How many years are represented between the top layer and the bottom fossils bearing layers?

How many years are represented between the top layer and the bottom fossils bearing layers?
by

1 Answer

Answer :

What is the answer ?
by

Related questions

How do scientist use fossils to determine the relative ages of rock layers?

Description : How do scientist use fossils to determine the relative ages of rock layers?

Last Answer : Fossils are usually found in certain layers of sedimentary rock that allow scientist to date when the animal or plant was originally covered by silt, or other sedimentary rock.

How do scientists most likely use the layers to help them to learn about fossils?

Description : How do scientists most likely use the layers to help them to learn about fossils?

Last Answer : Cause they are helpful

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from (A) Top most pervious layer (B) Central pervious layer (C) Lowest pervious layer (D) All the pervious layer

Description : A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from (A) Top most pervious layer (B) Central pervious layer (C) Lowest pervious layer (D) All the pervious layer

Last Answer : (D) All the pervious layers

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

For different layers of cement concrete floor. Pick up the incorrect statement from the following: (A) The lowest layer consists of consolidated ground (B) A 10 cm thick clean sand is laid on consolidated ground (C) A 10 cm lime concrete (1 : 4 : 8) is laid on clean sand (D) A 10 cm thick cement concrete (1 : 2 : 4) is laid on top layer

Description : For different layers of cement concrete floor. Pick up the incorrect statement from the following: (A) The lowest layer consists of consolidated ground (B) A 10 cm thick clean sand is laid on consolidated ground (C) ... sand (D) A 10 cm thick cement concrete (1 : 2 : 4) is laid on top layer

Last Answer : Option D

What is the bottom layers of sedimentary rock?

Description : What is the bottom layers of sedimentary rock?

Last Answer : The bottom layer of a sedimentary rock is called the basallayer. This layer is considered the coarsest in the rock.

In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left side of the bearing without metal to metal contact (C) The journal sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Description : In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left ... sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Last Answer : (A) The journal climbs to the right side of the bearing without metal to metal contact

What are your top/bottom three songs that you liked 20 years ago, but that you now think are completely laughable?

Description : What are your top/bottom three songs that you liked 20 years ago, but that you now think are completely laughable?

Last Answer : Eat it , like a surgeon, and fat. all from weird Al Yankovic

The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

Description : The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

Last Answer : The adrenal cortex can be divided intro three layers, called____ (inner layer), _____(middle layer) and ______(outer layer)

What term refers to the process in cells differentiate into layers with each layer ultimately forming distinct parts of the fetus?

Description : What term refers to the process in cells differentiate into layers with each layer ultimately forming distinct parts of the fetus?

Last Answer : Gastrulation

Of the three layers of the skin, which is the thick, fat-containing layer? A. dermis B. epidermis C. epithelium D. subcutaneous tissue

Description : Of the three layers of the skin, which is the thick, fat-containing layer? A. dermis B. epidermis C. epithelium D. subcutaneous tissue

Last Answer : Ans: D

The mirage is seen in a hot desert because of (a) The density of the layer of air increases with altitude (b) The density of the layer of air decreases with altitude (c) The reflection of light from the layers of sand (d) The total internal reflection from sand

Description : The mirage is seen in a hot desert because of (a) The density of the layer of air increases with altitude (b) The density of the layer of air decreases with altitude (c) The reflection of light from the layers of sand (d) The total internal reflection from sand

Last Answer : Ans:(a)

Ozone layer is formed due to reactions of : (1) oxygen and ultraviolet rays (2) carbon dioxide and layers of atmosphere (3) cosmic rays and layers of atmosphere (4) infrared rays and ultraviolet rays

Description : Ozone layer is formed due to reactions of : (1) oxygen and ultraviolet rays (2) carbon dioxide and layers of atmosphere (3) cosmic rays and layers of atmosphere (4) infrared rays and ultraviolet rays

Last Answer : (1) oxygen and ultraviolet rays Explanation: Ozone in the Earth's stratosphere is created by ultraviolet light striking ordinary oxygen molecules containing two oxygen atoms (O2), splitting them into ... (atomic oxygen). The atomic oxygen then combines with unbroken O2 to create ozone (O3).

. If Prandtl number is greater than the Schmidt number, then the (A) Thermal boundary layer lies inside the concentration boundary layer (B) Concentration boundary layer lies inside the thermal boundary layer (C) Thermal & concentration boundary layers are of equal thickness (D) Hydrodynamic (i.e., momentum) boundary layer is thicker than the other two

Description : . If Prandtl number is greater than the Schmidt number, then the (A) Thermal boundary layer lies inside the concentration boundary layer (B) Concentration boundary layer lies inside the thermal boundary ... (D) Hydrodynamic (i.e., momentum) boundary layer is thicker than the other two

Last Answer : (A) Thermal boundary layer lies inside the concentration boundary layer

A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (B) 12

The thermal boundary layer at NPr > 1 (A) Is thicker than hydrodynamic boundary layer (B) Is thinner than hydrodynamic boundary layer (C) And the hydrodynamic boundary layers are identical (D) Disappears

Description : The thermal boundary layer at NPr > 1 (A) Is thicker than hydrodynamic boundary layer (B) Is thinner than hydrodynamic boundary layer (C) And the hydrodynamic boundary layers are identical (D) Disappears

Last Answer : (B) Is thinner than hydrodynamic boundary layer

Structures involved in colour vision include: a. parvocellular pathway b. superficial layer 4C of visual cortex c. superior collliculi d. geniculate layers 1-2

Description : Structures involved in colour vision include: a. parvocellular pathway b. superficial layer 4C of visual cortex c. superior collliculi d. geniculate layers 1-2

Last Answer : parvocellular pathway

With regard to the cornea: a. photokeratitis occurs with wavelength of 270nm b. microvilli are found in the outer layer of the epithelium c. the turnover of the corneal epithelium typically takes 30 days d. the corneal epithelium is about 10 layers in thickness

Description : With regard to the cornea: a. photokeratitis occurs with wavelength of 270nm b. microvilli are found in the outer layer of the epithelium c. the turnover of the corneal epithelium typically takes 30 days d. the corneal epithelium is about 10 layers in thickness

Last Answer : photokeratitis occurs with wavelength of 270nm

The figure shows blood circulation in humans with labels A to D. Select the option which gives correct identification of label and functions of the part. (a) B - Capillary-Thin without muscle layer and wall two cell layers thick (b) C - Vein-Thin walled and blood flows in jerks/ spurts (c) D - Pulmonary vein-Takes oxygenated blood to heart, pO2 = 95 mmHg (d) A - Artery-Thick walled and blood flows evenly

Description : The figure shows blood circulation in humans with labels A to D. Select the option which gives correct identification of label and functions of the part. (a) B - Capillary-Thin without muscle layer and ... blood to heart, pO2 = 95 mmHg (d) A - Artery-Thick walled and blood flows evenly

Last Answer : (c) D - Pulmonary vein-Takes oxygenated blood to heart, pO2 = 95 mmHg

Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Last Answer : D) All of the above

TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application

Description : The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application

Last Answer : d.application

The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Description : The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Last Answer : c.application layer

Which of the following layers of the OSI model is responsible for user interaction? a.Layer 4 b.Layer 5 c.Layer 6 d.Layer 7

Description : Which of the following layers of the OSI model is responsible for user interaction? a.Layer 4 b.Layer 5 c.Layer 6 d.Layer 7

Last Answer : d.Layer 7

Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

Which of the following layers of the OSI reference model is concerned with the syntax of data exchanged between application entities? a. Presentation layer b. Application layer c. Transportation layer d. Session layer

Description : Which of the following layers of the OSI reference model is concerned with the syntax of data exchanged between application entities? a. Presentation layer b. Application layer c. Transportation layer d. Session layer

Last Answer : a. Presentation layer

Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

Which layer provides interface between network support layers and user support layers? a. session layer b. data link layer c. transport layer d. network layer

Description : Which layer provides interface between network support layers and user support layers? a. session layer b. data link layer c. transport layer d. network layer

Last Answer : c. transport layer

In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, applicationB. physical, data link, network C. data link, network D. physical, data link

Description : In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, application B. physical, data link, network C. data link, network D. physical, data link

Last Answer : B. physical, data link, network

In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________. A. Added B. Removed C. Rearranged D. Modified

Description : In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________. A. Added B. Removed C. Rearranged D. Modified

Last Answer : A. Added

In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________ a) Added b) Removed c) Rearranged d) Modified

Description : In the layer hierarchy as the data packet moves from the upper to the lower layers, headers are ___________ a) Added b) Removed c) Rearranged d) Modified

Last Answer : a) Added

There are five concentric layers within the atmosphere which is differentiated on the basis of temperature. The atmospheric layer which lies close to the earth's surface in which human being along with other organisms live is called troposphere. The rate at which air temperature in the troposphere gradually decreases with height is about __________ °C/km. (A) 0.05 (B) 1 (C) 6.5 (D) 15

Description : There are five concentric layers within the atmosphere which is differentiated on the basis of temperature. The atmospheric layer which lies close to the earth's surface in which human being along with other organisms live is called ... is about __________ °C/km. (A) 0.05 (B) 1 (C) 6.5 (D) 15

Last Answer : (C) 6.5

Which of the following is correct? a) Layers are not strongly coupled to the layers above them b) Each layer is strongly coupled only to the layer immediately below it c) Overall Layered-style architectures are loosely coupled d) All of the mentioned

Description : Which of the following is correct? a) Layers are not strongly coupled to the layers above them b) Each layer is strongly coupled only to the layer immediately below it c) Overall Layered-style architectures are loosely coupled d) All of the mentioned

Last Answer : All of the mentioned

Which of the following is true with respect to layered architecture? a) Each layer is allowed to depend on the layer above it being present and correct b) A layer may call other layers above and below it, as long as it uses themc) All of the mentioned d) None of the mentioned

Description : Which of the following is true with respect to layered architecture? a) Each layer is allowed to depend on the layer above it being present and correct b) A layer may call other layers above and below it, as long as it uses themc) All of the mentioned d) None of the mentioned

Last Answer : None of the mentioned

What is Relaxed Layered Style? a) Each layer can be constrained to use only the layer directly below it b) Sometimes this constraint is relaxed slightly to allow each layer to use all the layers below it c) All of the mentioned d) None of the mentioned

Description : What is Relaxed Layered Style? a) Each layer can be constrained to use only the layer directly below it b) Sometimes this constraint is relaxed slightly to allow each layer to use all the layers below it c) All of the mentioned d) None of the mentioned

Last Answer : Sometimes this constraint is relaxed slightly to allow each layer to use all the layers below it

Which of the following is incorrect? a) A Layered-style program is divided into an array of modules or layers b) Each layer provides services to the layer “below” and makes use of services provided by the layer “above” c) All of the mentioned d) None of the mentioned

Description : Which of the following is incorrect? a) A Layered-style program is divided into an array of modules or layers b) Each layer provides services to the layer “below” and makes use of services provided by the layer “above” c) All of the mentioned d) None of the mentioned

Last Answer : Each layer provides services to the layer “below” and makes use of services provided by the layer “above”

Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile(B) The layers of the soil parallel to the earth surface are called horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Description : Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile (B) The layers of the soil parallel to the earth ... horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Last Answer : Answer: Option D

Which of the following types of aneurysms results in bleeding into the layers of the arterial wall? a) Dissecting Dissection results from a rupture in the intimal layer, resulting in bleeding between the intimal and medial layers of the arterial wall. b) Saccular Saccular aneurysms collect blood in the weakened outpouching. c) False In a false aneurysm, the mass is actually a pulsating hematoma. d) Anastomotic An anastomotic aneurysm occurs as a result of infection at arterial suture or graft sites.

Description : Which of the following types of aneurysms results in bleeding into the layers of the arterial wall? a) Dissecting Dissection results from a rupture in the intimal layer, resulting in bleeding ... Anastomotic An anastomotic aneurysm occurs as a result of infection at arterial suture or graft sites.

Last Answer : a) Dissecting Dissection results from a rupture in the intimal layer, resulting in bleeding between the intimal and medial layers of the arterial wall.

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

Sapwood consists of (A) Innermost annular rings around the pith (B) Portion of timber between heartwood and cambium layer (C) Thin layers below the bark (D) Thin fibre which extends from the pith outwards and holds the annular rings together

Description : Sapwood consists of (A) Innermost annular rings around the pith (B) Portion of timber between heartwood and cambium layer (C) Thin layers below the bark (D) Thin fibre which extends from the pith outwards and holds the annular rings together

Last Answer : Answer: Option B

What layers are covered under end to end layer connectivity? Explain briefly the function of each one of them.

Description : What layers are covered under end to end layer connectivity? Explain briefly the function of each one of them.

Last Answer : The layers 4-7 of ISO-OSI reference model communicate with peer entities in the end systems. There is no communication with entities in the intermediate systems. In this sense, layers 4-7 are often ... 6. Editors and terminal support services 7. Telematic services like videotext. 

What are the end-to-end layers of OSI structure? Explain the transport layer in detail.

Description : What are the end-to-end layers of OSI structure? Explain the transport layer in detail.

Last Answer : The layers 4-7 of ISO-OSI reference model communicate with peer entities in the end systems. There is no communication with entities in the intermediate systems. In this sense, ... tracking, connection flow control, sequencing of data, error checking, and application addressing and identification.

Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Last Answer : D) All of the above

TCP/IP ................. layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP ................. layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Last Answer : D) All of the above