List the time study equipments and its uses.

List the time study equipments and its uses.
by

1 Answer

Answer :

Time study equipments and its uses. 

1. Time Stop watch- When a stop watch is used as a work measurement technique to record times and rates of working for the element of specified job carried out under specified conditions and for analyzing the data so as to obtain the time necessary to carry a specified job at specified level of performance is referred to as stop watch. 

2. Time study Board- It is a printed form with spaces provided for noting down the necessary information about the operation being studied, like name of operation, drawing number, and name of the worker, name of time study person, and the date and place of study. 

3. Time study observation sheets- used for holding the observation sheet and stopwatch in position. 

4. Pencil, eraser, device like tachometer for checking the speed, etc.
by

Related questions

State the significance of time study. What are the different time study equipments used to perform time study?

Description : State the significance of time study. What are the different time study equipments used to perform time study?

Last Answer : [1] It can be used to examine time of existing method [2] implemented for setting standard time required for operation [3] Used to determine performance rating of worker [4] IT can be used to ... chart etc [4] Clock/ watch 5. Boards for holding watches and paper 6. Videotape recorders.

Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Description : Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Last Answer : Applications of MH Equipments:

Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Description : Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Last Answer : Difference between Job and Batch Production System with respect to following parameters:

Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Description : Name different types of material handling equipments used in industry. Explain any one with neat sketch.

Last Answer : Types of material handling devices 1.Trucks : i) Power lift : a. Fork lift b. elevating platform ii) Hand Lift. iii) Porters trolley. 2.Tractors and trailers 3. Hoist and cranes: ... bands can also be used. 5. Speed of belt normally ranges from 1 m/s to 70 m/s.

Define method study. State its objectives

Description : Define method study. State its objectives

Last Answer : Method study & its objectives. Definition: Method study may be defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to ... health hazards. 8. To plan the section efficiently. 9. To streamline the procedures.

Explain the following terms in context with work study.

Description : Explain the following terms in context with work study.

Last Answer : i. Therbligs. ii. MTM (Method Time Measurement)  Therbligs :  1. Therbligs are used to describe the basic element of movement or fundamental hand motions of the work cycle. 2. Every ... sum of these motion times is the time an operator of average skill would take to perform the task.

What are the objectives of method study?

Description : What are the objectives of method study?

Last Answer : Objectives of Method Study: [1] To eliminate the unnecessary movements. [2] To arrange the sequence of motions in their most efficient order.  [3] To improve the manufacturing processes and ... in the work. [13] To reduce the manufacturing costs through reducing cycle time of operation.

State basic procedure for carrying out method study.

Description : State basic procedure for carrying out method study.

Last Answer : The steps followed for method study are as follows: 1. Select: Select the job to be considered for method study based on economical, technical and human consideration and define the objectives ... as a standard practice. 7. Maintain: Maintain that standard practice by regular routine checks.

Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Description : Explain the different recording techniques used in method study. Also outline process chart for checking diameter of 50mm of shaft.

Last Answer : Different recording techniques used in method study: Process charts are used to record the data systematically so that none of the information needed for study and analysis is missed. A. Chart indicating ... area. However, there is no indication of the direction or speed of motion.

Define method study and explain any four objectives of it.

Description : Define method study and explain any four objectives of it.

Last Answer : Method study: It is defined as the systematic investigation (i.e. recording and critical examination) of the existing method of doing a job in order to develop and install an easy, rapid, efficient ... and fast material handling 7.To reduce health hazards. 8.To plan the section efficiently. 

List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

List down the different types of production system in industry and give practical example of each type of production system.

Description : List down the different types of production system in industry and give practical example of each type of production system.

Last Answer : Types of Production system.  1. Intermittent production a. Job order production system: Examples - Repair shops, fabricators, Special purpose machine manufacturer industries, Civil works etc. ... production: Examples - Sugar industry, Steel industry, Cement industry, Paper industry etc.

Define production and list the types of production system.

Description : Define production and list the types of production system. 

Last Answer : Production:- production is any process or procedure developed to transform a set of input elements like men, materials, capital, information and energy into a specified set of output elements like ... production system. 2. Continuous production a. Mass production system. b. Process production.

List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Description : List down eight important steps for planning a process for a product from raw material to finished product in an industry.

Last Answer : Steps for Process Planning for a Product from Raw Material to Finished Product: Specific activities involved in planning a process for a product from raw material to finished product in an ... gauges required for inspection. This operation described in detail, in later section of this chapter.

List the different actuators. Explain any two types of actuators with advantages and disadvantages

Description : List the different actuators. Explain any two types of actuators with advantages and disadvantages

Last Answer : Actuators [1] Hydraulic Actuator [2] Electrical Actuator [3] Pneumatic Actuator [4] Mechanical Actuator Hydraulic Actuator According to Pascal, when there is an increase in ... efficiency Disadvantages [1] Requires more power [2] Possibilities of fire hazards / accidents

List the types of locators and explain any one with a neat sketch.

Description : List the types of locators and explain any one with a neat sketch.

Last Answer : 1) Adjustable locators ( Flat locators) 2) Cylindrical locators 3) Fixed V Locators 4) Conical locators 1) Flat Locator: -These are employed for locating flat machined faces of the component. ... . 5) V locator:-It is used for locating components having circular profile.

List advantages and disadvantages of Lean manufacturing.

Description : List advantages and disadvantages of Lean manufacturing. 

Last Answer : Advantages 1. Increased overall productivity. 2. Reduced amount of floor space required. 3. Reduced manufacturing lead time. 4. Improved flexibility to react to changes. 5. Improved quality. ... processes to implement lean principle. 2. Long term commitment required. 3. Very risky process.

List four material handling devices and also write one application of each.

Description : List four material handling devices and also write one application of each.

Last Answer : 1. Fork lift truck - To move and stack material at height. 2. Cranes - To lift heavy stones at height. 3. Conveyor - To move cement bags at a short and fixed distance. 4. Pipelines - To move chemical from store to storage tank. 

What allowances are considered while calculating standard time?

Description : What allowances are considered while calculating standard time? 

Last Answer : following types of allowances are considered while calculating standard time. 1) Relaxation allowance a) Personal need allowance b) Fatigue allowance i) Basic fatigue allowance ii) Variable ... 2) Contingency allowance 3) Special allowance 4) Process allowance 5) Interference allowance

Explain in brief the allowances to be considered while estimating the standard time.

Description : Explain in brief the allowances to be considered while estimating the standard time.

Last Answer : Allowances to be considered while estimating the Standard Time: Allowances are added to the normal time in order to arrive at standard time. It is impossible to work throughout the day even ... under exceptional circumstances. It is used with utmost care and only in clearly defined circumstances.

Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine.

Description : Differentiate between product layout and process layout on the basis of 1) Initial investment cost. 2) Cycle Time. 3) Types of machines used. 4) Skill of labour required. 5) Inventory level. 6) Arrangement of machine. 

Last Answer : Parameter Product layout Process layout 1) Initial investment cost. It requires higher initial investment. Less initial investment 2) Cycle Time. Less cycle time for ... similar operation are grouped together to make a section, like lathe section, milling section etc.

If worker takes 15 min as a standard time for as job in which total allowance is 20% of normal time. If the rating of the worker is 100 %. Find the actual time required by the worker

Description : If worker takes 15 min as a standard time for as job in which total allowance is 20% of normal time. If the rating of the worker is 100 %. Find the actual time required by the worker

Last Answer : Standard Time (ST) = 15 Minutes Rating Factor (RF) = 100 % Allowance = 20 % of Normal Time (NT) Standard Time (ST) = Normal Time (NT) + Allowance 15 = NT + (20/100) NT 15 = ... (Actual) Time Actual (Observed) Time (AT) required by the worker to complete the job is 12.5 Minutes.

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

What is end effector? Give its classification

Description : What is end effector? Give its classification 

Last Answer : In robotics, an end effector is a device or tool that's connected to the end of a robot arm where the hand would be. The end effector is the part of the robot that interacts with the ... designed. Classification:- i) Mechanical clamping ii) Magnetic clamping iii) Vocum (suction) gripping

What is group technology? Give its applications.

Description : What is group technology? Give its applications.

Last Answer : Group technology is based on the general principle that many problems are similar and by grouping similar problems single solution can be found to a set of problems thus saving time and efforts. ... is used for manufacturing in automobile industry, fast food chains, doctors and dentists etc.  

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

What is ejector? State its necessity in the design of jigs and fixtures.

Description : What is ejector? State its necessity in the design of jigs and fixtures.

Last Answer : Concept of ejector: A device, which is used to remove the work piece from the machine after completion of operation, is known as ejector. Necessity: In the design of jigs and fixture , ... been machined. Ejector speeds up the unloading of the work piece and thus increases the production rate.

What is lean manufacturing? state its benefits

Description : What is lean manufacturing? state its benefits

Last Answer : Lean manufacturing or lean production, often simply "lean", is a systemic method for the elimination of waste ("Muda") within a manufacturing process. Lean manufacturing is a production practice that ... to obtain higher customer satisfaction 4) It reduces per unit cost 5) It controls inventory

Draw proportionate sketch of template jig. State its use.

Description : Draw proportionate sketch of template jig. State its use.

Last Answer : Use of Template jig:- 1) This jig avoids the marking operation completely 2) Drilling is done quickly 3) Easy and Fast loading and unloading of work pieces 4) For drilling flat work pieces they can be accommodated in this jig Sketch :-

What is fool proofing of jigs and fixtures? State its importance.

Description : What is fool proofing of jigs and fixtures? State its importance. 

Last Answer : Fool Proofing of Jigs and Fixtures: It can be defined as the incorporation of design feature in the jig or fixture that will make it possible to lead the work into jig and fixture, in an ... increases [3] Wrong positioning of the work piece is avoided [4] Loading and Unloading time reduces 

Explain the different types of Automated guided vehicle system and also state its functions and applications.

Description : Explain the different types of Automated guided vehicle system and also state its functions and applications.

Last Answer : Types of AGV  1. Wire guided AGVs: These AGVs follow as inductive wire as guided path. 2. AGVs having optical/chemical/magnetic guide path: These AGVs use a strip of ... Manufacturing system and Computer integrated manufacturing system. 3. Non industrial applications like hospitals, offices etc.

State the meaning of control with its benefits.

Description : State the meaning of control with its benefits.

Last Answer : Production control is one of the most important function of manufacturing firm which plans, directs and controls the material supply and processing activities of an enterprise, so that ... . Competitive advantage-reliable delivery to customers, lower production costs and greater pricing flexibility.

Explain JIT system of production. State its merits

Description : Explain JIT system of production. State its merits

Last Answer : Just in time refers to the producing the part/component only when it is required. According to Just in time approach material is made available when it is demanded for further activities Just in time ... 3] To satisfy customer requirement [4] To ensure production flow [5] To optimize lead time

Define process planning and state its functions

Description : Define process planning and state its functions

Last Answer : Process Planning  Process planning can be defined as the systematic determination of the methods by which a product is to be manufactured, economically and competitively. Process planning consists of devising, selecting ... generation of NC part program. [8] To design the Jig and Fixture.

Explain the concept of line balancing. State its importance and objectives.

Description : Explain the concept of line balancing. State its importance and objectives.

Last Answer : Concept of line balancing:- A production line is said to be in balance when every worker's task takes the same amount of time. Line balancing is a manufacturingengineering function in which whole ... that output of fastest machine should be multiple of the output of the remaining other machines. 

From which of the following is robot programming language. (A) VAL (B) AML(C) ABD (D) Both (A) & (B)

Description : From which of the following is robot programming language. (A) VAL (B) AML (C) ABD (D) Both (A) & (B)

Last Answer : D

____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Last Answer : A

____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Description : ____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Last Answer : B

From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Description : From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Last Answer : D

Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Description : Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Last Answer : D

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : A

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : C

Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Description : Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Last Answer : A

From which of the following is benefit of robot. (A) Variety of task (B) Computer control (C) Repetitive task (D) All of the above

Description : From which of the following is benefit of robot. (A) Variety of task (B) Computer control (C) Repetitive task (D) All of the above

Last Answer : D

Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Description : Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Last Answer : B

How ‘5s’ can be used as inventory reduction technique?

Description : How ‘5s’ can be used as inventory reduction technique? 

Last Answer : By applying 5S in industry to systematically results- Total organization, cleanliness and standardization in work piece. Well organized workplace. More efficient workplace. More ... of waste & making cleanliness  4. SEIKETSU means standardizing 5. SHITSUKE means self discipline 

State the advantages and disadvantages of combined operations.

Description : State the advantages and disadvantages of combined operations. 

Last Answer : combined operation:- if the number of operations are combined in one setting it is possible to reduce the production time and the operations can be performed with more accuracy. Advantages of ... More costly set up 3) Trained operators are necessary 4) Sometimes special machines are needed 

Explain various Robot configurations with neat sketch.

Description : Explain various Robot configurations with neat sketch. 

Last Answer : Different Robot Configurations: Robots are being classified on the basis of their physical configuration and control systems adopted. These classifications are briefly described as below: [1] ... direction for vertical insertion tasks. It is basically used for the assembly purpose.

State advantages and disadvantages of ERP System.

Description : State advantages and disadvantages of ERP System. 

Last Answer : Advantages of ERP System: [1] Improved efficiency across business due to timely availability of information. [2] Better decision making owing to information integration. [3] Reduced inventory costs due ... [9] Lack of support from the ERP vendor, consultancy firm or the hardware vendor.