Description : What fraction 0.0179 inches thick?
Last Answer : There can be no answer. 0.0179 inches can be expressed as afraction only in the context of another quantity of volume.
Description : A bus bar is 3 inches wide and 0.375 inches thick. What size of round conductor (in circular mils) is necessary to carry the same current as the bus bar? A. 1,125,000 circular mils B. 1,250,000 circular mils C. 1,432,000 circular mils D. 1,547,000 circular mils
Last Answer : Answer: C
Description : How thick is 002 inches?
Last Answer : 1 / 2 = 0.50.5 / 2 = 0.25 etc.1 = 10.5 = 1/20.25 = 1/40.125 = 1/80.0625 = 1/160.03125 = 1/320.0156 = 1/640.0078 = 1/1280.0039 = 1/2560.00195 = 1/5120.002 = 1/500
Description : How thick is 6 millimeters in inches thick?
Last Answer : 6 mm is equal to 0.23622047 of an inch.
Description : Carlos is 63 inches tall. What is his height in feet Use a fraction?
Last Answer : 10,000 m
Description : What is fraction equivalent of .36 inches?
Last Answer : There can be no answer. 0.36 inches can be expressed in someother fractional form only in the context of some other measure oflength.
Description : What would be the fraction of 1.9 inches?
Last Answer : There can be no answer. 1.9 oz can be expressed as a fractiononly in the context of another quantity of length.
Description : What is the equivalent fraction for .625 inches?
Last Answer : 0.625/1 = 625/1,000 = 25/40 = 5/8
Description : What is 5.8 inches as a fraction?
Last Answer : 58/10
Description : How many coins 0.75 cm in diameter and 1/8 cm thick must be malted down to form a rectangular solid whose edges are 5 cm. 4 cm and 3 cm? a.584 b.1087 c.0.00001745 sec-1 d.1234 e.2174
Last Answer : b. 1087
Description : A hemispherical bowl is made of steel, 0.25 cm thick. The inner radius of the bowl is 5cm. Find the outer curved surface of the bowl. -Maths 9th
Last Answer : Inner radius of hemispherical bowl = 5cm Thickness of the bowl = 0.25 cm Outer radius of hemispherical bowl = (5+0.25) cm = 5.25 cm Formula for outer CSA of hemispherical bowl = 2πr2, where r is radius of ... 22/7) (5.25)2 = 173.25 Therefore, the outer curved surface area of the bowl is 173.25 cm2.
Description : A hemispherical bowl is made of steel 0.25 cm thick. -Maths 9th
Last Answer : Outer radius of hemispherical bowl = R = r + 0.25 = 5 + 0.25 = 5.25 cm Outer curved surface area of bowl = 2 πR2 = 2 x 22/7 x (5.25)2 = 2 x 22 x 5.25 x 0.75 = 173.25 cm2
Description : A hemispherical bowl is made of steel 0.5 cm thick. The inside radius of the bowl is 4 cm. What is the volume of steel used in making the bowl ? -Maths 9th
Last Answer : answer:
Description : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F
Last Answer : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its ... from the surface of the wire before it turns back.
Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175
Last Answer : (A) 165.4
Description : A major breakthrough in the studies of cells came with the development of electron microscope. This is because (a) the electron microscope is more powerful than the light microscope as it ... (d) electron beam can pass through thick materials, whereas light microscopy requires thin sections.
Last Answer : (b) the resolving power of the electron microscope is much higher than that of the light microscope
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m
Last Answer : (C) 0.274 m3
Description : On inspecting a completed weld which has charpy impact requirements some small, smooth, shallow areas of undercut have been found
Last Answer : d) Only allow the welder to cosmetically blend out the undercut
Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm
Last Answer : d) 2.0 kJ/mm
Description : A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement
Last Answer : B. Take a new impression and make new crown
Description : A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be a) 0.5 kg/cm2 b) 1.5 kg/cm2 c) 4.5 kg/cm2 d) 5.7 kg/cm2
Last Answer : b) 1.5 kg/cm2
Description : The laminations of the armature of a D.C. machine are usually _____ thick. (a) 0.1 to 0.2 mm (b) 0.2 to 0.3 mm (c) 0.3 to 0.4 mm (d) 0.4 to 0.5 mm
Last Answer : (d) 0.4 to 0.5 mm