Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above
Last Answer : Differential Manchester
Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above
Last Answer : synchronization
Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : differential Manchester
Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : both (a) and (b)
Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI
Last Answer : AMI
Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : Manchester
Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester
Last Answer : B8ZS and HDB3
Description : In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?
Last Answer : Binary 0.
Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester
Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above
Last Answer : a. Half the baud rate.
Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester
Last Answer : NRZ-L
Description : Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester
Last Answer : line
Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above
Last Answer : physical
Description : The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above
Last Answer : twice
Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?
Last Answer : Bi-phase level encoding.
Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary
Last Answer : Bipolar
Description : 1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6T C) MLT-3 D) Manchester
Last Answer : 4D-PAM5
Description : 100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester
Last Answer : 8B6T
Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689
Last Answer : c. Last fragment, 2400 and 2759
Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing
Last Answer : multiplexing
Description : The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding
Last Answer : a. base 64 encoding
Description : In the MIME header field, ____describes how the object within the body was encoded in order that it be included in the message using a mail-safe form. a. content-type b. content-transfer-encoding c. content-description d. content-id
Last Answer : b. content-transfer-encoding
Description : In the MIME header field____describes how the object within the body is to be interpreted. a. content-type b. content-transfer-encoding c. content-description d. content-id
Last Answer : a. content-type
Description : The next header t is an _____ field of Authentication Header that identifies the type of what follows. A. 16-bit B. 64-bit C. 8-bit D. 32-bit
Last Answer : C. 8-bit
Description : Glass transition temperature is detected through (A) X-Ray diffractometery (B) Solution calorimetery (C) Differential scanning calorimetery (D) Thermogravimetric analysis
Last Answer : (C) Differential scanning calorimetery
Description : If z is the midpoint of RT what are x RZ and RT?
Last Answer : (6x-4)
Description : How is a binary 1 encoded in RZ line coding?
Last Answer : A half-period optical pulse present in the first half of the bit duration.
Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above
Last Answer : 48-b
Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : DSSS
Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above
Last Answer : asynchronous
Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above
Last Answer : byte
Description : In hexadecimal colon notation, a 128-bit address isdivided into _______ sections, each _____hexadecimal digits in length. A) 8: 2 B) 8: 3 C) 8: 4 D) none of the above
Last Answer : 8: 4
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps
Last Answer : d. 3200 bps
Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts
Last Answer : c. 62 subnets and 1022 hosts.
Description : We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above
Last Answer : C. codewords
Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : ESS-transition
Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : no-transition
Description : In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Description : The ______ scheme uses three levels (+V, 0, and-V) andthree transition rules to move betweenthe levels. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above
Last Answer : MLT-3
Description : State the two kinds of events trigger a state transition.
Last Answer : A segment arrives from the peer. ∙ The local application process invokes an operation on TCP.
Description : In a stick shift car, is it easier on the clutch to pop it and get some jerkiness, or to ride it a bit for a smoother transition?
Last Answer : answer:The clutch is designed to slip, but it's also designed to wear slightly over time. If you ride it too much you can conceivably wear it out in a couple of hours. If you decide to ... get familiar with the car faster and really lessen the chances of causing damage. Good luck with the dispute.
Description : In the _____ method, time isdivided into intervals. In each interval, a reservation frameprecedes the dataframes sent in that interval. A) reservation B) polling C) token passing D) none of the above
Last Answer : reservation
Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec
Last Answer : a. 2 sec
Description : _____ is an example of a differential stain technique. a. Simple staining b. Negative staining c. Contrast staining d. Gram staining
Last Answer : d. Gram staining
Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte
Last Answer : 4 byte
Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits
Last Answer : Eight bits