State basic procedure for carrying out method study.

State basic procedure for carrying out method study.
by

1 Answer

Answer :

The steps followed for method study are as follows:

1. Select: Select the job to be considered for method study based on economical, technical and human consideration and define the objectives to be achieved.

2. Record: Record all the relevant facts about the present method by direct observation.

3. Examine: Examine the recorded events or facts about the job under consideration very critically.

4. Develop: Develop the best alternative by short listing of the ideas generated at critical examination. It should be economical, efficient and practically feasible.

5. Define: Define the new method with respect to process or procedure, layout, equipment, material, quality, working conditions etc.

6. Install: Install the new method as a standard practice.

7. Maintain: Maintain that standard practice by regular routine checks.
by

Related questions

Define method study. State its objectives

Description : Define method study. State its objectives

Last Answer : Method study & its objectives. Definition: Method study may be defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to ... health hazards. 8. To plan the section efficiently. 9. To streamline the procedures.

What are the objectives of method study?

Description : What are the objectives of method study?

Last Answer : Objectives of Method Study: [1] To eliminate the unnecessary movements. [2] To arrange the sequence of motions in their most efficient order.  [3] To improve the manufacturing processes and ... in the work. [13] To reduce the manufacturing costs through reducing cycle time of operation.

Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Description : Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Last Answer : Different recording techniques used in method study: Process charts are used to record the data systematically so that none of the information needed for study and analysis is missed. A. Chart indicating ... area. However, there is no indication of the direction or speed of motion.

Define method study and explain any four objectives of it.

Description : Define method study and explain any four objectives of it.

Last Answer : Method study: It is defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to develop and install an easy, rapid, efficient ... and fast material handling 7.To reduce health hazards. 8.To plan the section efficiently. 

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : A

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : C

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Description : Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Last Answer : A

Write stepwise procedure for converting raw material into finished product.

Description : Write stepwise procedure for converting raw material into finished product.

Last Answer : Planning of process from raw material to finished product:- Steps involved in process planning: 1. Analysis of Product and its specification: - During analysis, following parameter should be considered, ... fixing the rates of payment. 11. Prepare the route sheet and operation sheet.

Define routing. Explain in short various steps in routing procedure.

Description : Define routing. Explain in short various steps in routing procedure.

Last Answer : Definition of routing: - Routing is defined as the decision to follow the path and sequence of operations to be performed on the work piece from one machine to another. Following steps are ... prepared. - Route sheet shows the sequence of operations, their department, machines and tool used.

Explain the procedure of measurement of productivity? Discuss any two techniques.

Description : Explain the procedure of measurement of productivity? Discuss any two techniques.

Last Answer : Productivity Measurement: [1] Measurement plays an important role in management of productivity. It helps to determine organization is progressing well or not. It also provides information on how effectively and ... give us the productivity of an entire organization or even a nation.

State the significance of time study. What are the different time study equipments used to perform time study?

Description : State the significance of time study. What are the different time study equipments used to perform time study?

Last Answer : [1] It can be used to examine time of existing method [2] implemented for setting standard time required for operation [3] Used to determine performance rating of worker [4] IT can be used to ... chart etc [4] Clock/ watch 5. Boards for holding watches and paper 6. Videotape recorders.

State and explain the basic principle to be followed to develop a good plant layout.

Description : State and explain the basic principle to be followed to develop a good plant layout.

Last Answer : Following are the basic principle to be followed to develop a good plant layout. 1. Overall integration: A good layout is one that integrates men, materials, machine and supporting ... to the production process. For this purpose there must be sufficient space between different machines.

State basic difference between pull and push type of manufacturing system

Description : State basic difference between pull and push type of manufacturing system

Last Answer : Sr. No. Pull Type Push Type 1 Production is based on actual demand Production is not based on actual demand. It means make to stock. 2 Production schedule changes ... Make to Order Production  It is often said that Material Requirements Planning (MRP) is a Push system

Explain the following terms in context with work study.

Description : Explain the following terms in context with work study.

Last Answer : i. Therbligs. ii. MTM (Method Time Measurement)  Therbligs :  1. Therbligs are used to describe the basic element of movement or fundamental hand motions of the work cycle. 2. Every ... sum of these motion times is the time an operator of average skill would take to perform the task.

List the time study equipments and its uses.

Description : List the time study equipments and its uses.

Last Answer : Time study equipments and its uses.  1. Time Stop watch- When a stop watch is used as a work measurement technique to record times and rates of working for the element of specified job carried ... and stopwatch in position.  4. Pencil, eraser, device like tachometer for checking the speed, etc.

Enlist any four basic components used in robotics systems also write their functions.

Description : Enlist any four basic components used in robotics systems also write their functions.

Last Answer : Basic components used in robotics system with their functions: 1. Arm: The arm is the part of the robot that positions the end effectors and sensors to do their pre-programmed task. 2. End-effectors ... 6. Drive: The drive is the engine or motor that moves the links into their designated positions.

How productivity is measured? Explain any one method of productivity measurement.

Description : How productivity is measured? Explain any one method of productivity measurement.

Last Answer : Measurement of productivity: - For measurement of productivity, one must find out input and output of the system. To measure the input resources and goods or services supplied is a critical job ... , cutting tools, coolant etc. Material productivity measures in terms of goods produced.

Explain any one method of measurement of productivity.

Description : Explain any one method of measurement of productivity.

Last Answer : Methods of measurement of productivity Various sources are utilized for production like labour, raw material, machine etc. accordingly productivity is called as labour productivity , raw material productivity, ... man hour. Labour productivity measures in terms of man hours utilised.   

State the advantages and disadvantages of combined operations.

Description : State the advantages and disadvantages of combined operations. 

Last Answer : combined operation:- if the number of operations are combined in one setting it is possible to reduce the production time and the operations can be performed with more accuracy. Advantages of ... More costly set up 3) Trained operators are necessary 4) Sometimes special machines are needed 

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

State advantages and disadvantages of ERP System.

Description : State advantages and disadvantages of ERP System. 

Last Answer : Advantages of ERP System: [1] Improved efficiency across business due to timely availability of information. [2] Better decision making owing to information integration. [3] Reduced inventory costs due ... [9] Lack of support from the ERP vendor, consultancy firm or the hardware vendor.

State the functions of production planning.

Description : State the functions of production planning.

Last Answer : Function of Production Planning: Production planning is the determination, acquisition and arrangement of all facilities necessary for future production of products. It performs following functions; [1] To ... ; D. [4] To efficiently utilize the available resources and plant facilities.

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

State the various stages at which inspection should be planned.

Description : State the various stages at which inspection should be planned. 

Last Answer : Stages of inspection: 1. Inspection of incoming materials, raw materials or received materials including bought out items. 2. In process inspection: It includes following stages; a. ... on completed assemblies under conditions similar to field conditions.  3. Inspection of finished goods.

State the benefits of productivity to management and workers.

Description : State the benefits of productivity to management and workers.

Last Answer : Benefits to management  a. Higher productivity earns good reputation of the firm. b. Ensures stability of the firm. c. Results in more profit. d. Result in increased sales and provide opportunity ... c. Job satisfaction and job security. d. Standard of living of worker is improved.

What is ejector? State its necessity in the design of jigs and fixtures.

Description : What is ejector? State its necessity in the design of jigs and fixtures.

Last Answer : Concept of ejector: A device, which is used to remove the work piece from the machine after completion of operation, is known as ejector. Necessity: In the design of jigs and fixture , ... been machined. Ejector speeds up the unloading of the work piece and thus increases the production rate.

State the information required to do process planning. What is working drawing?

Description : State the information required to do process planning. What is working drawing?

Last Answer : Information required to do process planning: [1] Assembly and Part drawings and Bill of Materials [2] Technical Details of Machine/Equipment to be used [3] Standard Times for operation ... their functional positions or as an exploded view where we relate the parts to their functional positions.

How inspection stages are determined? State the significance of operation sheet.

Description : How inspection stages are determined? State the significance of operation sheet.

Last Answer : Following points taken into considerations for determine stages of inspection. 1. Type of production system. i.e. Job, batch or mass etc. 2. Nature of product i.e. complex which consist of more number ... sheet is one of the activity in the process plan, it helps to get a systematic process plan.

What is scheduling? State internal and External factors Affecting Scheduling

Description : What is scheduling? State internal and External factors Affecting Scheduling

Last Answer : Scheduling:-Scheduling means when and in what sequence the work will be done. It involves deciding as to when the work will start and in certain duration of time how much work will be ... Customers Demand 2) Customers delivery dates 3) Stock of good already lying with dealers and retailers 

State any four types of grippers used in robots with one applications of each.

Description : State any four types of grippers used in robots with one applications of each.

Last Answer : [1] Vacuum Gripper:- Flat and light weight Surfaces / Palletizing materials [2] Pneumatic Gripper:- Slightly weight parts [3] Hydraulic Gripper:- Heavy parts in industry [4] Servo electric ... objects such as steel sheets or tables [6] Claw Grippers:- Pick and lace and Assembly operations

What is lean manufacturing? state its benefits

Description : What is lean manufacturing? state its benefits

Last Answer : Lean manufacturing or lean production, often simply "lean", is a systemic method for the elimination of waste ("Muda") within a manufacturing process. Lean manufacturing is a production practice that ... to obtain higher customer satisfaction 4) It reduces per unit cost 5) It controls inventory

Draw proportionate sketch of template jig. State its use.

Description : Draw proportionate sketch of template jig. State its use.

Last Answer : Use of Template jig:- 1) This jig avoids the marking operation completely 2) Drilling is done quickly 3) Easy and Fast loading and unloading of work pieces 4) For drilling flat work pieces they can be accommodated in this jig Sketch :-

What is fool proofing of jigs and fixtures? State its importance.

Description : What is fool proofing of jigs and fixtures? State its importance. 

Last Answer : Fool Proofing of Jigs and Fixtures: It can be defined as the incorporation of design feature in the jig or fixture that will make it possible to lead the work into jig and fixture, in an ... increases [3] Wrong positioning of the work piece is avoided [4] Loading and Unloading time reduces 

State different components of Jigs and Fixtures.

Description : State different components of Jigs and Fixtures.

Last Answer : Different components of Jigs and Fixtures: 1. Body: It is a plate, box or frame type structure in which the components to be machined are loaded. It should be quite sturdy and rigid. ... in order to perform machining operations at different locations. In such case indexing elements are to be used.

State the different factors affecting process planning.

Description : State the different factors affecting process planning. 

Last Answer : Factors affecting process planning. a. Size and shape of part: The size and shape of many components decides the basic operations for the manufacturing of pert. For example : For manufacturing ... give process engineer sufficient time to go details of each aspect to select most economical process.

State different activities involved in dispatching function of PPC.

Description : State different activities involved in dispatching function of PPC.

Last Answer : Activities involved in dispatching function: 1. To issue work order to different departments. 2. To release material orders from stores. 3. To ensure release of correct tools, jigs and fixtures. 4 ... operation. 7. Return of surplus material back to store. 8. Forwarding finished part to store.

State types of mechanical joints used in robots. Explain any one with sketch.

Description : State types of mechanical joints used in robots. Explain any one with sketch.

Last Answer : [1] Rotational joint [2] Linear joint [3] Twisting joint [4] Orthogonal & [5] Revolving joint Rotational Joint: Rotational joint can also be represented as R - Joint. This type will allow the ... to the rotational axes. As like twisting joint, the output link spins about the input link. 

State the objectives of plant layout.

Description : State the objectives of plant layout.

Last Answer : Objectives of plant layout: 1. To optimize utilization of floor area. 2. To reduce material handling and internal transportation. 3. To optimize design of stores. 4. To minimize ... 9. To provide workmen safety, convenience and comfort. 10. To improve overall productivity of plant

State the information required to determine operation sequence.

Description : State the information required to determine operation sequence.

Last Answer : Following information required to determine operation sequence; 1. Specification of raw material. 2. Specification of final product. 3. Time availability for dispatch. 4. Types of machine available. 5 ... 8. Plant layout. 9. Quantity to be manufactured. 10. Tolerance and accuracy.

Define process planning. State the factors affecting process planning and explain it.

Description : Define process planning. State the factors affecting process planning and explain it.

Last Answer : Definition of Process planning: Process planning can be defined as the systematic determination of the process by which a product is to be manufactured economically and competitively. Factors ... process engineer sufficient time to go details of each aspect to select most economical process.

State types of plant layouts. Describe product layout with neat sketch.

Description : State types of plant layouts. Describe product layout with neat sketch.

Last Answer : Types of plant layout: 1. Product or line layout 2. Process or functional layout 3. Fixed or static layout 4. Combination layout. Product layout: 1. This layout is ... line without back-tracking or cross-movements and finally the end product leaves from the other end of the line.

State any four functions of production planning and control.

Description : State any four functions of production planning and control.

Last Answer : Functions of PPC: 1. Function related to material selection. 2. Function related to selection of method. 3. Function related to selection of machines and equipment. 4. Routing ... between control and future planning to improve the utilization of methods and facilities through feedback mechanism.

State the types of production system. Enlist four features of mass production system.

Description : State the types of production system. Enlist four features of mass production system.

Last Answer : List of Production System: 1. Intermittent production a. Job order production system. b. Batch order production system. 2. Continuous production a. Mass production system. b. Process production. ... on account of constant repetition of the same job. 9. Per unit cost of product is less

State the meaning of each ‘S’ in ‘5S’.

Description : State the meaning of each ‘S’ in ‘5S’.

Last Answer : Meaning of each ‘S’ in ‘5S’

State the symptoms of bad plant layout.

Description : State the symptoms of bad plant layout.

Last Answer : Symptoms of bad layout. The symptoms of bad layout are listed below: 1. Poor utilization of space. 2. Long material flow lines. 3. Congestion for movement of materials and men. 4. ... Difficult to supervise and control. 8. Spoilage of products during handling. 9. Production line bottlenecks.

Explain the different types of Automated guided vehicle system and also state its functions and applications.

Description : Explain the different types of Automated guided vehicle system and also state its functions and applications.

Last Answer : Types of AGV  1. Wire guided AGVs: These AGVs follow as inductive wire as guided path. 2. AGVs having optical/chemical/magnetic guide path: These AGVs use a strip of ... Manufacturing system and Computer integrated manufacturing system. 3. Non industrial applications like hospitals, offices etc.

State the meaning of control with its benefits.

Description : State the meaning of control with its benefits.

Last Answer : Production control is one of the most important function of manufacturing firm which plans, directs and controls the material supply and processing activities of an enterprise, so that ... . Competitive advantage-reliable delivery to customers, lower production costs and greater pricing flexibility.

Define productivity index. State it with respect to labour, material and machine.

Description : Define productivity index. State it with respect to labour, material and machine.

Last Answer : Productivity Index:- It is used to compare the productivity during the current year with the productivity during the base year. Base year is any year which the company users or comparative study. ... key actor in economic production/operation..It is Number o units produced per cost o material.

State the characteristics of lean manufacturing

Description : State the characteristics of lean manufacturing

Last Answer : Characteristics of lean manufacturing Lean manufacturing or lean production , often simply " lean ", is a systemic method for the elimination of waste (" Muda" ) within ... -line problem solving or quality circlr groups that involve employees in improvement activities.