Define method study and explain any four objectives of it.

Define method study and explain any four objectives of it.
by

1 Answer

Answer :

Method study: It is defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to develop and install an easy, rapid, efficient, effective and less fatigue procedure for doing the same job and at lower costs.

Objective:

1.To improve the working processes.

2.To obtain better work place layout, neat & clean environment and working conditions.

3.To eliminate the fatigue to operators.

4.To achieve better product quality.

5.To utilize effectively the men, machine and materials.

6.To obtain efficient and fast material handling

7.To reduce health hazards.

8.To plan the section efficiently. 
by

Related questions

Define method study. State its objectives

Description : Define method study. State its objectives

Last Answer : Method study & its objectives. Definition: Method study may be defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to ... health hazards. 8. To plan the section efficiently. 9. To streamline the procedures.

What are the objectives of method study?

Description : What are the objectives of method study?

Last Answer : Objectives of Method Study: [1] To eliminate the unnecessary movements. [2] To arrange the sequence of motions in their most efficient order.  [3] To improve the manufacturing processes and ... in the work. [13] To reduce the manufacturing costs through reducing cycle time of operation.

Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Description : Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Last Answer : Different recording techniques used in method study: Process charts are used to record the data systematically so that none of the information needed for study and analysis is missed. A. Chart indicating ... area. However, there is no indication of the direction or speed of motion.

Explain the concept of line balancing. State its importance and objectives.

Description : Explain the concept of line balancing. State its importance and objectives.

Last Answer : Concept of line balancing:- A production line is said to be in balance when every worker's task takes the same amount of time. Line balancing is a manufacturingengineering function in which whole ... that output of fastest machine should be multiple of the output of the remaining other machines. 

State basic procedure for carrying out method study.

Description : State basic procedure for carrying out method study.

Last Answer : The steps followed for method study are as follows: 1. Select: Select the job to be considered for method study based on economical, technical and human consideration and define the objectives ... as a standard practice. 7. Maintain: Maintain that standard practice by regular routine checks.

State the objectives of plant layout.

Description : State the objectives of plant layout.

Last Answer : Objectives of plant layout: 1. To optimize utilization of floor area. 2. To reduce material handling and internal transportation. 3. To optimize design of stores. 4. To minimize ... 9. To provide workmen safety, convenience and comfort. 10. To improve overall productivity of plant

Define dispatching and enlist four functions of dispatching department.

Description : Define dispatching and enlist four functions of dispatching department.

Last Answer : Definition of Dispatching: It is defined as physical handling over of manufacturing order to the operating faculties through release of orders and instructions in accordance with previously developed plan ... and other document from the shops.  6. Issue of inspection order of each operation.

Explain the following terms in context with work study.

Description : Explain the following terms in context with work study.

Last Answer : i. Therbligs. ii. MTM (Method Time Measurement)  Therbligs :  1. Therbligs are used to describe the basic element of movement or fundamental hand motions of the work cycle. 2. Every ... sum of these motion times is the time an operator of average skill would take to perform the task.

List the time study equipments and its uses.

Description : List the time study equipments and its uses.

Last Answer : Time study equipments and its uses.  1. Time Stop watch- When a stop watch is used as a work measurement technique to record times and rates of working for the element of specified job carried ... and stopwatch in position.  4. Pencil, eraser, device like tachometer for checking the speed, etc.

State the significance of time study. What are the different time study equipments used to perform time study?

Description : State the significance of time study. What are the different time study equipments used to perform time study?

Last Answer : [1] It can be used to examine time of existing method [2] implemented for setting standard time required for operation [3] Used to determine performance rating of worker [4] IT can be used to ... chart etc [4] Clock/ watch 5. Boards for holding watches and paper 6. Videotape recorders.

How productivity is measured? Explain any one method of productivity measurement.

Description : How productivity is measured? Explain any one method of productivity measurement.

Last Answer : Measurement of productivity: - For measurement of productivity, one must find out input and output of the system. To measure the input resources and goods or services supplied is a critical job ... , cutting tools, coolant etc. Material productivity measures in terms of goods produced.

Explain any one method of measurement of productivity.

Description : Explain any one method of measurement of productivity.

Last Answer : Methods of measurement of productivity Various sources are utilized for production like labour, raw material, machine etc. accordingly productivity is called as labour productivity , raw material productivity, ... man hour. Labour productivity measures in terms of man hours utilised.   

Define process planning. State the factors affecting process planning and explain it.

Description : Define process planning. State the factors affecting process planning and explain it.

Last Answer : Definition of Process planning: Process planning can be defined as the systematic determination of the process by which a product is to be manufactured economically and competitively. Factors ... process engineer sufficient time to go details of each aspect to select most economical process.

Define routing. Explain in short various steps in routing procedure.

Description : Define routing. Explain in short various steps in routing procedure.

Last Answer : Definition of routing: - Routing is defined as the decision to follow the path and sequence of operations to be performed on the work piece from one machine to another. Following steps are ... prepared. - Route sheet shows the sequence of operations, their department, machines and tool used.

Define process planning and explain the steps in process planning.

Description : Define process planning and explain the steps in process planning.

Last Answer : Process Planning is the selection of a systematic method or process by which the product is to be manufactured economically and competitively. Steps: 1) Study of part drawings and its specifications. ... product. 10) Preparation of route and operation sheet which is also called process sheet.  

Define route sheet. Explain a route sheet in detail. Also state significance of it.

Description : Define route sheet. Explain a route sheet in detail. Also state significance of it.

Last Answer : Definition of Route sheet  Route sheet is written document which includes operation number, description of operation, machine used, tools and gauges used and standard time for any particular operation. The ... the efficiency of a work centre. [6] It helps to trace the material movement.

Define plant layout. Explain in detail 'Process layout' with neat sketch.

Description : Define plant layout. Explain in detail 'Process layout' with neat sketch.

Last Answer : Definition of Plant layout It is defined as the systematic arranging of various facilities like equipments, machines manpower, and inspection areas, etc and services within the area  of plant ... required for product manufacturing Less cost of investment General purpose machines are used

Define productivity and explain the methods of improving productivity.

Description : Define productivity and explain the methods of improving productivity.

Last Answer : Definition of Productivity: Productivity may be defined as the ratio of output to input. The output means the amount produced and input are the various resources employed. Productivity is the efficiency ... Works will not give 100% unless their interest in work is created by some kind of reward.

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Explain any four factor that affects selection of site.

Description : Explain any four factor that affects selection of site.

Last Answer : Factors that affecting on selection of site. 1. Availability of raw material: As far as possible the site selected should be near the source of raw materials so that cost of transportation can be ... attitude: Mindset of the local people is also important, many times they oppose the work. 

Define scheduling. What are various steps taken to control the production scheduled.

Description : Define scheduling. What are various steps taken to control the production scheduled.

Last Answer : Scheduling: It is the assignment of work to the facility with the specification of time. Scheduling is the time phase of loading specifying starting and end time for a particular work to be done. ... is impossible to perform according to plan, then it is necessary to re-plan the whole activities. 

Define production and list the types of production system.

Description : Define production and list the types of production system. 

Last Answer : Production:- production is any process or procedure developed to transform a set of input elements like men, materials, capital, information and energy into a specified set of output elements like ... production system. 2. Continuous production a. Mass production system. b. Process production.

Define productivity index. State it with respect to labour, material and machine.

Description : Define productivity index. State it with respect to labour, material and machine.

Last Answer : Productivity Index:- It is used to compare the productivity during the current year with the productivity during the base year. Base year is any year which the company users or comparative study. ... key actor in economic production/operation..It is Number o units produced per cost o material.

Define process planning and state its functions

Description : Define process planning and state its functions

Last Answer : Process Planning  Process planning can be defined as the systematic determination of the methods by which a product is to be manufactured, economically and competitively. Process planning consists of devising, selecting ... generation of NC part program. [8] To design the Jig and Fixture.

Enlist any four basic components used in robotics systems also write their functions.

Description : Enlist any four basic components used in robotics systems also write their functions.

Last Answer : Basic components used in robotics system with their functions: 1. Arm: The arm is the part of the robot that positions the end effectors and sensors to do their pre-programmed task. 2. End-effectors ... 6. Drive: The drive is the engine or motor that moves the links into their designated positions.

State any four types of grippers used in robots with one applications of each.

Description : State any four types of grippers used in robots with one applications of each.

Last Answer : [1] Vacuum Gripper:- Flat and light weight Surfaces / Palletizing materials [2] Pneumatic Gripper:- Slightly weight parts [3] Hydraulic Gripper:- Heavy parts in industry [4] Servo electric ... objects such as steel sheets or tables [6] Claw Grippers:- Pick and lace and Assembly operations

State any four functions of production planning and control.

Description : State any four functions of production planning and control.

Last Answer : Functions of PPC: 1. Function related to material selection. 2. Function related to selection of method. 3. Function related to selection of machines and equipment. 4. Routing ... between control and future planning to improve the utilization of methods and facilities through feedback mechanism.

State the types of production system. Enlist four features of mass production system.

Description : State the types of production system. Enlist four features of mass production system.

Last Answer : List of Production System: 1. Intermittent production a. Job order production system. b. Batch order production system. 2. Continuous production a. Mass production system. b. Process production. ... on account of constant repetition of the same job. 9. Per unit cost of product is less

List four material handling devices and also write one application of each.

Description : List four material handling devices and also write one application of each.

Last Answer : 1. Fork lift truck - To move and stack material at height. 2. Cranes - To lift heavy stones at height. 3. Conveyor - To move cement bags at a short and fixed distance. 4. Pipelines - To move chemical from store to storage tank. 

State the types of production system. Enlist four features of batch production system.

Description : State the types of production system. Enlist four features of batch production system.

Last Answer : Types of production system: a. Intermittent production:  1. Job Production 2.Batch production b. Continuous production:  1. Mass production 2. Flow production Features of batch ... adopted in batch production. Example: Pharmaceutical products, ready-made Clothes, Furniture, castings, etc

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

Explain various Robot configurations with neat sketch.

Description : Explain various Robot configurations with neat sketch. 

Last Answer : Different Robot Configurations: Robots are being classified on the basis of their physical configuration and control systems adopted. These classifications are briefly described as below: [1] ... direction for vertical insertion tasks. It is basically used for the assembly purpose.

Explain in brief the allowances to be considered while estimating the standard time.

Description : Explain in brief the allowances to be considered while estimating the standard time.

Last Answer : Allowances to be considered while estimating the Standard Time: Allowances are added to the normal time in order to arrive at standard time. It is impossible to work throughout the day even ... under exceptional circumstances. It is used with utmost care and only in clearly defined circumstances.

What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.

Description : What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.

Last Answer : Ejector: Ejector is used to remove the work piece from close fitted locators and is present behind the work piece. Ejector speed up the operation by reducing unloading time. This increases the ... [6] The combined mechanism used in Ejectors can be powered hydraulically or by compressed air. 

Explain the concept of JIT and how does it help the manufacturing system to improve productivity?

Description : Explain the concept of JIT and how does it help the manufacturing system to improve productivity?

Last Answer : Concept of JIT: [1] JIT is a Production methodology which aims to improve overall productivity through elimination of waste and which leads to improved quality. [2] JIT concept was ... ] It improves customer satisfaction [14] It improves working condition and relation between employees. 

Explain the importance of ‘5S’ (“Five S”) Concept.

Description : Explain the importance of ‘5S’ (“Five S”) Concept.

Last Answer : Introduction of 5 S Concept: [1] 5S is a process of workplace organization and housekeeping which is carried out gradually and systematically. [2] It is a structured program to implement workplace ... In fact, 5S is a basic step in a journey towards Total Quality Management (TQM).

What are the different types of Fixtures? Explain any one with sketch.

Description : What are the different types of Fixtures? Explain any one with sketch.

Last Answer : Types of Fixtures: Following are the types of Fixtures according to the type of machine operations for which they are used. [1] Lathe (Turning) Fixture [2] Milling fixtures  [3] Grinding ... relative to the tool of the machine table and guide the broaching tool in relation to the job. 

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Explain the need and importance of material handling devices in an industry.

Description : Explain the need and importance of material handling devices in an industry. 

Last Answer : Need of material handling devices: Material handling is an important activity in the industries. A large part of indirect labour employed in an industry is engaged in handling of materials. It has ... material handling and provides proper working conditions. 6. Reduced in process inventory.

Explain the various steps for planning a process for product from raw material to finished product in an industry.

Description : Explain the various steps for planning a process for product from raw material to finished product in an industry.

Last Answer : 1. Analysis of Product and its specification: - During analysis, following parameter should be considereda. Drawing and specification of product. b. Quality of product. c. Number of parts/components per ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

Explain the design principles of plant layout.

Description : Explain the design principles of plant layout.

Last Answer : Design Principles of Plant Layout: S.N. Design Principles Description 1 Principle of Integration All the plant facilities should be fully integrated into a single operating unit ... should be utilized in an optimum manner so as to result in minimum initial capital investment.

Explain how Gantt chart is used in project planning with proper example.

Description : Explain how Gantt chart is used in project planning with proper example. 

Last Answer : Use of Gantt Chart in Project Planning: Gantt Chart is a project planning tool that can be used to represent the timing of tasks required to complete a project. Because Gantt chats are simple to ... a chart, which are used to record the actual operating times and delays of workers and machines.

Explain the concept of production system with proper input output model.

Description : Explain the concept of production system with proper input output model.

Last Answer : Concept of Production System: The Production System of any organization is that part which produces the organizations products. [1] Production is the basic activity of any organization and all ... feedback system about the activities, which is essential to control and improve system performance.

Explain tactile sensors in robots

Description : Explain tactile sensors in robots

Last Answer : Tactile Sensors:- Tactile sensors provide the robot with the capability to respond to contact forces between itself and other objects within its work volume. Tactile sensors can be divided ... magnitude of the contact force. Strain gauge devices are typically employed in force measuring sensors.

Explain pull and push types of manufacturing system

Description : Explain pull and push types of manufacturing system

Last Answer : Pull Type Manufacturing System: [1] Just in Time (JIT) is a pull system which is also known as Make to Order Production. [2] Pull System means that parts are produced to order and the ... represented by "Make to Stock" (MTS) in which the production is not based on actual demand.

Explain any two clamping devices with neat sketch

Description : Explain any two clamping devices with neat sketch

Last Answer : [1] Screw clamp:- It is particularly useful when a component is to be gripped on its edges. This arrangement insures easy machining of top surface of work piece. [2] Equalizing clamp: - It ... is operated by simply actuating the handle up or down which locks or unlocks the strap with the work.

Explain in brief steps involved in process planning.

Description : Explain in brief steps involved in process planning.

Last Answer : Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, a. Drawing and specification of product. b. Quality of ... and fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

State and explain the basic principle to be followed to develop a good plant layout.

Description : State and explain the basic principle to be followed to develop a good plant layout.

Last Answer : Following are the basic principle to be followed to develop a good plant layout. 1. Overall integration: A good layout is one that integrates men, materials, machine and supporting ... to the production process. For this purpose there must be sufficient space between different machines.

Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Description : Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Last Answer : Types of material handling devices 1.Trucks : i) Power lift : a. Fork lift b. elevating platform ii) Hand Lift. iii) Porters trolley. 2.Tractors and trailers 3. Hoist and cranes: ... bands can also be used. 5. Speed of belt normally ranges from 1 m/s to 70 m/s.