State the types of production system. Enlist four features of mass production system.

State the types of production system. Enlist four features of mass production system.
by

1 Answer

Answer :

List of Production System:

1. Intermittent production

a. Job order production system.

b. Batch order production system.

2. Continuous production

a. Mass production system.

b. Process production.

Features of mass production system.

1. In this type of production system production goes on continuously.

2. Regularity of output, quantity and workmanship need to be a higher order.

3. Simplification and standardization of the product.

4. The layout also fixed for uniform product comes out.

5. Definite machine assigned to definite work.

6. There is less wastage at all level of production.

7. Raw material is purchased in huge quantity; therefore cost of material is less as compared to other production system.

8. Labour is more efficient and specialized on account of constant repetition of the same job.

9. Per unit cost of product is less
by

Related questions

State the types of production system. Enlist four features of batch production system.

Description : State the types of production system. Enlist four features of batch production system.

Last Answer : Types of production system: a. Intermittent production:  1. Job Production 2.Batch production b. Continuous production:  1. Mass production 2. Flow production Features of batch ... adopted in batch production. Example: Pharmaceutical products, ready-made Clothes, Furniture, castings, etc

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Enlist any four basic components used in robotics systems also write their functions.

Description : Enlist any four basic components used in robotics systems also write their functions.

Last Answer : Basic components used in robotics system with their functions: 1. Arm: The arm is the part of the robot that positions the end effectors and sensors to do their pre-programmed task. 2. End-effectors ... 6. Drive: The drive is the engine or motor that moves the links into their designated positions.

Define dispatching and enlist four functions of dispatching department.

Description : Define dispatching and enlist four functions of dispatching department.

Last Answer : Definition of Dispatching: It is defined as physical handling over of manufacturing order to the operating faculties through release of orders and instructions in accordance with previously developed plan ... and other document from the shops.  6. Issue of inspection order of each operation.

Enlist types of joints used in robotic arm and draw sketch of any two

Description : Enlist types of joints used in robotic arm and draw sketch of any two

Last Answer : Types of Joints [1] Linear Joint or Prismatic joint [2] Orthogonal Joint [3] Rotational joint [4] Twisting Joint [5] Revolving joint

Enlist the various functions of PPC. Describe: (i) Scheduling (ii) Routing in details.

Description : Enlist the various functions of PPC. Describe: (i) Scheduling (ii) Routing in details.

Last Answer : Functions of PPC: Function related to material selection. Function related to selection of method. Function related to selection of machines and equipment. Routing. * Estimating. Loading ... of operation, machine used, tools and gauges used and standard time for any particular operation.

Enlist general principle of jig and fixture design.

Description : Enlist general principle of jig and fixture design.

Last Answer : General principle of jig and fixture design. 1. The jig and fixture should be as open as possible to minimize chip or burr accumulation and to enable the operator to remove the chips easily with a ... . Inserts 9. Design for safety 10. Sighting surfaces 11. Simplicity in Design 12. Economical 

Enlist the various functions of PPC.

Description : Enlist the various functions of PPC.

Last Answer : Functions of Production Planning and Control (PPC):  [1] Material Function: It includes the specification of materials, delivery dates, variety reduction procurement (Standardization) and make or ... all the factors influencing PPC which helps to identify the weak spots and corrective action.

Explain the GANTT chart used in PPC. Enlist advantages and disadvantages of it

Description : Explain the GANTT chart used in PPC. Enlist advantages and disadvantages of it

Last Answer : Gantt chart used in production planning and control. Gantt Chart is a project planning tool that can be used to represent the timing of tasks required to complete a project. Because Gantt chats ... time to maintain. 4. Lack of adequate depiction interrelationship between the separate tasks.

Enlist general principles of jigs and fixtures

Description : Enlist general principles of jigs and fixtures 

Last Answer : Principles of Jigs and Fixtures:- [1] Location Principle [2] Clamping and guiding Principle [3] Loading and unloading Principle [4] Motion Economy [5] Fool proofing [6] Rigidity [7] Clearance ... safety [14] Ejectors [15] Truninos [16] Inserts [17] Provision of coolant [18] Economy

State any four functions of production planning and control.

Description : State any four functions of production planning and control.

Last Answer : Functions of PPC: 1. Function related to material selection. 2. Function related to selection of method. 3. Function related to selection of machines and equipment. 4. Routing ... between control and future planning to improve the utilization of methods and facilities through feedback mechanism.

Explain with neat sketch any two material handling devices used in mass production.

Description : Explain with neat sketch any two material handling devices used in mass production.

Last Answer : 1.Roller conveyors may be gravity aided or powered and are employed for transporting products having flat bottoms. Bigger jobs can be handled as they are, whereas small items are put in boxes, tins ... and unloading of the products.   4.Screw Conveyor, Pneumatic Conveyor, Elevated Conveyor . 

Compare a job production with mass production.

Description : Compare a job production with mass production.

Last Answer : Comparison between Job and Mass Production with respect to different parameters:

List down the different types of production system in industry and give practical example of each type of production system.

Description : List down the different types of production system in industry and give practical example of each type of production system.

Last Answer : Types of Production system.  1. Intermittent production a. Job order production system: Examples - Repair shops, fabricators, Special purpose machine manufacturer industries, Civil works etc. ... production: Examples - Sugar industry, Steel industry, Cement industry, Paper industry etc.

Define production and list the types of production system.

Description : Define production and list the types of production system. 

Last Answer : Production:- production is any process or procedure developed to transform a set of input elements like men, materials, capital, information and energy into a specified set of output elements like ... production system. 2. Continuous production a. Mass production system. b. Process production.

State any four types of grippers used in robots with one applications of each.

Description : State any four types of grippers used in robots with one applications of each.

Last Answer : [1] Vacuum Gripper:- Flat and light weight Surfaces / Palletizing materials [2] Pneumatic Gripper:- Slightly weight parts [3] Hydraulic Gripper:- Heavy parts in industry [4] Servo electric ... objects such as steel sheets or tables [6] Claw Grippers:- Pick and lace and Assembly operations

Explain JIT system of production. State its merits

Description : Explain JIT system of production. State its merits

Last Answer : Just in time refers to the producing the part/component only when it is required. According to Just in time approach material is made available when it is demanded for further activities Just in time ... 3] To satisfy customer requirement [4] To ensure production flow [5] To optimize lead time

State the functions of production planning.

Description : State the functions of production planning.

Last Answer : Function of Production Planning: Production planning is the determination, acquisition and arrangement of all facilities necessary for future production of products. It performs following functions; [1] To ... ; D. [4] To efficiently utilize the available resources and plant facilities.

Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Description : Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Last Answer : Difference between Job and Batch Production System with respect to following parameters:

Explain the concept of production system with proper input output model.

Description : Explain the concept of production system with proper input output model.

Last Answer : Concept of Production System: The Production System of any organization is that part which produces the organizations products. [1] Production is the basic activity of any organization and all ... feedback system about the activities, which is essential to control and improve system performance.

Suggest most appropriate type of production system for manufacturing.

Description : Suggest most appropriate type of production system for manufacturing.

Last Answer : 1) Sugar – Process Production System. 2) Nuts and bolts – Batch Production System. 3) Connecting rods – Batch Production System. 4) Plastic bottles – Mass Production System. 

Explain the different types of Automated guided vehicle system and also state its functions and applications.

Description : Explain the different types of Automated guided vehicle system and also state its functions and applications.

Last Answer : Types of AGV  1. Wire guided AGVs: These AGVs follow as inductive wire as guided path. 2. AGVs having optical/chemical/magnetic guide path: These AGVs use a strip of ... Manufacturing system and Computer integrated manufacturing system. 3. Non industrial applications like hospitals, offices etc.

Define scheduling. What are various steps taken to control the production scheduled.

Description : Define scheduling. What are various steps taken to control the production scheduled.

Last Answer : Scheduling: It is the assignment of work to the facility with the specification of time. Scheduling is the time phase of loading specifying starting and end time for a particular work to be done. ... is impossible to perform according to plan, then it is necessary to re-plan the whole activities. 

Differentiate between production and productivity

Description : Differentiate between production and productivity

Last Answer : Following points differentiates production from productivity. 1. Production is step by step transformation process of inputs into outputs having desired utility and quality whereas productivity is defined as human ... may or may not be an indicator of increase in productivity and vice versa.

State types of mechanical joints used in robots. Explain any one with sketch.

Description : State types of mechanical joints used in robots. Explain any one with sketch.

Last Answer : [1] Rotational joint [2] Linear joint [3] Twisting joint [4] Orthogonal & [5] Revolving joint Rotational Joint: Rotational joint can also be represented as R - Joint. This type will allow the ... to the rotational axes. As like twisting joint, the output link spins about the input link. 

State types of plant layouts. Describe product layout with neat sketch.

Description : State types of plant layouts. Describe product layout with neat sketch.

Last Answer : Types of plant layout: 1. Product or line layout 2. Process or functional layout 3. Fixed or static layout 4. Combination layout. Product layout: 1. This layout is ... line without back-tracking or cross-movements and finally the end product leaves from the other end of the line.

Explain pull and push types of manufacturing system

Description : Explain pull and push types of manufacturing system

Last Answer : Pull Type Manufacturing System: [1] Just in Time (JIT) is a pull system which is also known as Make to Order Production. [2] Pull System means that parts are produced to order and the ... represented by "Make to Stock" (MTS) in which the production is not based on actual demand.

Explain any four factor that affects selection of site.

Description : Explain any four factor that affects selection of site.

Last Answer : Factors that affecting on selection of site. 1. Availability of raw material: As far as possible the site selected should be near the source of raw materials so that cost of transportation can be ... attitude: Mindset of the local people is also important, many times they oppose the work. 

Define method study and explain any four objectives of it.

Description : Define method study and explain any four objectives of it.

Last Answer : Method study: It is defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to develop and install an easy, rapid, efficient ... and fast material handling 7.To reduce health hazards. 8.To plan the section efficiently. 

List four material handling devices and also write one application of each.

Description : List four material handling devices and also write one application of each.

Last Answer : 1. Fork lift truck - To move and stack material at height. 2. Cranes - To lift heavy stones at height. 3. Conveyor - To move cement bags at a short and fixed distance. 4. Pipelines - To move chemical from store to storage tank. 

What are the different types of Fixtures? Explain any one with sketch.

Description : What are the different types of Fixtures? Explain any one with sketch.

Last Answer : Types of Fixtures: Following are the types of Fixtures according to the type of machine operations for which they are used. [1] Lathe (Turning) Fixture [2] Milling fixtures  [3] Grinding ... relative to the tool of the machine table and guide the broaching tool in relation to the job. 

List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Description : Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Last Answer : Types of material handling devices 1.Trucks : i) Power lift : a. Fork lift b. elevating platform ii) Hand Lift. iii) Porters trolley. 2.Tractors and trailers 3. Hoist and cranes: ... bands can also be used. 5. Speed of belt normally ranges from 1 m/s to 70 m/s.

Describe any two types of joints used in robotic arm and wrist

Description : Describe any two types of joints used in robotic arm and wrist

Last Answer : [1] Rotational joint [2] Linear joint [3] Twisting joint [4] Orthogonal & [5] Revolving joint Rotational Joint:Rotational joint can also be represented as R - Joint. This type will allow the ... the rotational axes. As like twisting joint, the output link spins about the input link.

Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine.

Description : Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine. 

Last Answer : Parameter Product layout Process layout 1) Initial investment cost. It requires higher initial investment. Less initial investment 2) Cycle Time. Less cycle time for ... similar operation are grouped together to make a section, like lathe section, milling section etc.

Describe any two joint types used in Robotic arm and wrist.

Description : Describe any two joint types used in Robotic arm and wrist.

Last Answer : Joint types used in robotic arm: 1) Linear Joint or Prismatic joint: The linear joint provides the translational sliding motion between the input and output link. The axes of the links are parallel ... to the axis of rotation of the joint. The revolving joint is shown in fig.(e)

Describe any two joints types used in robotics arms and wrist

Description : Describe any two joints types used in robotics arms and wrist 

Last Answer : Joint used in robotics arm: 1) Linear Joint or Prismatic joint: The linear joint provides the translational sliding motion between the input and output link. The axes of the links are parallel to one ... the axis of rotation of the joint. The revolving joint is shown in fig.(e)

List the different actuators. Explain any two types of actuators with advantages and disadvantages

Description : List the different actuators. Explain any two types of actuators with advantages and disadvantages

Last Answer : Actuators [1] Hydraulic Actuator [2] Electrical Actuator [3] Pneumatic Actuator [4] Mechanical Actuator Hydraulic Actuator According to Pascal, when there is an increase in ... efficiency Disadvantages [1] Requires more power [2] Possibilities of fire hazards / accidents

List the types of locators and explain any one with a neat sketch.

Description : List the types of locators and explain any one with a neat sketch.

Last Answer : 1) Adjustable locators ( Flat locators) 2) Cylindrical locators 3) Fixed V Locators 4) Conical locators 1) Flat Locator: -These are employed for locating flat machined faces of the component. ... . 5) V locator:-It is used for locating components having circular profile.

State advantages and disadvantages of ERP System.

Description : State advantages and disadvantages of ERP System. 

Last Answer : Advantages of ERP System: [1] Improved efficiency across business due to timely availability of information. [2] Better decision making owing to information integration. [3] Reduced inventory costs due ... [9] Lack of support from the ERP vendor, consultancy firm or the hardware vendor.

State basic difference between pull and push type of manufacturing system

Description : State basic difference between pull and push type of manufacturing system

Last Answer : Sr. No. Pull Type Push Type 1 Production is based on actual demand Production is not based on actual demand. It means make to stock. 2 Production schedule changes ... Make to Order Production  It is often said that Material Requirements Planning (MRP) is a Push system

State the advantages and disadvantages of combined operations.

Description : State the advantages and disadvantages of combined operations. 

Last Answer : combined operation:- if the number of operations are combined in one setting it is possible to reduce the production time and the operations can be performed with more accuracy. Advantages of ... More costly set up 3) Trained operators are necessary 4) Sometimes special machines are needed 

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

State the various stages at which inspection should be planned.

Description : State the various stages at which inspection should be planned. 

Last Answer : Stages of inspection: 1. Inspection of incoming materials, raw materials or received materials including bought out items. 2. In process inspection: It includes following stages; a. ... on completed assemblies under conditions similar to field conditions.  3. Inspection of finished goods.

State the benefits of productivity to management and workers.

Description : State the benefits of productivity to management and workers.

Last Answer : Benefits to management  a. Higher productivity earns good reputation of the firm. b. Ensures stability of the firm. c. Results in more profit. d. Result in increased sales and provide opportunity ... c. Job satisfaction and job security. d. Standard of living of worker is improved.

What is ejector? State its necessity in the design of jigs and fixtures.

Description : What is ejector? State its necessity in the design of jigs and fixtures.

Last Answer : Concept of ejector: A device, which is used to remove the work piece from the machine after completion of operation, is known as ejector. Necessity: In the design of jigs and fixture , ... been machined. Ejector speeds up the unloading of the work piece and thus increases the production rate.

State the information required to do process planning. What is working drawing?

Description : State the information required to do process planning. What is working drawing?

Last Answer : Information required to do process planning: [1] Assembly and Part drawings and Bill of Materials [2] Technical Details of Machine/Equipment to be used [3] Standard Times for operation ... their functional positions or as an exploded view where we relate the parts to their functional positions.

State and explain the basic principle to be followed to develop a good plant layout.

Description : State and explain the basic principle to be followed to develop a good plant layout.

Last Answer : Following are the basic principle to be followed to develop a good plant layout. 1. Overall integration: A good layout is one that integrates men, materials, machine and supporting ... to the production process. For this purpose there must be sufficient space between different machines.

How inspection stages are determined? State the significance of operation sheet.

Description : How inspection stages are determined? State the significance of operation sheet.

Last Answer : Following points taken into considerations for determine stages of inspection. 1. Type of production system. i.e. Job, batch or mass etc. 2. Nature of product i.e. complex which consist of more number ... sheet is one of the activity in the process plan, it helps to get a systematic process plan.