If z is the midpoint of RT what are x RZ and RT?

If z is the midpoint of RT what are x RZ and RT?
by

1 Answer

Answer :

(6x-4)
by

Related questions

If z is the midpoint of RT what are x RZ and RT?

Description : If z is the midpoint of RT what are x RZ and RT?

Last Answer : (6x-4)

A 10 kilogram object falls from a cliff 100 meters high. At the midpoint of its fall its total energy is: w) 2450 Joules x) 4900 Joules y) 10,000 Joules z) 20,000 Joules

Description : A 10 kilogram object falls from a cliff 100 meters high. At the midpoint of its fall its total energy is: w) 2450 Joules x) 4900 Joules y) 10,000 Joules z) 20,000 Joules

Last Answer : ANSWER: Y -- 10,000 JOULES

The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript “c”refers to critical value)  A. z = P / Pc  B. z = pV/ RT  C. z = T /Tc  D. z = RT / pV Hint: for an real gases the compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT

Description : The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript c refers to critical value)  A. ... compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT

Last Answer : z = pV/ RT

The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Last Answer : B8ZS and HDB3

Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Last Answer : AMI

_____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : Differential Manchester

_____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : All the above

How is a binary 1 encoded in RZ line coding?

Description : How is a binary 1 encoded in RZ line coding?

Last Answer : A half-period optical pulse present in the first half of the bit duration.

The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is the midpoint of the line segment `P Q ,` then the locus of

Description : The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is the midpoint of the line segment `P Q ,` then the locus of

Last Answer : The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is ... (pm2sqrt3,pmsqrt1/7)` D. `(pm2sqrt3,pm(4sqrt(3))/4)`

What methods could you use to calculate the x-coordinate of the midpoint of a horizontal segment with the endpoints of (-60) and (60)?

Description : What methods could you use to calculate the x-coordinate of the midpoint of a horizontal segment with the endpoints of (-60) and (60)?

Last Answer : If you mean endpoints of (-6, 0) and (6, 0) then the midpoint isat the origin of (0, 0)

For a fixed beam with midpoint load point moment for x<L/2 is a. P/4(8x-L) b. P/8(4x-L) c. P/8(L-4x) d. P/4(L-4x)

Description : For a fixed beam with midpoint load point moment for x

Last Answer : b. P/8(4x-L)

How do i determine the class limits or class interval when only the midpoint and frequency is given?

Description : How do i determine the class limits or class interval when only the midpoint and frequency is given?

Last Answer : answer:Are the midpoints equally spaces out? You may have to assume they are unless you have more information. If so, say you have midpoints m1, m2, ..., mn The lower class limit for, say, m7 would be (m6 + ... class limit for mn is mn + w/2 These are special cases since there is no m0 or m(n+1).

State and prove-line joining the midpoint of any two sides of a triangle is parallel to throw side and is equal to 1/2 of it -Maths 9th

Description : State and prove-line joining the midpoint of any two sides of a triangle is parallel to throw side and is equal to 1/2 of it -Maths 9th

Last Answer : Here, In △△ ABC, D and E are the midpoints of sides AB and AC respectively. D and E are joined. Given: AD = DB and AE = EC. To Prove: DE ∥∥ BC and DE = 1212 BC. Construction: Extend line segment DE to ... we have DF ∥∥ BC and DF = BC DE ∥∥ BC and DE = 1212BC (DE = EF by construction) Hence proved.

State and prove-line joining the midpoint of any two sides of a triangle is parallel to throw side and is equal to 1/2 of it -Maths 9th

Description : State and prove-line joining the midpoint of any two sides of a triangle is parallel to throw side and is equal to 1/2 of it -Maths 9th

Last Answer : Here, In △△ ABC, D and E are the midpoints of sides AB and AC respectively. D and E are joined. Given: AD = DB and AE = EC. To Prove: DE ∥∥ BC and DE = 1212 BC. Construction: Extend line segment DE to ... we have DF ∥∥ BC and DF = BC DE ∥∥ BC and DE = 1212BC (DE = EF by construction) Hence proved.

if one end point is at (-5,-6) and the midpoint is at (1,1) whats the endpoint?

Description : if one end point is at (-5,-6) and the midpoint is at (1,1) whats the endpoint?

Last Answer : M = ((x1+x2)/2, (y1+y2)/2)(1,1) = ((-5+x)/2, (-6+y)/2)(-5+x))/2 = 1, (-6+y)/2 = 1-5 + x = 2, -6+y = 2x = 7, y = 8The end point is (7,8)

what is the midpoint in a data array ?

Description : what is the midpoint in a data array ?

Last Answer : Median.

What is the midpoint of the reflector surface of a spherical mirror called ?

Description : What is the midpoint of the reflector surface of a spherical mirror called ?

Last Answer : The center point of the reflecting surface of a spherical mirror is called pole.

Would the length from one midpoint to another on a square be the same length as half the length of a side of the same square?

Description : Would the length from one midpoint to another on a square be the same length as half the length of a side of the same square?

Last Answer : I have been watching that your question being left unanswered for quite some time. Though I tried to understand it, wasn't sure how perfect am I. So could you kindly rephrase your question please?

How do you construct the midpoint of a ray?

Description : How do you construct the midpoint of a ray?

Last Answer : You cannot. A ray is infinite in one direction and so themidpoint would be infinitely far in that direction.

How would you calculate the midpoint of the horizontal segment with endpoints at (0 0) and (20 0)?

Description : How would you calculate the midpoint of the horizontal segment with endpoints at (0 0) and (20 0)?

Last Answer : Points: (0, 0) and (20, 0)Midpoint: (10, 0)

How could you find the y-coordinate of the midpoint of a vertical line segment with endpoint at (00) and (015)?

Description : How could you find the y-coordinate of the midpoint of a vertical line segment with endpoint at (00) and (015)?

Last Answer : If you mean endpoints of (0, 0) and (0, 15) then the midpoint isat (0, 7.5)

What is the midpoint of the segment -1 5 and -6 -2?

Description : What is the midpoint of the segment -1 5 and -6 -2?

Last Answer : Points: (-1, 5) and (-6, -2)Midpoint: (-3.5, 1.5)

What is Trapezoid is the segment that connects the midpoint of the legs of the trapezoid?

Description : What is Trapezoid is the segment that connects the midpoint of the legs of the trapezoid?

Last Answer : It is called the median.

What construction will determine a midpoint?

Description : What construction will determine a midpoint?

Last Answer : What is the answer ?

If bc bisects the angle acd then b is the midpoint of ad?

Description : If bc bisects the angle acd then b is the midpoint of ad?

Last Answer : That is not necessarily true.

What is Trapezoid is the segment that connects the midpoint of the legs of the trapezoid?

Description : What is Trapezoid is the segment that connects the midpoint of the legs of the trapezoid?

Last Answer : It is called the median.

What is the midpoint of A (-3, 2) and B (-2, 4)?

Description : What is the midpoint of A (-3, 2) and B (-2, 4)?

Last Answer : (5/2,11/2)

What is the midpoint of 0 and 0.01?

Description : What is the midpoint of 0 and 0.01?

Last Answer : pls help and have a fun time finding it.

How do I find the midpoint of the line segment joining the points (-1,3) and (-9,8)?

Description : How do I find the midpoint of the line segment joining the points (-1,3) and (-9,8)?

Last Answer : 85

What’s s the midpoint of the line segment with endpoints (-5.5, -6.1) and (-0.5, 9.1)?

Description : What’s s the midpoint of the line segment with endpoints (-5.5, -6.1) and (-0.5, 9.1)?

Last Answer : M = (-5.5+-0.5, -6.1+9.1) = -6.0, 3.0

A line segment has an endpoint at (3, 2). If the midpoint of the line segment is (6, -2), what are the coordinates of the point at the other end of the line segment?

Description : A line segment has an endpoint at (3, 2). If the midpoint of the line segment is (6, -2), what are the coordinates of the point at the other end of the line segment?

Last Answer : (9,4)

True or False The intersection of the segment and its bisector is the segment's midpoint.?

Description : True or False The intersection of the segment and its bisector is the segment's midpoint.?

Last Answer : TRUE

True or False The intersection of the segment and its bisector is the segment's midpoint.?

Description : True or False The intersection of the segment and its bisector is the segment's midpoint.?

Last Answer : TRUE

A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 km. determine the optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

Coil of relay is connected to the A. input of op-amp B. output of op-amp C. midpoint of op-amD. anywhere in between input and ouput of op-amp

Description : Coil of relay is connected to the A. input of op-amp B. output of op-amp C. midpoint of op-am D. anywhere in between input and ouput of op-amp

Last Answer : output of op-amp

The midpoint of the line segment joining the points B and D is: (a) (10,11) (b) (11,5) (c) (7/2,11/2) (d) (5,11/2)

Description : The midpoint of the line segment joining the points B and D is: (a) (10,11) (b) (11,5) (c) (7/2,11/2) (d) (5,11/2)

Last Answer : (c) (7/2,11/2)

The endpoint A of a line segment AB is (3 , -1). If midpoint of AB is (5,7) then the coordinates of the point B are: (a) (7,13) (b) (7,15) (c) (4,3) (d) (4,4)

Description : The endpoint A of a line segment AB is (3 , -1). If midpoint of AB is (5,7) then the coordinates of the point B are: (a) (7,13) (b) (7,15) (c) (4,3) (d) (4,4)

Last Answer : (b) (7,15)

The potential due to the dipole on the midpoint of the two charges will be a) 0 b) Unity c) ∞ d) -∞

Description : The potential due to the dipole on the midpoint of the two charges will be a) 0 b) Unity c) ∞ d) -∞

Last Answer : a) 0

For two charges 3C and -3C separated by 1cm and are located at distances 5cm and 7cm respectively from the point P, then the distance between their midpoint and the point P will be a) 5.91 b) 12.6 c) 2 d) 9

Description : For two charges 3C and -3C separated by 1cm and are located at distances 5cm and 7cm respectively from the point P, then the distance between their midpoint and the point P will be a) 5.91 b) 12.6 c) 2 d) 9

Last Answer : a) 5.91

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

For true difference in elevations between two points and , the level must be set up (A) At any point between A and B (B) At the exact midpoint of A and B (C) Near the point A (D) Near the point B

Description : For true difference in elevations between two points and , the level must be set up (A) At any point between A and B (B) At the exact midpoint of A and B (C) Near the point A (D) Near the point B

Last Answer : (B) At the exact midpoint of A and B

A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at (A) Midpoint of the cantilever (B) Fixed point of the cantilever (C) 1/4th length from free end (D) 3/4th length from free end

Description : A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at ... point of the cantilever (C) 1/4th length from free end (D) 3/4th length from free end

Last Answer : (D) 3/4th length from free end

In a three hinged arch, the third hinge is generally kept at (A) Crown of the arch (B) Midpoint of the crown and left support hinge (C) Midpoint of the crown and right support hinge (D) None of these

Description : In a three hinged arch, the third hinge is generally kept at  (A) Crown of the arch  (B) Midpoint of the crown and left support hinge  (C) Midpoint of the crown and right support hinge  (D) None of these 

Last Answer : (A) Crown of the arch

The center of gravity of a uniform lamina lies at (A) The center of heavy portion (B) The bottom surface (C) The midpoint of its axis (D) All of the above

Description : The center of gravity of a uniform lamina lies at (A) The center of heavy portion (B) The bottom surface (C) The midpoint of its axis (D) All of the above

Last Answer : (C) The midpoint of its axis

Metacentre is the point of intersection of (A) Vertical upward force through e.g. of body and center line of body (B) Buoyant force and the center line of body (C) Midpoint between e.g. and center of buoyancy (D) All of the above

Description : Metacentre is the point of intersection of (A) Vertical upward force through e.g. of body and center line of body (B) Buoyant force and the center line of body (C) Midpoint between e.g. and center of buoyancy (D) All of the above

Last Answer : Answer: Option B

For a fixed beam with UDL,maximum bending moment at midpoint is a. wL3/248 b. wL2/248 c. wL2/24 d. wL2/24

Description : For a fixed beam with UDL,maximum bending moment at midpoint is a. wL3/248 b. wL2/248 c. wL2/24 d. wL2/24

Last Answer : c. wL2/24