The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity
by

1 Answer

Answer :

C
by

Related questions

The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Last Answer : c.Speed of movement

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : A

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : C

Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Description : Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Last Answer : A

The capacity of robot to carry load is known as_____. a.Load carrying capacity b.Work envelope c.Maximum reach d.None of the above

Description : The capacity of robot to carry load is known as_____. a.Load carrying capacity b.Work envelope c.Maximum reach d.None of the above

Last Answer : a.Load carrying capacity

What is end effector? Give its classification

Description : What is end effector? Give its classification 

Last Answer : In robotics, an end effector is a device or tool that's connected to the end of a robot arm where the hand would be. The end effector is the part of the robot that interacts with the ... designed. Classification:- i) Mechanical clamping ii) Magnetic clamping iii) Vocum (suction) gripping

____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Description : ____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Last Answer : a.Work envelope

From which of the following is robot programming language. (A) VAL (B) AML(C) ABD (D) Both (A) & (B)

Description : From which of the following is robot programming language. (A) VAL (B) AML (C) ABD (D) Both (A) & (B)

Last Answer : D

From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Description : From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Last Answer : D

From which of the following is benefit of robot. (A) Variety of task (B) Computer control (C) Repetitive task (D) All of the above

Description : From which of the following is benefit of robot. (A) Variety of task (B) Computer control (C) Repetitive task (D) All of the above

Last Answer : D

Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Description : Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Last Answer : B

Explain various Robot configurations with neat sketch.

Description : Explain various Robot configurations with neat sketch. 

Last Answer : Different Robot Configurations: Robots are being classified on the basis of their physical configuration and control systems adopted. These classifications are briefly described as below: [1] ... direction for vertical insertion tasks. It is basically used for the assembly purpose.

Give classification of robot sensor.

Description : Give classification of robot sensor. 

Last Answer : Classification of Robot Sensor: Robot Sensors senses and capability includes vision and hand eye coordination, touch, hearing, sensors will divided into the following categories.  [1] Vision Sensor: ... and the stored vocabulary word the robot performs some actions which correspond to the word. 

Describe cylindrical body and arm assembly robot with neat sketch.

Description : Describe cylindrical body and arm assembly robot with neat sketch.

Last Answer : Cylindrical body robot: In the cylindrical configuration, robots have one rotatory (R) joint at the base and linear (L) joints succeed to connect the links. The space in which this robot ... in horizontal direction for vertical insertion tasks. It is basically used for the assembly purpose.

Explain any one non tactile sensor used in robot

Description : Explain any one non tactile sensor used in robot

Last Answer : Non Tactile Sensor  [1] Vision Sensor: Robot vision is made possible by means of video camera, a sufficient light source and a computer programmed to process image data. The camera is mounted ... the input and the stored vocabulary word the robot performs some actions which correspond to the word.

Explain the robot anatomy and structure with sketch.

Description : Explain the robot anatomy and structure with sketch. 

Last Answer : Robot Anatomy: Robot anatomy concerns with the physical construction and characteristics of the body, arm, wrist which are components of the robot manipulator. Most robots are mounted on a base. The body is ... 6. Drive: The drive is the motor that moves the links into their designated position.

State basic procedure for carrying out method study.

Description : State basic procedure for carrying out method study.

Last Answer : The steps followed for method study are as follows: 1. Select: Select the job to be considered for method study based on economical, technical and human consideration and define the objectives ... as a standard practice. 7. Maintain: Maintain that standard practice by regular routine checks.

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Last Answer : B : Controller

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

Draw block diagram of Robot system. List function of end effector.

Description : Draw block diagram of Robot system. List function of end effector.

Last Answer : Diagram:  Functions Of An End Effector : 1. End effector is the device at the end of a robotic arm designed to interact with the environment. 2. End effectors originates from ... link of the robot. It is similar to human hand with or without finger. It incorporates various sensors.

The operating range or reach capability of robot is known as ____ in robotics a.Roll b.Pitch c.Yaw d.Speed of movement

Description : The operating range or reach capability of robot is known as ____ in robotics a.Roll b.Pitch c.Yaw d.Speed of movement

Last Answer : c.Yaw

The operating range or reach capability of robot is known as ____ in robotics. (A) Roll (B) Pitch (C) Yaw (D) Speed of movement

Description : The operating range or reach capability of robot is known as ____ in robotics. (A) Roll (B) Pitch (C) Yaw (D) Speed of movement

Last Answer : C

Internal state sensors are used for measuring which of below parameterof the end effector. A : Position B : Position & Velocity C : Velocity & acceleration D : Position, Velocity & acceleration

Description : Internal state sensors are used for measuring which of below parameterof the end effector. A : Position B : Position & Velocity C : Velocity & acceleration D : Position, Velocity & acceleration

Last Answer : D : Position, Velocity & acceleration

- In end effector internal state sensors are used for measuring (A) Position (B) Position & Velocity (C) Velocity & Acceleration (D) Position, Velocity & Acceleration

Description : - In end effector internal state sensors are used for measuring (A) Position (B) Position & Velocity (C) Velocity & Acceleration (D) Position, Velocity & Acceleration

Last Answer : D

The maximum load carried by a pile, when it continues to sink without further increase of load, is known as (A) Ultimate load carrying capacity (B) Ultimate bearing capacity (C) Ultimate bearing resistant (D) All the above

Description : The maximum load carried by a pile, when it continues to sink without further increase of load, is known as (A) Ultimate load carrying capacity (B) Ultimate bearing capacity (C) Ultimate bearing resistant (D) All the above

Last Answer : Answer: Option D

A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Description : A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Last Answer : c) manipulator

What is group technology? Give its applications.

Description : What is group technology? Give its applications.

Last Answer : Group technology is based on the general principle that many problems are similar and by grouping similar problems single solution can be found to a set of problems thus saving time and efforts. ... is used for manufacturing in automobile industry, fast food chains, doctors and dentists etc.  

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

What is ejector? State its necessity in the design of jigs and fixtures.

Description : What is ejector? State its necessity in the design of jigs and fixtures.

Last Answer : Concept of ejector: A device, which is used to remove the work piece from the machine after completion of operation, is known as ejector. Necessity: In the design of jigs and fixture , ... been machined. Ejector speeds up the unloading of the work piece and thus increases the production rate.

What is lean manufacturing? state its benefits

Description : What is lean manufacturing? state its benefits

Last Answer : Lean manufacturing or lean production, often simply "lean", is a systemic method for the elimination of waste ("Muda") within a manufacturing process. Lean manufacturing is a production practice that ... to obtain higher customer satisfaction 4) It reduces per unit cost 5) It controls inventory

Draw proportionate sketch of template jig. State its use.

Description : Draw proportionate sketch of template jig. State its use.

Last Answer : Use of Template jig:- 1) This jig avoids the marking operation completely 2) Drilling is done quickly 3) Easy and Fast loading and unloading of work pieces 4) For drilling flat work pieces they can be accommodated in this jig Sketch :-

What is fool proofing of jigs and fixtures? State its importance.

Description : What is fool proofing of jigs and fixtures? State its importance. 

Last Answer : Fool Proofing of Jigs and Fixtures: It can be defined as the incorporation of design feature in the jig or fixture that will make it possible to lead the work into jig and fixture, in an ... increases [3] Wrong positioning of the work piece is avoided [4] Loading and Unloading time reduces 

List the time study equipments and its uses.

Description : List the time study equipments and its uses.

Last Answer : Time study equipments and its uses.  1. Time Stop watch- When a stop watch is used as a work measurement technique to record times and rates of working for the element of specified job carried ... and stopwatch in position.  4. Pencil, eraser, device like tachometer for checking the speed, etc.

Explain the different types of Automated guided vehicle system and also state its functions and applications.

Description : Explain the different types of Automated guided vehicle system and also state its functions and applications.

Last Answer : Types of AGV  1. Wire guided AGVs: These AGVs follow as inductive wire as guided path. 2. AGVs having optical/chemical/magnetic guide path: These AGVs use a strip of ... Manufacturing system and Computer integrated manufacturing system. 3. Non industrial applications like hospitals, offices etc.

State the meaning of control with its benefits.

Description : State the meaning of control with its benefits.

Last Answer : Production control is one of the most important function of manufacturing firm which plans, directs and controls the material supply and processing activities of an enterprise, so that ... . Competitive advantage-reliable delivery to customers, lower production costs and greater pricing flexibility.

Explain JIT system of production. State its merits

Description : Explain JIT system of production. State its merits

Last Answer : Just in time refers to the producing the part/component only when it is required. According to Just in time approach material is made available when it is demanded for further activities Just in time ... 3] To satisfy customer requirement [4] To ensure production flow [5] To optimize lead time

Define method study. State its objectives

Description : Define method study. State its objectives

Last Answer : Method study & its objectives. Definition: Method study may be defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to ... health hazards. 8. To plan the section efficiently. 9. To streamline the procedures.

Define process planning and state its functions

Description : Define process planning and state its functions

Last Answer : Process Planning  Process planning can be defined as the systematic determination of the methods by which a product is to be manufactured, economically and competitively. Process planning consists of devising, selecting ... generation of NC part program. [8] To design the Jig and Fixture.

Explain the concept of line balancing. State its importance and objectives.

Description : Explain the concept of line balancing. State its importance and objectives.

Last Answer : Concept of line balancing:- A production line is said to be in balance when every worker's task takes the same amount of time. Line balancing is a manufacturingengineering function in which whole ... that output of fastest machine should be multiple of the output of the remaining other machines. 

____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Last Answer : A

____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Description : ____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Last Answer : B

Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Description : Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Last Answer : D

How ‘5s’ can be used as inventory reduction technique?

Description : How ‘5s’ can be used as inventory reduction technique? 

Last Answer : By applying 5S in industry to systematically results- Total organization, cleanliness and standardization in work piece. Well organized workplace. More efficient workplace. More ... of waste & making cleanliness  4. SEIKETSU means standardizing 5. SHITSUKE means self discipline 

What allowances are considered while calculating standard time?

Description : What allowances are considered while calculating standard time? 

Last Answer : following types of allowances are considered while calculating standard time. 1) Relaxation allowance a) Personal need allowance b) Fatigue allowance i) Basic fatigue allowance ii) Variable ... 2) Contingency allowance 3) Special allowance 4) Process allowance 5) Interference allowance

State the advantages and disadvantages of combined operations.

Description : State the advantages and disadvantages of combined operations. 

Last Answer : combined operation:- if the number of operations are combined in one setting it is possible to reduce the production time and the operations can be performed with more accuracy. Advantages of ... More costly set up 3) Trained operators are necessary 4) Sometimes special machines are needed 

Explain in brief the allowances to be considered while estimating the standard time.

Description : Explain in brief the allowances to be considered while estimating the standard time.

Last Answer : Allowances to be considered while estimating the Standard Time: Allowances are added to the normal time in order to arrive at standard time. It is impossible to work throughout the day even ... under exceptional circumstances. It is used with utmost care and only in clearly defined circumstances.

State advantages and disadvantages of ERP System.

Description : State advantages and disadvantages of ERP System. 

Last Answer : Advantages of ERP System: [1] Improved efficiency across business due to timely availability of information. [2] Better decision making owing to information integration. [3] Reduced inventory costs due ... [9] Lack of support from the ERP vendor, consultancy firm or the hardware vendor.