Is corrosive related to acid or alkalis?

Is corrosive related to acid or alkalis?
by

1 Answer

Answer :

The term "corrosive" can be applied to both acids and alkalis.The terms describes their effect not their composition or mode ofreaction. Also note it is not just acids and alkalis that can becalled corrosive, other chemicals can too.When relating to chemistry, "Corrosive" means capable ofdestroying solid materials, tending to eat away or consume.
by

Related questions

Is corrrosive acid or alkalis?

Description : Is corrrosive acid or alkalis?

Last Answer : Both are corrosive substances.

Dacron (or Treylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Treylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Description : Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Last Answer : (C) Alkalis

Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Description : Dacron (or Terylene) fibres as compared to nylon fibres have (A) Better heat & acid resistant properties (B) Poorer resistance to alkalis (C) Poorer dyeability (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What substance that is not attacked by corrosive acid?

Description : What substance that is not attacked by corrosive acid?

Last Answer : Those metals that are not reactive on the activity series. Someexamples would be platinum, gold, silver and Mercury.

Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Description : Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Hydrochloric acid is __________ corrosive to common metals. (A) Least (B) Not (C) Mildly (D) Highly

Description : Hydrochloric acid is __________ corrosive to common metals. (A) Least (B) Not (C) Mildly (D) Highly

Last Answer : (D) Highly

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

Mastic asphalt is (A) Acid resisting material (B) Non-corrosive material (C) Corrosive material (D) Heating-resisting material

Description : Mastic asphalt is (A) Acid resisting material (B) Non-corrosive material (C) Corrosive material (D) Heating-resisting material

Last Answer : Answer: Option B

Why there is no suitable indicator of mild acids and mild alkalis ?

Description : Why there is no suitable indicator of mild acids and mild alkalis ?

Last Answer : When the mild alkali solution is added to the mild acid solution drop by drop, the pH value of the solution gradually increases. In this case, even if it comes close to the quenching point, no sudden ... is used. So it can be said that there is no suitable indicator of mild acids and mild alkalis.

Why Concentrated Acids and Alkalis Are Dangerous ?

Description : Why Concentrated Acids and Alkalis Are Dangerous ?

Last Answer : Answer : The value of Ph in alkali is less than 3 and the value of Ph in alkali is more than 7 . But the value of Ph for skin is 5.5 - 6.5 . So it is dangerous.

All alkalis are alkalis , but why not all alkalis are alkalis ?

Description : All alkalis are alkalis , but why not all alkalis are alkalis ?

Last Answer : Alkalis are a class of chemical compounds that are capable of absorbing hydrogen ions. Such as metal oxides or hydrochmides are alkalis. The water-soluble alkali, which is made up of hydrochmide ions, ... it is said that all alkalis are alkalis but not all alkalis are alkalis. References Wikipedia.

Alkalis cannot hydrolyse (A) mRNA (B) tRNA (C) rRNA (D) DNA

Description : Alkalis cannot hydrolyse (A) mRNA (B) tRNA (C) rRNA (D) DNA

Last Answer : Answer : D

Unconjugated bilirubin in serum is soluble in (A) Water (B) Alkalis (C) Acids (D) Methanal

Description : Unconjugated bilirubin in serum is soluble in (A) Water (B) Alkalis (C) Acids (D) Methanal

Last Answer : Answer : D

Wrought iron is a suitable material of construction for handling __________ solutions(A) Dilute acidic(B) Concentrated acidic(C) Alkalis & alkaline(D) None of these

Description : Wrought iron is a suitable material of construction for handling __________ solutions (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Last Answer : (C) Alkalis & alkaline

Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Description : Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Last Answer : (C) Alkalis & alkaline

Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be fabricated with some difficulty (C) Corrosion resistant to most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Description : Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be ... most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Last Answer : (D) Light and resists attack by acids

Berl saddle made of carbon cannot be used for (A) Alkalis (B) SO2 (C) H2SO4 (D) Oxidising atmosphere

Description : Berl saddle made of carbon cannot be used for (A) Alkalis (B) SO2 (C) H2SO4 (D) Oxidising atmosphere

Last Answer : (D) Oxidising atmosphere

Which of the following oxide(s) is/are soluble in water to form alkalis? (i) Na2O (ii) SO2 (iii) K2O (iv) NO2 (a) (i) and (iii) (b) (i) only (c) (ii) and (iv) (d) (iii) only

Description : Which of the following oxide(s) is/are soluble in water to form alkalis? (i) Na2O (ii) SO2 (iii) K2O (iv) NO2 (a) (i) and (iii) (b) (i) only (c) (ii) and (iv) (d) (iii) only

Last Answer : Answer: (a)

Which of the following statements is correct? (a) Sporopollenin can be degraded by enzymes. (b) Sporopollenin is made up of inorganic materials. (c) Sporopollenin can withstand high temperatures as well as strong acids and alkalis. (d) Sporopollenin can withstand high temperatures but not strong acids.

Description : Which of the following statements is correct? (a) Sporopollenin can be degraded by enzymes. (b) Sporopollenin is made up of inorganic materials. (c) Sporopollenin can withstand high temperatures ... strong acids and alkalis. (d) Sporopollenin can withstand high temperatures but not strong acids.

Last Answer : (c) Sporopollenin can withstand high temperatures as well as strong acids and alkalis

Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine(C) Alkalis(D) Suspended solids

Description : Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine (C) Alkalis (D) Suspended solids

Last Answer : (A) Phenol and cyanide

The destruction of water-borne pathogens is termed as disinfection of water. Which of the following is a water disinfectant? (A) Chlorine (B) Alkalis (C) Benzene hexachloride (D) Alkyl benzene sulphonate (ABS)

Description : The destruction of water-borne pathogens is termed as disinfection of water. Which of the following is a water disinfectant? (A) Chlorine (B) Alkalis (C) Benzene hexachloride (D) Alkyl benzene sulphonate (ABS)

Last Answer : (A) Chlorine

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Foaming is caused by the formation of ___________ a) Acids b) Alcohols c) Oils and alkalis d) Ketones

Description : Foaming is caused by the formation of ___________ a) Acids b) Alcohols c) Oils and alkalis d) Ketones

Last Answer : c) Oils and alkalis

None Corrosive Juice In the stomach Milk Frozen Obstacles ?

Last Answer : Renin Milk Frozen Obstacles Help By 3

Are acids Usually corrosive react violently with metals taste sour and are found in oranges and tomatoes true or false?

Description : Are acids Usually corrosive react violently with metals taste sour and are found in oranges and tomatoes true or false?

Last Answer : Basically true

Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat energy of gasoline/litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Description : Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat ... /litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Last Answer : Answer: a Explanation: Anti-knock characteristics of alcohol is good.

Which one of the following has most corrosive effect? (1) Air (2) Carbon dioxide (3) Plants (4) Water

Description : Which one of the following has most corrosive effect? (1) Air (2) Carbon dioxide (3) Plants (4) Water

Last Answer : (4) Water Explanation: Common corrosives are either strong acids, strong bases, or concentrated solutions of certain weak acids or weak bases.

Battery charging rooms should be well ventilated because the charging process produces_____________. A. highly poisonous gas B. highly combustible oxygen C. explosive gases D. corrosive gases

Description : Battery charging rooms should be well ventilated because the charging process produces_____________. A. highly poisonous gas B. highly combustible oxygen C. explosive gases D. corrosive gases

Last Answer : Answer: C

Does ITT Enidine Inc. Incorporated manufacture Wire Rope Isolators (WRI) for corrosive environments?

Description : Does ITT Enidine Inc. Incorporated manufacture Wire Rope Isolators (WRI) for corrosive environments?

Last Answer : Yes, The ITT Enidine Inc. Incorporated standard WRI product is made from stainless steel and aluminum. The standard product can be used successfully in most normal indoor environments. Where greater ... , such as exposure to salt water or corrosive chemicals, stainless steel should be considered.

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Which of the following is not used as a filter medium in case of corrosive liquids? (A) Nylon (B) Glass cloth (C) Metal cloth of monel or stainless steel (D) Cotton fabric

Description : Which of the following is not used as a filter medium in case of corrosive liquids? (A) Nylon (B) Glass cloth (C) Metal cloth of monel or stainless steel (D) Cotton fabric

Last Answer : (D) Cotton fabric

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which of the following constituents of cast iron is mainly responsible for imparting it an anti-corrosive property? (A) Silicon (B) Phosphorus (C) Sulphur (D) None of these

Description : Which of the following constituents of cast iron is mainly responsible for imparting it an anti-corrosive property? (A) Silicon (B) Phosphorus (C) Sulphur (D) None of these

Last Answer : (A) Silicon

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Description : The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Last Answer : (A) Pulse column

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Description : Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Last Answer : (A) Large scale evaporation of liquor is needed

Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Description : Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Last Answer : (B) Requirement of heat transfer area is low

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Extreme Pressure (EP) additives cause ______ wear in the bearing parts. (a) abrasive (b) corrosive (c) pitting (d) fatigue

Description : Extreme Pressure (EP) additives cause ______ wear in the bearing parts. (a) abrasive (b) corrosive (c) pitting (d) fatigue

Last Answer : (b) corrosive

Extreme pressure causes ______ wear in the bearing parts. a) Abrasive b) Corrosive c) Pitting d) All of the mentioned

Description : Extreme pressure causes ______ wear in the bearing parts. a) Abrasive b) Corrosive c) Pitting d) All of the mentioned

Last Answer : b) Corrosive

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Description : Agitated film evaporator is suitable for concentrating __________ liquids. (A) Foaming (B) Viscous (C) Very thin (D) Corrosive

Last Answer : (B) Viscous

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'