What is the Speed of moon in rotation?

What is the Speed of moon in rotation?
by

1 Answer

Answer :

According to Wikipedia,"On average, the distance to the Moon is about 385,000 km (239,000 mi) from Earth's center, which corresponds to about 60 Earth radii. With a mean orbital velocity of 1.022 km/s (2,290 mph), the Moon covers a distance approximately its diameter, or about half a degree on the celestial sphere, each hour."- https://en.wikipedia.org/wiki/Orbit_of_the_Moon
by

Related questions

We always see the same lace of the moon, because – (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution around the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Description : We always see the same lace of the moon, because - (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution ... the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Last Answer : (3) It takes equal time for revolution around the earth and rotation on its own axis Explanation: It is tidal locking that causes the synchronous rotation which causes the Moon to present "just one side ... to revolve (orbit) around the Earth. So it maintains a "constant face" in our direction.

We always see the same lace of the moon, because – (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution around the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Description : We always see the same lace of the moon, because - (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution ... the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Last Answer : (3) It takes equal time for revolution around the earth and rotation on its own axis Explanation: It is tidal locking that causes the synchronous rotation which causes the Moon to present "just one side ... to revolve (orbit) around the Earth. So it maintains a "constant face" in our direction.

The phases of the moon are partially the result of the------? A. Changes in the shape of the moon B. Revolution of the moon around the earth (Answer) C. Variations in the moon’s gravitation D. Variations in the speed of rotation of the moon

Description : The phases of the moon are partially the result of the------? A. Changes in the shape of the moon B. Revolution of the moon around the earth (Answer) C. Variations in the moon’s gravitation D. Variations in the speed of rotation of the moon

Last Answer : B. Revolution of the moon around the earth (Answer)

We always see the same face of the moon, because (1) it is smaller than the earth (2) it revolves on its axis in a direction opposite to that of the earth (3) it takes equal time for revolution around the earth and rotation on its own axis (4) it rotates at the same speed as the earth around the sun

Description : We always see the same face of the moon, because (1) it is smaller than the earth (2) it revolves on its axis in a direction opposite to that of the earth (3) it takes equal time for revolution around the earth and rotation on its own axis (4) it rotates at the same speed as the earth around the sun

Last Answer : it takes equal time for revolution around the earth and rotation on its own axis

Rotation of the Moon?

Description : Rotation of the Moon?

Last Answer : Tidal locking. See here on Wikipedia: http://en.wikipedia.org/wiki/Tidal_lock

The moon is showing its same face to the earth because – (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Description : The moon is showing its same face to the earth because – (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Last Answer : (3) Its periods of rotation and revolution are the same Explanation: Because it is "tidally-locked" to the Earth. The Earth's gravity slows down the moon's rotation, so that it rotates at the same ... who walks around a center pole, but shifts their body so they are always facing it as they walk.

Which of these events gives us evidence that the earth is spherical? w) a volcanic eruption x) an earthquake y) an eclipse of the moon z) the earth's rotation

Description : Which of these events gives us evidence that the earth is spherical? w) a volcanic eruption x) an earthquake y) an eclipse of the moon z) the earth's rotation

Last Answer : ANSWER: Y -- AN ECLIPSE OF THE MOON

The moon is showing its same face to the earth because (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Description : The moon is showing its same face to the earth because (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Last Answer : Its periods of rotation and revolution are the same

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand

A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 dynes c.moves towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Description : A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 ... towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Last Answer : a. extends his arms outwards

In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Description : In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Last Answer : c. Depends on speed ratio

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

Where is the speed of rotation of the earth highest? -Do You Know?

Description : Where is the speed of rotation of the earth highest? -Do You Know?

Last Answer : answer:

Explain the difference between rotation , motion speed and oscillation speed ?

Description : Explain the difference between rotation , motion speed and oscillation speed ?

Last Answer : If an object rotates around its center point, it is called rotational speed. If the motion of an object is along a straight line, then this motion is called motion motion. If a particle with ... In the case of oscillation motion, the object is reversed during one period and reversed the other half.

What is the speed of rotation ?

Description : What is the speed of rotation ?

Last Answer : The speed of rotation is called the annual speed.

What is the speed of rotation ?

Description : What is the speed of rotation ?

Last Answer : If something is rotating at the same distance from a certain point, then it has rotational speed.

What is the English meaning of rotation speed ?

Description : What is the English meaning of rotation speed ?

Last Answer : rotational speed English circular motion.

What is the speed of rotation ?

Last Answer : The motion that has both rotation and motion is called rotational motion.

What is the speed of rotation ?

Last Answer : Not all the points of a moving object follow the same path.

If the radius of rotation and the mass being kept constant how does centripetal force vary with the speed of rotation body?

Description : If the radius of rotation and the mass being kept constant how does centripetal force vary with the speed of rotation body?

Last Answer : Feel Free to Answer

determine the speed of rotation of a 20 tooth gear when it is driven by a 40 tooth gear and rotating at 10 rpm?

Description : determine the speed of rotation of a 20 tooth gear when it is driven by a 40 tooth gear and rotating at 10 rpm?

Last Answer : i am the one that asked i dont know the answer

The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: c Explanation: The camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection whereas the throttle position sensor, senses the movement of the throttle ... engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

A body weighs slightly more at the poles than at the equator because (a) the earth is flat at the poles. (b) the earth has the maximum speed of rotation at the equator (c) the attractive force at the poles increases due to the ice cap (d) none of these is a complete explanation

Description : A body weighs slightly more at the poles than at the equator because (a) the earth is flat at the poles. (b) the earth has the maximum speed of rotation at the equator (c) the attractive force at the poles increases due to the ice cap (d) none of these is a complete explanation

Last Answer : Ans:(d)

If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Description : If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Last Answer : (1) decreases Explanation: The weight of a body on the earth is the amount of gravitational pull on it exerted by the earth. Similarly there is another force exerted on a body on earth, that ... under the influence of the centrifugal force and the weight of the body will seem to have decreased.

Which statement is true concerning a split-phase induction motor? A. Motor rotation can be reversed without changing the windings or leads. B. Motor speed can be readily adjusted from zero to full speed. C. The motor will run as a generator with the proper wiring. D. Motor rotation can be reversed by reversing the leads on the starting winding.

Description : Which statement is true concerning a split-phase induction motor? A. Motor rotation can be reversed without changing the windings or leads. B. Motor speed can be readily adjusted from zero to full ... proper wiring. D. Motor rotation can be reversed by reversing the leads on the starting winding.

Last Answer : Answer: D

How the speed of rotation of a split phase induction motor is reversed?

Description : How the speed of rotation of a split phase induction motor is reversed?

Last Answer : The terminal connections of the starting windings are reversed with respect to main running windings..

What speed of rotation of the earth?

Description : What speed of rotation of the earth?

Last Answer : 9.72 km/sec.

Where is the speed of rotation of the earth highest?

Description : Where is the speed of rotation of the earth highest?

Last Answer : Along the Equator

Where is the speed of rotation of the earth highest?

Description : Where is the speed of rotation of the earth highest?

Last Answer : Along the Equator

A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is (A) ½w 2 . R 2 . ρL (B) ½w 2 . δ 2 . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Description : A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The ... . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Last Answer : (C) ½w 2 . δρL (2R + δ)

What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Description : What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Last Answer : (D) 0.66

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Description : Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Last Answer : (A) (1/2π). √(g/r)

What is the effect on the magnitude of emf generated in an AC generator if the speed of rotation is increased?

Description : What is the effect on the magnitude of emf generated in an AC generator if the speed of rotation is increased?

Last Answer : The magnitude of emf generated increases.

Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. Proportional to the speed of rotation 4. Independent of the pressure Which of the statements given above are correct? (a) 1, 2, 3 and 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only

Description : Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. ... 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only

Last Answer : (a) 1, 2, 3 and 4

Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the statements given above are correct? (a) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Description : Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the ... ) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Last Answer : (b) Only 1 and 2

The speed at which the shaft runs so that the additional deflection from the axis of rotation of the shaft becomes infinite, is known as _________ * 1 point (A) Whirling speed (B) Rotational speed (C) Stabilizing speed (D) Reciprocating speed

Description : The speed at which the shaft runs so that the additional deflection from the axis of rotation of the shaft becomes infinite, is known as _________ * 1 point (A) Whirling speed (B) Rotational speed (C) Stabilizing speed (D) Reciprocating speed

Last Answer : (A) Whirling speed

The speed at which the shaft runs so that the additional deflection of the shaft from the axis of rotation becomes ___________, is known as critical or whirling speed. (A) zero (B) minimum (C) maximum (D) infinite

Description : The speed at which the shaft runs so that the additional deflection of the shaft from the axis of rotation becomes ___________, is known as critical or whirling speed. (A) zero (B) minimum (C) maximum (D) infinite

Last Answer : (D) infinite

Critical speed is expressed as A rotation of shaft in degrees B rotation of shaft in radians C rotation of shaft in minutes D natural frequency of the shaft

Description : Critical speed is expressed as A rotation of shaft in degrees B rotation of shaft in radians C rotation of shaft in minutes D natural frequency of the shaft

Last Answer : D natural frequency of the shaft

The speed at which the shaft runs so that the additional deflection from the axis of rotation of the shaft becomes infinite, is known as _________ A. Whirling speed B. Rotational speed C. Stabilizing speed D. Reciprocating speed

Description : The speed at which the shaft runs so that the additional deflection from the axis of rotation of the shaft becomes infinite, is known as _________ A. Whirling speed B. Rotational speed C. Stabilizing speed D. Reciprocating speed

Last Answer : A. Whirling speed

In most practical situation the speed of rotation of the shaft is usually A) Much below the critical speed B) Much above the critical speed C) Near about the critical speed D) Having no relationship with critical speed

Description : In most practical situation the speed of rotation of the shaft is usually A) Much below the critical speed B) Much above the critical speed C) Near about the critical speed D) Having no relationship with critical speed

Last Answer : B) Much above the critical speed

The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Description : The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Last Answer : c. mr ω 2

When the speed of rotation of a shaft equals one of the natural frequencies of the shaft, it is called____________speed.

Description : When the speed of rotation of a shaft equals one of the natural frequencies of the shaft, it is called____________speed.

Last Answer : Ans- Critical

Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Description : Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Last Answer : d) natural frequency of the shaft

Critical speed is expressed as ______. A) rotation of the shaft in degrees (B) rotation of the shaft in radians (C) rotation of the shaft in minutes (D) the natural frequency of the shaf

Description : Critical speed is expressed as ______. A) rotation of the shaft in degrees (B) rotation of the shaft in radians (C) rotation of the shaft in minutes (D) the natural frequency of the shaf

Last Answer : (D) the natural frequency of the shaft

Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Description : Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Last Answer : d) natural frequency of the shaft

Capacity of a rotary gear pump can be varied by (A) Changing the speed of rotation (B) Bleeding air into suction (C) Bypassing liquid from the suction or discharge line (D) All (A), (B) and (C)

Description : Capacity of a rotary gear pump can be varied by (A) Changing the speed of rotation (B) Bleeding air into suction (C) Bypassing liquid from the suction or discharge line (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

If the speed of rotation of earth increases, then mass of earth would?

Description : If the speed of rotation of earth increases, then mass of earth would?

Last Answer : Decrease

If speed of rotation of the earth increases, weight of the body will?

Description : If speed of rotation of the earth increases, weight of the body will?

Last Answer : decrease.

In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Description : In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Last Answer :  Size of cups