A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?

A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?
by

1 Answer

Answer :

ANSWER: THE CURRENT IS ZERO
by

Related questions

A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Description : A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Last Answer : ANSWER: 200 COULOMBS

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

When the same dose of a drug is repeated at half life intervals, the steady-state (plateau) plasma drug concentration is reached after: A. 2–3 half lives B. 4–5 half lives C. 6–7 half lives D. 8–10 half lives

Description : When the same dose of a drug is repeated at half life intervals, the steady-state (plateau) plasma drug concentration is reached after: A. 2–3 half lives B. 4–5 half lives C. 6–7 half lives D. 8–10 half lives

Last Answer : B. 4–5 half lives

When the same dose of a drug is repeated at half life intervals, the steady-state (plateau) plasma drug concentration is reached after: A. 2–3 half lives B. 4–5 half lives C. 6–7 half lives D. 8–10 half lives

Description : When the same dose of a drug is repeated at half life intervals, the steady-state (plateau) plasma drug concentration is reached after: A. 2–3 half lives B. 4–5 half lives C. 6–7 half lives D. 8–10 half lives

Last Answer : B. 4–5 half lives

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?

Description : Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?

Last Answer : ANSWER: 250 VOLTS PER METER or 250 NEWTONS PER COULOMB

Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Description : Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Last Answer : (B) Wet-bulb

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

Circuit breakers usually operate under (a) transient state of short-circuit current (b) sub-transient state of short-circuit current (c) steady state of short-circuit current (d) after D.C. component has ceased

Description : Circuit breakers usually operate under (a) transient state of short-circuit current (b) sub-transient state of short-circuit current (c) steady state of short-circuit current (d) after D.C. component has ceased

Last Answer : (a) transient state of short-circuit current

The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option B

The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option D

Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option B

An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Description : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Last Answer : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Description : In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Last Answer : Resultant reactance.

What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Description : What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Last Answer : 144 seconds (t=R x C)

What effect does inductance have (a) on steady direct current and (b) on direct current while it is changing in amplitude?

Description : What effect does inductance have (a) on steady direct current and (b) on direct current while it is changing in amplitude?

Last Answer : a) No effect. (b) Inductance opposes any change in the amplitude of current.

A low voltage source is being used for testing armature coils. A coil short circuit will be indicated by a _______. A. high voltage reading, while the other coil readings will have an equal or lower value B. low or zero voltage reading, while the other coils will have higher readings C. fluctuating voltmeter reading, while the other coil readings are steady D. steady voltmeter reading, while the other coil readings are fluctuating

Description : A low voltage source is being used for testing armature coils. A coil short circuit will be indicated by a _______. A. high voltage reading, while the other coil readings will have an ... the other coil readings are steady D. steady voltmeter reading, while the other coil readings are fluctuating

Last Answer : Answer: B

The charge build up in the capacitor is due to which quantity? a) Conduction current b) Displacement current c) Convection current d) Direct current

Description : The charge build up in the capacitor is due to which quantity? a) Conduction current b) Displacement current c) Convection current d) Direct current

Last Answer : d) Direct current

An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from _____________. A. one line terminal to each coil lead in succession B. one field coil to each adjacent field coil in turn C. any suitable ground to any available line lead D. any field pole to each field coil lead

Description : An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from ... C. any suitable ground to any available line lead D. any field pole to each field coil lead

Last Answer : Answer: A

What should be the type of source of electric current to get electric current of constant magnitude?

Description : What should be the type of source of electric current to get electric current of constant magnitude?

Last Answer : Direct current

A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Description : A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Last Answer : c. Automatically switched to a more appropriate source of hydraulic supply

A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Description : A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Last Answer : c. Automatically switched to a more appropriate source of hydraulic supply

Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at the line terminals (c) Possibility of better protection for the line due to possible use of higher terminal reactants (d) Improvement of power factor at times of moderate and heavy loads (e) Possibility of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Description : Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at ... of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Last Answer : (a) Increase of short-circuit current of the system

Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at the line terminals (c) Possibility of better protection for the line due to possible use of higher terminal reactants (d) Improvement of power factor at times of moderate and heavy loads (e) Possibility of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Description : Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at ... of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Last Answer : (a) Increase of short-circuit current of the system

Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for the system must be on the lowest level where berthing quarters are located. C. Distribution panels must not be provided with a means of locking in order to permit quick activation of the system. D. Each system must have a separate branch circuit.

Description : Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for ... to permit quick activation of the system. D. Each system must have a separate branch circuit.

Last Answer : Answer: D

What power would be consumed in EACH of the branch resistors of the circuit shown in the illustration if the source is 30 volts, the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Description : What power would be consumed in EACH of the branch resistors of the circuit shown in the illustration if the source is 30 volts, the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: B

Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The magnitude and direction of the current in the circuit shown will be

Description : The magnitude and direction of the current in the circuit shown will be

Last Answer : The magnitude and direction of the current in the circuit shown will be A. `(7)/(3)A` from a to e B. `(7)/ ... e C. 1A from b to e D. 1A from a to e

In a Y-connected circuit, the magnitude of each line current is?

Description : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Last Answer : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Magnitude of current at resonance in R-L-C circuit?

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

If a capacitance is charged by a square wave current source, then the voltage across the capacitor will be

Description : If a capacitance is charged by a square wave current source, then the voltage across the capacitor will be (a) Square wave (b) Step function (c) Triangular wave (d) Zero

Last Answer : If a capacitor is charged by a square wave current source, the voltage across the capacitor is : triangular wave

A single phase CSI has capacitor C as the load. For a constant source current, the voltage across the capacitor

Description : A single phase CSI has capacitor C as the load. For a constant source current, the voltage across the capacitor is   (A) square wave (B) triangular wave (C) step function (D) pulsed wave

Last Answer : Step function

Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Description : Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Last Answer : Ans: B

Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Description : Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Last Answer : Answer: C

What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is

Description : What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is approximately equal to the source voltage?

Last Answer : Capacitor always charges up to the voltage of source. When the capacitor is charged to same as source voltage then there is no current flowing through the capacitor. The current through the capacitor is called displacement current. 

When an alternating potential is applied to a capacitor, the current in the circuit will

Description : When an alternating potential is applied to a capacitor, the current in the circuit will  1. lead the applied potential 2. lag the applied potential 3. be in phase with the applied potential 4. none 

Last Answer : When an alternating potential is applied to a capacitor, the current in the circuit will lead the applied potential

The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro's law (2) Rault's law (3) Ohms law (4) Faraday's law

Description : The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro's law (2) Rault's law (3) Ohms law (4) Faraday's law

Last Answer : (3) Ohms law Explanation: According to Ohm's Law, the potential difference (V) between two terminals of a current-carrying conductor is directly proportional to the current (I), flowing through it. -For any Study materialContact WhatsApp: 8337932441 Join Telegram- Click here

For a straight wire, induced current depends uponA. the speed of movement of wire B. the length of wire C. the magnitude of magnetic flux density D. all of above

Description : For a straight wire, induced current depends uponA. the speed of movement of wire B. the length of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

Magnitude of induced e.m.f is proportional to A. rate of change of current B. rate of change of voltage C. rate of change of magnetic flux linkage D. rate of change of resistance

Description : Magnitude of induced e.m.f is proportional to A. rate of change of current B. rate of change of voltage C. rate of change of magnetic flux linkage D. rate of change of resistance

Last Answer : rate of change of magnetic flux linkage

Area under current-time graph represents A. magnitude of charge B. dielectric C. amount of positive charge D. amount of negative charge

Description : Area under current-time graph represents A. magnitude of charge B. dielectric C. amount of positive charge D. amount of negative charge

Last Answer : magnitude of charge

The shape of a magnetic field around a long straight current carrying wire is: w) elliptical. x) square y) varies depending on the magnitude of the current z) circular

Description : The shape of a magnetic field around a long straight current carrying wire is: w) elliptical. x) square y) varies depending on the magnitude of the current z) circular

Last Answer : ANSWER: Z -- CIRCULAR

The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro’s law (2) Rault’s law (3) Ohms law (4) Faraday’s law

Description : The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro’s law (2) Rault’s law (3) Ohms law (4) Faraday’s law

Last Answer : Ohms law

A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do one of the following things. Will it: w) flow in one direction, beginning at a maximum and decreasing rapidly to zero x) oscillate indefinitely y) oscillate but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency

Description : A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do ... but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency  

Last Answer : ANSWER: Y -- OSCILLATE BUT DIMINISH STEADILY TO ZERO

Which is NOT a characteristic of a series circuit? w) The current is the same throughout. x) The total resistance is the sum of the individual resistance. y) The voltage of the source equals the sum of the circuit's individual voltage drops. z) The total resistance is the sum of the reciprocals of the individual resistances.

Description : Which is NOT a characteristic of a series circuit? w) The current is the same throughout. x) The total resistance is the sum of the individual resistance. y) The voltage of the source ... individual voltage drops. z) The total resistance is the sum of the reciprocals of the individual resistances.

Last Answer : ANSWER: Z -- THE TOTAL RESISTANCE IS THE SUM OF THE RECIPROCALS OF THE RECIPROCAL OF THE INDIVIDUAL RESISTANCES.

Bollman extractor (A) Is a static bed leaching equipment (B) Is used for extraction of oil from oilseed (C) Is a centrifugal extractor (D) Employs only counter-current extraction

Description : Bollman extractor (A) Is a static bed leaching equipment (B) Is used for extraction of oil from oilseed (C) Is a centrifugal extractor (D) Employs only counter-current extraction

Last Answer : (B) Is used for extraction of oil from oilseed

When a fluorescent lamp has reached the end of its useful life, it should be replaced immediately, or the resultant flashing may _____________. A. blow the lamp's circuit breaker B. explode, causing glass to fly in all directions C. short circuit the ballast transformer D. damage the starter and the ballast

Description : When a fluorescent lamp has reached the end of its useful life, it should be replaced immediately, or the resultant flashing may _____________. A. blow the lamp's circuit breaker B. explode, ... fly in all directions C. short circuit the ballast transformer D. damage the starter and the ballast

Last Answer : Answer: D

In a parallel circuit the current in each branch of the circuit is determined by?

Description : In a parallel circuit the current in each branch of the circuit is determined by?

Last Answer : Need answer

If one branch of a parallel network is shorted, what portion of circuit current flows through the remaining branches?

Description : If one branch of a parallel network is shorted, what portion of circuit current flows through the remaining branches?

Last Answer : None.