In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge length was 65mm, what is the elongation percentage? a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36

In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge  length was 65mm, what is the elongation percentage?  
a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36
by

1 Answer

Answer :

c) % A is 30
by

Related questions

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

In the encoded file, which symbol is marked in the ending ? a) ^ b) & c) $ d) %

Description : In the encoded file, which symbol is marked in the ending ? a) ^ b) & c) $ d) %

Last Answer : c) $

In the encoded file, which symbol is marked in the beginning ? a) ^ b) & c) $ d) %

Description : In the encoded file, which symbol is marked in the beginning ? a) ^ b) & c) $ d) %

Last Answer : a) ^

Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Last Answer : A) 60-70% Cu and 30-40% Zn

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Description : Root and face bends from an 8mm thick butt weld require testing. The specimens are cut to 20mm wide. The code calls for a 4t bend. Which of the following rollers should be selected for the testing? a) 50mm radius b) 50mdiameter c) 32mm radius d) 32mm diameter

Last Answer : d) 32mm diameter

Which best describes Lossless Compression? A. No information is lost but file size is increased B. There is no loss in information at all after compression C. Files which have the exact same data after compression D. Compression that involves an algorithm

Description : Which best describes Lossless Compression? A. No information is lost but file size is increased B. There is no loss in information at all after compression C. Files which have the exact same data after compression D. Compression that involves an algorithm

Last Answer : B. There is no loss in information at all after compression

Data compression which guarantees that all original data can be restored exactly A. Lossless compression B. Lossy compression C. File compression D. Raster compression

Description : Data compression which guarantees that all original data can be restored exactly A. Lossless compression B. Lossy compression C. File compression D. Raster compression

Last Answer : B. Lossy compression

Which of the following is a benefit of lossy compression over lossless? A. File sizes will always be reduced, even when compressed multiple times. B. File quality is not harmed, e.g. images will look exactly the same. C. Files can be decompressed back to their original uncompressed form. D. File sizes are usually significantly smaller.

Description : Which of the following is a benefit of lossy compression over lossless? A. File sizes will always be reduced, even when compressed multiple times. B. File quality is not harmed, e.g. ... can be decompressed back to their original uncompressed form. D. File sizes are usually significantly smaller.

Last Answer : C. Files can be decompressed back to their original uncompressed form.

Which of the following is a true statement about data compression? A. Data compression techniques can be used to reduce the size of a file for storage or transmission. B. Data compression techniques can only be used for certain types of data. C. Data compression techniques cannot be applied to files being transmitted over the Internet. D. Lossy data compression should be used if there may be a need to recover all of the original data from the compressed file.

Description : Which of the following is a true statement about data compression? A. Data compression techniques can be used to reduce the size of a file for storage or transmission. B. Data compression techniques can ... used if there may be a need to recover all of the original data from the compressed file.

Last Answer : A. Data compression techniques can be used to reduce the size of a file for storage or transmission.

In the encoded file, by using which process it can be transformed into original file at any time ? a) Straight b) Reverse c) Transfer d) Compressed

Description : In the encoded file, by using which process it can be transformed into original file at any time ? a) Straight b) Reverse c) Transfer d) Compressed

Last Answer : b) Reverse

What is the reason that in the beginning of encoded file there is data telling which digit/letter represents which word ? a) It is needed to convert the file in compression form b) it is needed to convert the file in encoded form c) it is needed to convert the file in its original uncompressed form d) it is needed to convert the file in graphical form

Description : What is the reason that in the beginning of encoded file there is data telling which digit/letter represents which word ? a) It is needed to convert the file in compression form b) it is ... convert the file in its original uncompressed form d) it is needed to convert the file in graphical form

Last Answer : c) it is needed to convert the file in its original uncompressed form

The difference between the original and reconstructed data, which we will refer to as the ______in the reconstructed data. a. Redundancy b. Compression c. loss d. Distortion

Description : The difference between the original and reconstructed data, which we will refer to as the ______in the reconstructed data. a. Redundancy b. Compression c. loss d. Distortion

Last Answer : d. Distortion

The reconstruction of a ________constructed sequence is identical to the original sequence. a. losslessly b. lossy c. Predictive d. None of the above

Description : The reconstruction of a ________constructed sequence is identical to the original sequence. a. losslessly b. lossy c. Predictive d. None of the above

Last Answer : a. losslessly

In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Last Answer : (A) Percentage elongation

The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Description : The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Last Answer : B

Wohler test is a destructive test to find out the __________ strength of a prepared metal specimen. (A) Creep (B) Fatigue (C) Endurance (D) Tensile

Description : Wohler test is a destructive test to find out the __________ strength of a prepared metal specimen. (A) Creep (B) Fatigue (C) Endurance (D) Tensile

Last Answer : (B) Fatigue

In a cross joint tensile test the following observations were made: Specimen width 20mm, Material thickness 20mm, Max Load: 180kN, Break position: Parent Plate. What is the UTS? a) 45 kN/mm b) 450 N/mm2c) 39 kN/mm2d) 39 N/mm2

Description : In a cross joint tensile test the following observations were made: Specimen width 20mm, Material thickness 20mm, Max Load: 180kN, Break position: Parent Plate. What is the UTS? a) 45 kN/mm b) 450 N/mm2c) 39 kN/mm2d) 39 N/mm2

Last Answer : b) 450 N/mm2

In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2

Description : In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2

Last Answer : b) 333N/mm2

The value of Poison’s ratio depends upon (a) Nature of load, tensile or compressive (b) Magnitude of load (c) Material of the test specimen (d) Dimensions of the test specimen

Description : The value of Poison’s ratio depends upon (a) Nature of load, tensile or compressive (b) Magnitude of load (c) Material of the test specimen (d) Dimensions of the test specimen

Last Answer : (c) Material of the test specimen

Which formula shows how to work out the percentage a file has been compressed by? A. bits in (Huffman *7) /100 B. bits in ASCii - bits in Huffman C. difference in bits / bits in ASCII * 100

Description : Which formula shows how to work out the percentage a file has been compressed by? A. bits in (Huffman *7) /100 B. bits in ASCii - bits in Huffman C. difference in bits / bits in ASCII * 100

Last Answer : C. difference in bits / bits in ASCII * 100

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Description : The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Last Answer : (B) 102 kg

What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Description : What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Last Answer : ANSWER: Y -- YIELD STRENGTH

When is Run Length Encoding used? A. When we want to compress patterns of data B. When we want to decompress patterns of data C. When we want to encode running videos

Description : When is Run Length Encoding used? A. When we want to compress patterns of data B. When we want to decompress patterns of data C. When we want to encode running videos

Last Answer : A. When we want to compress patterns of data

When is Run Length Encoding used? A. When we want to compress patterns of data B. When we want to decompress patterns of data C. When we want to encode running videos

Description : When is Run Length Encoding used? A. When we want to compress patterns of data B. When we want to decompress patterns of data C. When we want to encode running videos

Last Answer : A. When we want to compress patterns of data

A Huffman encoder takes a set of characters with fixed length and produces a set of characters of A. fixed length B. constant length C. random length D. variable length

Description : A Huffman encoder takes a set of characters with fixed length and produces a set of characters of A. fixed length B. constant length C. random length D. variable length

Last Answer : D. variable length

ASCII Code is a example of a. Prefix code b. Variable length code c. Fixed length code d. Alphanumeric code

Description : ASCII Code is a example of a. Prefix code b. Variable length code c. Fixed length code d. Alphanumeric code

Last Answer : c. Fixed length code

Run length encoding is a compression method in which repeated ______ of a symbol are replaced. a. Residual b. Occurrence c. Letters d. None

Description : Run length encoding is a compression method in which repeated ______ of a symbol are replaced. a. Residual b. Occurrence c. Letters d. None

Last Answer : b. Occurrence

An ________is encoded and the algorithm attempts to use the next smaller context. a. One length context b. Zero context c. Escape symbol d. None

Description : An ________is encoded and the algorithm attempts to use the next smaller context. a. One length context b. Zero context c. Escape symbol d. None

Last Answer : c. Escape symbol

The distance of the pointer from the look-ahead buffer is called : a. Length b. Offset c. Triplet d. Code

Description : The distance of the pointer from the look-ahead buffer is called : a. Length b. Offset c. Triplet d. Code

Last Answer : b. Offset

Average length of Extended Huffman code is upper bounded by : a. R b. R+1 c. R-1 d. R+1/n

Description : Average length of Extended Huffman code is upper bounded by : a. R b. R+1 c. R-1 d. R+1/n

Last Answer : d. R+1/n

The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Description : The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Last Answer : (B) 40

Calculate the entropy for : P(A) = 0.4, P(B) = 0.2, P(C) = 0.2, P(D) = 0.1,P(E) =0.1 a. 1.24 b. 1.22 c. 1.28 d. 1.30

Description : Calculate the entropy for : P(A) = 0.4, P(B) = 0.2, P(C) = 0.2, P(D) = 0.1,P(E) =0.1 a. 1.24 b. 1.22 c. 1.28 d. 1.30

Last Answer : b. 1.22

In a transverse WELD tensile test, if the break was in the weld metal, the sample would he: a) Rejected b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate c) Retested d) Acceptable if the UTS is between 80 - 90% of the specified UTS of the plate

Description : In a transverse WELD tensile test, if the break was in the weld metal, the sample would he: a) Rejected b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate c) Retested d) Acceptable if the UTS is between 80 - 90% of the specified UTS of the plate

Last Answer : b) Acceptable if the UTS is equal to or greater than the specified UTS of the plate

Mechanical and Electrical sources increased from - A) 40 to 83 % C) 30 to 93 % B) 35 to 87 % D) None of the above

Description : Mechanical and Electrical sources increased from - A) 40 to 83 % C) 30 to 93 % B) 35 to 87 % D) None of the above

Last Answer : 40 to 83 %

The ratio between the number of boys and girls in a school is 4:5. If the number of boys are increased by 30 % and the number of girls increased by 40 %, then what will the new ratio of boys and girls in the school. A) 13/35 B) 26/35 C) 26/41 D) 23/13 E) None of these

Description : The ratio between the number of boys and girls in a school is 4:5. If the number of boys are increased by 30 % and the number of girls increased by 40 %, then what will the new ratio of boys and girls in the school. A) 13/35 B) 26/35 C) 26/41 D) 23/13 E) None of these

Last Answer : Answer: B boys = 4x and girls = 5x. Required ratio = [(130/100)*4x]/ [(140/100)*5x] 26/35

The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

The total domestic consumption in a city water supply, is assumed (A) 20 % (B) 30 % (C) 40 % (D) 60 %

Description : The total domestic consumption in a city water supply, is assumed (A) 20 % (B) 30 % (C) 40 % (D) 60 %

Last Answer : (D) 60 %

If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Description : If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Last Answer : Answer: Option C

Which of the following is prone to cup and cone fracture? (A) Cast iron (B) Soft brass (C) Round specimen of ductile metal (D) Flat tensile specimen of ductile metal

Description : Which of the following is prone to cup and cone fracture? (A) Cast iron (B) Soft brass (C) Round specimen of ductile metal (D) Flat tensile specimen of ductile metal

Last Answer : Option C

The length of a wire is increased by 1 mm on the application of a certain load. In a wire of the same material but of twice the length and half the radius, the same force will produce an elongation of (a) 0.5 mm (b) 2 mm (c) 4 mm (d) 8 mm

Description : The length of a wire is increased by 1 mm on the application of a certain load. In a wire of the same material but of twice the length and half the radius, the same force will produce an elongation of (a) 0.5 mm (b) 2 mm (c) 4 mm (d) 8 mm

Last Answer : (d) 8 mm

On Indian Railways standard length of rails for Meter Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Description : On Indian Railways standard length of rails for Meter Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Last Answer : C [39 ft (11.89 m)]

On Indian Railways standard length of rails for Broad Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Description : On Indian Railways standard length of rails for Broad Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Last Answer : D [42 ft (12.8 m)] Explanation: Indian Railways is divided into 18 zones. Recently added South Coast Railway zones in Indian Railway (2019).

Students of two university appeared for a common test of maximum 60 marks. The average of their marks for university 1 & university 2 are 39 & 42 respectively. If the no of students of university 1 is twice the no of students of university 2. Then what is the average marks of all students of both the university? A) 40 B) 42 C) 26 D) 36

Description : Students of two university appeared for a common test of maximum 60 marks. The average of their marks for university 1 & university 2 are 39 & 42 respectively. If the no of students of university 1 is twice the no ... the average marks of all students of both the university? A) 40 B) 42 C) 26 D) 36

Last Answer : Answer: A) Let number of students of university2 be N and the no of students of university 1 be 2N the average of university1 and university 2 is 39 and 42 total marks of university 1 students and university 2 ... 78N and N*42 =42N average of both university,  =(78N+42N) /(N+2N) = 40 marks