mm?

Description : How many feet is 50mm?

Last Answer : 1 ft = 304.8 mm (exactly)50 mm = 50 ÷ 304.8 ft= 125/762 ft≈ 0.164 ft

Nikon Photographers: Can you please recommend me a cheap 50mm lens for a D40?

Description : Nikon Photographers: Can you please recommend me a cheap 50mm lens for a D40?

Last Answer : answer:Great site for exactly what you are looking for. http://lenshero.com/

Photographers: Can you tell me what difference between a 50mm 1.8 and 50mm 2.5 lens for Canon?

Description : Photographers: Can you tell me what difference between a 50mm 1.8 and 50mm 2.5 lens for Canon?

Last Answer : answer:The f1.8 lens (assuming this is a fixed aperture, and not adjustable to different f-stops) will be suitable for work in low-light conditions, since its opening to permit light is larger than an f-2 ... like to do, the higher f-stop lens will give you a deeper depth of field, if only slightly.

What length of an alloy wire of resistivity 5.0x10^-7 Ωm and diameter 0.50mm is required to make a standard 6.0Ω resistor?

Description : What length of an alloy wire of resistivity 5.0x10^-7 Ωm and diameter 0.50mm is required to make a standard 6.0Ω resistor?

Last Answer : Interesting homework question. I’m not knowledgeable about physics, but putting myself in the shoes of someone who is.. Why don’t you post the answer that you got, and show your work, and ask us where you went wrong on the problem.

I'm looking for a refurbished Canon EF 50mm f/1.4 USM Lens in Canada. Where can I get one?

Description : I'm looking for a refurbished Canon EF 50mm f/1.4 USM Lens in Canada. Where can I get one?

Last Answer : Ebay or BestBuy.

How much does a 50mm nail weigh in grams?

Description : How much does a 50mm nail weigh in grams?

Last Answer : Need answer

Label size of foreign article is min & postage paid words should not be less than a) 70mm X 100mm & 300sq mm b) 50mm X 80mm & 200sq mmc) 25mm X 50 mm & 100 sq mm d) None of these

Description : Label size of foreign article is min & postage paid words should not be less than a) 70mm X 100mm & 300sq mm b) 50mm X 80mm & 200sq mm c) 25mm X 50 mm & 100 sq mm d) None of these

Last Answer : a) 70mm X 100mm & 300sq mm

For high degree of workability, the slump value should vary between (a) 0 to 25mm (b) 25 to 50mm (c) 50 to 80mm (d) 80 to 100mm

Description : For high degree of workability, the slump value should vary between (a) 0 to 25mm (b) 25 to 50mm (c) 50 to 80mm (d) 80 to 100mm

Last Answer : (d) 80 to 100mm

For dam construction the size of aggregates are (a) 40mm (b) 50mm (c) 60mm (d) 75mm

Description : For dam construction the size of aggregates are (a) 40mm (b) 50mm (c) 60mm (d) 75mm

Last Answer : (a) 40mm

The length of the vicat plunger is (a) 40mm (b) 60mm (c) 50mm (d) 30mm

Description : The length of the vicat plunger is (a) 40mm (b) 60mm (c) 50mm (d) 30mm

Last Answer : (c) 50mm

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Description : Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Last Answer : d) 32mm diameter

In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge length was 65mm, what is the elongation percentage? a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36

Description : In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge length was 65mm, what is the elongation percentage? a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36

Last Answer : c) % A is 30

The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Description : The gap between scaffold planks (boards) must be no more than? a. 150mm (6 inches) b. 50mm (2 inches) c. 75mm (3 inches) d. 25mm (1 inch)

Last Answer : d. 25mm (1 inch)

.The undercut for Cobalt Chrome’s retentive arm clasp is, A. 0.75mm B. 0.50mm C. 0.25mm

Description : .The undercut for Cobalt Chrome’s retentive arm clasp is, A. 0.75mm B. 0.50mm C. 0.25mm

Last Answer : C. 0.25mm

Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Last Answer : a) 7

Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Description : Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Last Answer : Different recording techniques used in method study: Process charts are used to record the data systematically so that none of the information needed for study and analysis is missed. A. Chart indicating ... area. However, there is no indication of the direction or speed of motion.