x

D.C. motor is to drive a load which has certain minimum value for most of the time and some peak value for short duration. We will select the?


265 views

2 Answers

Answer :

D.C. motor is to drive a load which has certain minimum value for most of the time and some peak value for short duration. We will select the series motor.

Like 0 like

Answer :

DC motor  mostly preferred is DC series motor  becaus the load is continuous for a long time
Like 0 like

Please log in or register to answer this question.

Related Questions


D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select the?
Last Answer : D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select the compound motor.

Show More

144 views 1 answer



Why does the speed of a DC shunt motor decrease as the load increases?
Last Answer : Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

Show More

2.7k views 1 answer




Last Answer : If a D.C. shunt motor is working at full load and if shunt field circuit suddenly opens this will make armature to take heavy current, possibly burning it.

Show More

158 views 1 answer



The normal value of the armature resistance of a d.c. motor is?
Last Answer : The normal value of the armature resistance of a d.c. motor is 0.5.

Show More

2.9k views 1 answer



Explain the necessity of starter for D.C. motor. State various types of D.C. motor starter. 
Last Answer : Necessity of Starter for D.C. Motor: Armature current is given by equation Ia = (V−Eb)/Ra i) If the motor is at standstill or rest, back emf Eb is zero (as Eb= ZNP/(60A), at start speed N ... . Types of D.C. motor starters: i) Two point starter ii)Three point starter iii) Four point starter

Show More

325 views 1 answer



State at least one function and the material used for the following parts of DC Motor.
Last Answer : Part Function Material Yoke -Provides mechanical support for poles -Acts as protecting cover for machine -Provides path for magnetic flux Cast Iron OR Cast Steel Field Winding - ... Pole core  Provides mechanical support to field winding. Cast Iron OR Cast Steel

Show More

171 views 1 answer



A d.c. motor can be looked upon as d.c. generator with the power flow?
Last Answer : A d.c. motor can be looked upon as d.c. generator with the power flow reversed.

Show More

3.2k views 1 answer



The Eb/V ratio of a d.c. motor is an indication of its?
Last Answer : The Eb/V ratio of a d.c. motor is an indication of its efficiency.

Show More

745 views 1 answer



The counter e.m.f. of a d.c. motor?
Last Answer : The counter e.m.f. of a d.c. motor helps in energy conversion.

Show More

90 views 1 answer



In a d.c. motor, unidirectional torque is produced with the help of
Last Answer : Commutator provides unidirectional torque and pulsating dc

Show More

352 views 1 answer



In DC motor iron losses are occurred in?
Last Answer : In DC motor iron losses are occurred in the armature.

Show More

139 views 1 answer




Last Answer : Series motor has got maximum self relieving property.

Show More

193 views 1 answer




Last Answer : When the armature of a D.C. motor rotates, e.m.f. induced is back e.m.f.

Show More

205 views 1 answer




Last Answer : Shunt motors,  Series motors, Compound motors

Show More

102 views 1 answer




Last Answer : Torque developed by a D.C. motor depends upon magnetic field, active length of the conductor, current flow through the conductors, number of conductors, radius of armature.

Show More

644 views 1 answer




Last Answer : If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

Show More

205 views 1 answer




Last Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

Show More

355 views 1 answer



A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be
Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

Show More

487 views 1 answer



In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :
Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

Show More

112 views 1 answer



The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α
Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

Show More

151 views 1 answer




Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

Show More

144 views 1 answer




Last Answer : If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

Show More

123 views 1 answer




Last Answer : The speed of a D.C. shunt motor more than its full-load speed can be obtained by decreasing the field current.

Show More

148 views 1 answer



Why dc series motor should not be started at no load?

Show More

631 views 0 answers



DC MOTOR MCQ
Last Answer : 101. Which of the following loss in a D.C. generator is dissipated in the form of heat? (a) Mechanical loss (b) Core loss (c) Copper loss (d) All of the above Ans: d 102. Which of the following ... (b) does not run as a generator (c) also runs as a motor comes to stop after sometime Ans: a

Show More

481 views 3 answers



State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.
Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Show More

387 views 1 answer



DC motor gross torque example
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Show More

145 views 2 answers



DC shunt motor
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Show More

141 views 2 answers



DC motor brake test numerical
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Show More

74 views 2 answers



Brake test on DC series motor
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Show More

302 views 2 answers



If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.
Last Answer : increases

Show More

2.8k views 4 answers



What would happen if a DC motor was supplied with AC ?
Last Answer : With three phase induction motor, humming and not rotate, but if single phase universal motor like air blower, home mixture, motor run on constant speed..speed variation not possible...

Show More

122 views 2 answers



State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator. 
Last Answer : Function : i) Yoke: The yoke serves the following two purposes. i) It supports the other components such as poles and provides mechanical protection for whole machine. ii) It forms a part of ... one pole to another and thus to help the motor to develop a continuous and unidirectional torque  

Show More

576 views 1 answer



State any four applications of DC shunt motor.
Last Answer : Applications of DC shunt motor: 1) Lathe machines 2) drilling machines 3) milling machines 4) Printing machinery 5) Paper industry 6) centrifugal and reciprocating pumps 7) blowers 8)fans

Show More

116 views 2 answers



Describe the reason of using dc series motor for electric trains.
Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

Show More

142 views 1 answer



A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is
Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

Show More

342 views 1 answer



A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor :  (A) can be operated in first quadrant (B) ... in first & second quadrants (C) can be operated in first & fourth quadrants (D) cannot be operated
Last Answer : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor : can be operated in first & fourth quadrants

Show More

232 views 1 answer



The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking
Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

Show More

2.5k views 1 answer



In a DC motor, it is important to place the brushes along ______ A) Magnetic Neutral Axis B) Normal Geometric Axis C) Nominal Geometric Axis D) None of these
Last Answer : In a DC motor, it is important to place the brushes along Magnetic Neutral Axis

Show More

97 views 1 answer



In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)
Last Answer : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

Show More

125 views 1 answer




Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

Show More

99 views 1 answer




Last Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

Show More

168 views 1 answer



The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above
Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Show More

397 views 1 answer




Last Answer : At the instant of starting when a D.C. motor is put on supply, it behaves like a low resistance circuit.

Show More

132 views 1 answer




Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

Show More

231 views 1 answer




Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

Show More

135 views 1 answer



As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?
Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

Show More

189 views 1 answer




Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

Show More

94 views 1 answer




Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

Show More

214 views 1 answer




Last Answer : In a differentially compounded D.C. motor, if shunt field suddenly opens the motor will first stop and then run in opposite direction as series motor.

Show More

94 views 1 answer


Show More⇦ PreviousNext ⇨