The thermal boundary layer at NPr > 1 (A) Is thicker than hydrodynamic boundary layer (B) Is thinner than hydrodynamic boundary layer (C) And the hydrodynamic boundary layers are identical (D) Disappears

The thermal boundary layer at NPr > 1
(A) Is thicker than hydrodynamic boundary layer
(B) Is thinner than hydrodynamic boundary layer
(C) And the hydrodynamic boundary layers are identical
(D) Disappears
by

1 Answer

Answer :

(B) Is thinner than hydrodynamic boundary layer
by

Related questions

. If Prandtl number is greater than the Schmidt number, then the (A) Thermal boundary layer lies inside the concentration boundary layer (B) Concentration boundary layer lies inside the thermal boundary layer (C) Thermal & concentration boundary layers are of equal thickness (D) Hydrodynamic (i.e., momentum) boundary layer is thicker than the other two

Description : . If Prandtl number is greater than the Schmidt number, then the (A) Thermal boundary layer lies inside the concentration boundary layer (B) Concentration boundary layer lies inside the thermal boundary ... (D) Hydrodynamic (i.e., momentum) boundary layer is thicker than the other two

Last Answer : (A) Thermal boundary layer lies inside the concentration boundary layer

For flow over a flat plate, the ratio of thermal boundary layer thickness, 'xt' and hydrodynamic boundary layer thickness 'x' is equal to (where, NPr = Prandtl number) (A) NPr (B) NPr 1/3 (C) NPr -1 (D) NPr -1/3

Description : For flow over a flat plate, the ratio of thermal boundary layer thickness, 'xt' and hydrodynamic boundary layer thickness 'x' is equal to (where, NPr = Prandtl number) (A) NPr (B) NPr 1/3 (C) NPr -1 (D) NPr -1/3

Last Answer : (B) NPr 1/3

At what value of Prandtl number, the hydrodynamic and thermal boundary layers of a fluid flowing over a heated plate will be identical? (A) 1 (B) < 1 (C) > 1 (D) None of these

Description : At what value of Prandtl number, the hydrodynamic and thermal boundary layers of a fluid flowing over a heated plate will be identical? (A) 1 (B) < 1 (C) > 1 (D) None of these

Last Answer : (A) 1

The hydrodynamic and thermal boundary layers will merge, when (A) Prandtl number is one (B) Schmidt number tends to infinity (C) Nusselt number tends to infinity (D) Archimedes number is greater than 10000

Description : The hydrodynamic and thermal boundary layers will merge, when (A) Prandtl number is one (B) Schmidt number tends to infinity (C) Nusselt number tends to infinity (D) Archimedes number is greater than 10000

Last Answer : (A) Prandtl number is one

Thickness of thermal boundary layer is more compared to that of hydrodynamic boundary layer, when the value of Prandtl number is (A) 1 (B) < 1 (C) > 1 (D) > 5

Description : Thickness of thermal boundary layer is more compared to that of hydrodynamic boundary layer, when the value of Prandtl number is (A) 1 (B) < 1 (C) > 1 (D) > 5

Last Answer : (B) < 1

The ratio of hydrodynamic boundary layer to thermal boundary layer thickness in case of liquid metals is (A) < 1 (B) 1 (C) > 1 (D) 2

Description : The ratio of hydrodynamic boundary layer to thermal boundary layer thickness in case of liquid metals is (A) < 1 (B) 1 (C) > 1 (D) 2

Last Answer : (A) < 1

How the thickness of thermal boundary layer and thickness of hydrodynamic boundary layer related ?

Description : How the thickness of thermal boundary layer and thickness of hydrodynamic boundary layer related ?

Last Answer : Ratio of their thickness = (Prandtl number)-1/3.

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Description : The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Last Answer : (B) Cavitation

02. The separation of flow occurs when the hydrodynamic boundary layer thickness is reduced to zero. A) AgreeB) Disagree

Description : 02. The separation of flow occurs when the hydrodynamic boundary layer thickness is reduced to zero. A) Agree B) Disagree

Last Answer : A

Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than (A) One diameter of thinner bar (B) One diameter of thicker bar (C) Twice the diameter of thinner bar (D) None of these

Description : Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than (A) One diameter of thinner bar (B) One diameter of thicker bar (C) Twice the diameter of thinner bar (D) None of these

Last Answer : Answer: Option B

If a beam fails in bond, then its bond strength can be increased most economically by (A) Increasing the depth of beam (B) Using thinner bars but more in number (C) Using thicker bars but less in number (D) Providing vertical stirrups

Description : If a beam fails in bond, then its bond strength can be increased most economically by (A) Increasing the depth of beam (B) Using thinner bars but more in number (C) Using thicker bars but less in number (D) Providing vertical stirrups

Last Answer : Answer: Option B

Starting friction is low in case of the __________ lubrication. (A) Boundary (B) Hydrodynamic (C) Hydrostatic (D) Mixed/semi-fluid

Description : Starting friction is low in case of the __________ lubrication. (A) Boundary (B) Hydrodynamic (C) Hydrostatic (D) Mixed/semi-fluid

Last Answer : (C) Hydrostatic

Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air (C) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Description : Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter ... ) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Last Answer : (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air

Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile(B) The layers of the soil parallel to the earth surface are called horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Description : Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile (B) The layers of the soil parallel to the earth ... horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Last Answer : Answer: Option D

The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are same for, NPr = NSc = __________ (A) 1 (B) 0.5 (C) 10 (D) 0

Description : The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are same for, NPr = NSc = __________ (A) 1 (B) 0.5 (C) 10 (D) 0

Last Answer : (A) 1

When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced conduction (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Description : When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced ... (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Last Answer : (C) Mixed convection (both free and forced)

Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced due to density difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Description : Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced ... difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Last Answer : (D) None of these

Boundary lubricated bearing is (A) Thick film bearing (B) Thin film bearing (C) Hydrodynamic bearing (D) Hydrostatic bearing

Description : Boundary lubricated bearing is (A) Thick film bearing (B) Thin film bearing (C) Hydrodynamic bearing (D) Hydrostatic bearing

Last Answer : (B) Thin film bearing

A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature difference across the wall is 36°C. The temperature difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Description : A wall has two layers of materials A and B; each made of a different material. Both the layers have the same thickness. The thermal conductivity of material A is twice that of B. Under the equilibrium, the temperature ... difference across the layer A is __________ °C. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (B) 12

Which of the following is true about cell wall of gram-positive bacteria? A- It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- D.All of these

Description : Which of the following is true about cell wall of gram-positive bacteria? A- It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- D.All of these

Last Answer : D.All of these

Which of the following is true about cell wall of gram-positive bacteria? A-It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- All of these

Description : Which of the following is true about cell wall of gram-positive bacteria? A-It consists of multiple layers B- It is thicker than that associated with gram-negative bacteria C- It contains teichoic acids D- All of these

Last Answer : All of these

Direct conversion of thermal energy to electrical energy is facilitated by the (A) Fuel cells (B) Photo voltaic cell (C) Magneto hydrodynamic generator (D) None of these

Description : Direct conversion of thermal energy to electrical energy is facilitated by the (A) Fuel cells (B) Photo voltaic cell (C) Magneto hydrodynamic generator (D) None of these

Last Answer : (C) Magneto hydrodynamic generator

Air over the oceans is colder in summer and warmer in winter compared with air over the continental regions. This is because (a) Water is translucent and has a relatively high heat capacity compared to dirt (b) Compared to dirt, a thicker layer of water participates in the seasonal cycle (c) The albedo of water is greater than that of land and thus reflects more solar radiation (d) Both A and B are true (e) The effect is due to the changes in circulation between continents and oceans

Description : Air over the oceans is colder in summer and warmer in winter compared with air over the continental regions. This is because (a) Water is translucent and has a relatively high heat capacity compared ... B are true (e) The effect is due to the changes in circulation between continents and oceans

Last Answer : (d) Both A and B are true

Why two thin shirts can keep us warmer than a single thick shirt in winter ? (1) Two thin shirts become thicker so prevent transmission of heat (2) Air layer between two shirts works as good conductor (3) Air layer between two shirts behaves like insulating media (4) No radiation of heat takes place

Description : Why two thin shirts can keep us warmer than a single thick shirt in winter ? (1) Two thin shirts become thicker so prevent transmission of heat (2) Air layer between two shirts works as good conductor (3) Air layer between two shirts behaves like insulating media (4) No radiation of heat takes place

Last Answer : Air layer between two shirts behaves like insulating media

What is Inner thicker layer of skin.?

Description : What is Inner thicker layer of skin.?

Last Answer : The skin is the largest organ of the body, with a surface area of 18 square feet. Its two main layers are the epidermis (outer layer) and dermis (inner layer). And what you ask is DERMIS ( ... layer, is thicker and made of thick collagen fibers that are arranged parallel to the surface of the skin.

A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Description : A _________ interconnects LAN having identical protocols at the physical and data link layers. A. All of these B. bridge C. router D. Gateway

Last Answer : B. bridge

The term critical angle describes ∙ A. the point at which light is refracted ∙ B. the point at which light becomes invisible ∙ C. the point at which light has gone from the refractive mode to the reflective mode ∙ D. the point at which light has crossed the boundary layers from one index to another

Description : The term critical angle describes ∙ A. the point at which light is refracted ∙ B. the point at which light becomes invisible ∙ C. the point at which light has gone from the refractive mode ... reflective mode ∙ D. the point at which light has crossed the boundary layers from one index to another

Last Answer : C. the point at which light has gone from the refractive mode to the reflective mode ∙

The termcritical angle describes a. the point at which light is refracted b. the point at which light becomes invisible c. the point at which light has gone from the refractive mode to the reflective mode d. the point at which light has crossed the boundary layers from one index to another

Description : The termcritical angle describes a. the point at which light is refracted b. the point at which light becomes invisible c. the point at which light has gone from the refractive mode to the reflective mode d. the point at which light has crossed the boundary layers from one index to another

Last Answer : c. the point at which light has gone from the refractive mode to the reflective mode

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

Azeotropism for ethyl alcohol-water system disappears by (A) Increasing temperature (B) Decreasing pressure (C) Increasing pressure (D) No means

Description : Azeotropism for ethyl alcohol-water system disappears by (A) Increasing temperature (B) Decreasing pressure (C) Increasing pressure (D) No means

Last Answer : (B) Decreasing pressure

NSc /NPr is called the (A) Psychrometric ratio (B) Lewis number (C) Sherwood number (D) Stanton number

Description : NSc /NPr is called the (A) Psychrometric ratio (B) Lewis number (C) Sherwood number (D) Stanton number

Last Answer : (B) Lewis number

NRe . NPr ) (D/L) is called the __________ number (A) Peclet (B) Stanton (C) Graetz (D) None of these

Description : NRe . NPr ) (D/L) is called the __________ number (A) Peclet (B) Stanton (C) Graetz (D) None of these

Last Answer : (C) Graetz

The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Description : The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Last Answer : (D) Prandtl

Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is called the Stanton number (C) The Peclet number is a measure of the ratio of energy transport by convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Description : Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is ... convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Last Answer : (D) The Colburn jH factor for heat transfer is given by Nst Npr

NGr × NPr ) is called the __________ number. (A) Graetz (B) Rayleigh (C) Nusselt (D) Stanton

Description : NGr × NPr ) is called the __________ number. (A) Graetz (B) Rayleigh (C) Nusselt (D) Stanton

Last Answer : (B) Rayleigh

The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Last Answer : Option A

Bernoulli's equation describes the (A) Mechanical energy balance in potential flow (B) Kinetic energy balance in laminar flow (C) Mechanical energy balance in turbulent flow (D) Mechanical energy balance in boundary layer

Description : Bernoulli's equation describes the (A) Mechanical energy balance in potential flow (B) Kinetic energy balance in laminar flow (C) Mechanical energy balance in turbulent flow (D) Mechanical energy balance in boundary layer

Last Answer : (A) Mechanical energy balance in potential flow

Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Description : Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Last Answer : (B) Cross-section of the channel is reduced

For flow past a flat plate, if ‘x’ is the distance along the plate in the direction of flow, the boundary layer thickness is proportional to (A) √x (B) 1/√x (C) x (D) 1/x Answe

Description : For flow past a flat plate, if ‘x’ is the distance along the plate in the direction of flow, the boundary layer thickness is proportional to (A) √x (B) 1/√x (C) x (D) 1/x Answe

Last Answer : (A) √x

Boundary layer separation is characterised by one of the conditions given below, where 'Re' is the Reynolds number for the flow. Select the appropriate conditions. (A) Re << 1, accelerating flow (B) Re >> 1, accelerating flow (C) Re << 1, decelerating flow (D) Re >>1, decelerating flow

Description : Boundary layer separation is characterised by one of the conditions given below, where 'Re' is the Reynolds number for the flow. Select the appropriate conditions. (A) Re > 1, accelerating flow (C) Re >1, decelerating flow

Last Answer : (D) Re >>1, decelerating flow

In fluid flow, the boundary layer separation cannot occur (A) In case of boundaries experiencing form drag (B) At points of abrupt changes in the flow directions (C) In laminar flow (D) None of these

Description : In fluid flow, the boundary layer separation cannot occur (A) In case of boundaries experiencing form drag (B) At points of abrupt changes in the flow directions (C) In laminar flow (D) None of theseIn ... B) At points of abrupt changes in the flow directions (C) In laminar flow (D) None of these

Last Answer : (D) None of these

Boundary layer separation is caused by the (A) Reduction of pressure to vapour pressure (B) Boundary layer thickness reducing to zero (C) Adverse pressure gradient (D) Reduction of pressure gradient to zero

Description : Boundary layer separation is caused by the (A) Reduction of pressure to vapour pressure (B) Boundary layer thickness reducing to zero (C) Adverse pressure gradient (D) Reduction of pressure gradient to zero

Last Answer : (D) Reduction of pressure gradient to zero

An ideal nozzle design aims at (A) Minimising wall friction (B) Suppressing boundary layer separation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : An ideal nozzle design aims at (A) Minimising wall friction (B) Suppressing boundary layer separation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

The length of the tube necessary for the boundary layer to reach thecentre of the tube and for fully developed flow to be established is called the__________ length.(A) Equivalent(B) Transition(C) Prandtl mixing(D) None of these

Description : The length of the tube necessary for the boundary layer to reach thecentre of the tube and for fully developed flow to be established is called the __________ length. (A) Equivalent (B) Transition (C) Prandtl mixing (D) None of these

Last Answer : (B) Transition

Which law is followed by the velocity distribution in the turbulent boundary layer? (A) Parabolic law (B) Linear law (C) Logarithmic law (D) None of these

Description : Which law is followed by the velocity distribution in the turbulent boundary layer? (A) Parabolic law (B) Linear law (C) Logarithmic law (D) None of these

Last Answer : (C) Logarithmic law

Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Description : Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Last Answer : (A) Of real fluids