Define permeability and reluctivity of magnetic material.

Define permeability and reluctivity of magnetic material. 
by

1 Answer

Answer :

Permeability is the capability of a specific material to allow the flow of magnetic flux more easily. Thus higher permeability enables a material to pass more magnetic flux.

Reluctivity is equal to the ratio of the intensity of the magnetic field to the magnetic induction of the material.


by

Related questions

Draw BH Curve and define coercivity and reluctivity.

Description : Draw BH Curve and define coercivity and reluctivity.

Last Answer : BH Curve: Definitions: Coercivity: For ferromagnetic material the coercivity is the intensity of the applied magnetic field required to reduce the magnetization of that material to zero after the ... to the ratio of intensity of the magnetic field to the magnetic induction of the material. 

Draw the B-H curve for hard and soft magnetic material.

Description : Draw the B-H curve for hard and soft magnetic material.

Last Answer : Diagram: The B-H curve for hard and soft magnetic material

What is magnetic material ? State it’s two applications.

Description : What is magnetic material ? State it’s two applications.

Last Answer : Magnetic materials are those materials that can be either attracted or repelled when placed in an external magnetic field and can be magnetized themselves. OR The materials which provide path to ... . Applications: 1.Floppy disc ,hard disc  2.Motors and generators  3.Biomedical equipment

Reciprocal of permeability is (a) reluctivity (b) susceptibility (c) permittivity (d) conductance

Description : Reciprocal of permeability is (a) reluctivity (b) susceptibility (c) permittivity (d) conductance

Last Answer : (a) reluctivity

Compare soft magnetic materials and hard magnetic materials.

Description : Compare soft magnetic materials and hard magnetic materials.

Last Answer : Sr. No. Soft magnetic materials  Hard magnetic materials  1 It has high resistivity It has low resistivity 2 It has low coercivity It has high coercivity 3 It has ... It has high residual magnetism 4 It is easily magnetized It is not easily magnetized.

State operating principle of LED. Write material names used to manufacture LED.

Description : State operating principle of LED. Write material names used to manufacture LED.

Last Answer : Principle of Operation of LED:  When an LED is forward biased, the electron in the n-region will cross the junction and recombine with the holes is p-type. When the recombination takes ... Gallium Arsenide Phosphite (GaAsP) : Red or Yellow. Gallium Phosphite (GaP) : Red or Green.

Which material is used for manufacturing of following LED ? (i) Infrared LED (ii) Red or Green LED (ii) Red or Yellow LED (iv) Blue LED

Description : Which material is used for manufacturing of following LED ? (i) Infrared LED (ii) Red or Green LED (ii) Red or Yellow LED (iv) Blue LED

Last Answer : Infrared LED : Aluminum gallium arsenide (AlGaAs) Red or Green LED: Indium gallium nitride (InGaN), Aluminum gallium arsenide (AlGaAs) Red or Yellow LED : Aluminum gallium indium phosphide (AlGaInP), Aluminum gallium arsenide (AlGaAs) Blue LED : Indium gallium nitride (InGaN)

What is dielectric material? Enlist dielectric material used in capacitor.

Description : What is dielectric material? Enlist dielectric material used in capacitor.

Last Answer : A dielectric material is an electrical insulator that can be polarized by an applied electric field. Dielectric materials used in capacitor: porcelain (ceramic), mica, glass, plastics, and the oxides of various metals

Define rectification efficiency. Give its formula.

Description : Define rectification efficiency. Give its formula.

Last Answer : The ratio of output DC power delivered to the load to the applied input AC power is called rectification efficiency. It is denoted by η. η = Output DC power delivered to the load / Input AC power from transformer secondary η = Pdc / Pac

Define following terms: i) Active networks. ii) Unilateral networks

Description : Define following terms: i) Active networks. ii) Unilateral networks

Last Answer : i) Active networks: If a network consists of an energy source then it is called an active network. The type of energy source can be a voltage source or a current source. ii) ... direction of current through its elements in it, then the network is called as a unilateral network.

Define Ferromagnetic materials. Draw B- H Curve.

Description : Define Ferromagnetic materials. Draw B- H Curve.

Last Answer : Ferromagnetic materials: The materials which possess magnetism in the absence of applied magnetic field is known as ferromagnetic materials.

Define dynamic resistance of diode. State, how it is calculated using forward characteristics of diode.

Description : Define dynamic resistance of diode. State, how it is calculated using forward characteristics of diode.

Last Answer : Definition: The resistance offered by the diode to the AC operating conditions is known as the Dynamic resistance' or Incremental resistance' or AC resistance' of a diode. It is ... Dynamic resistance is actually the reciprocal of the slope of the forward characteristics.

Define : (i) Efficiency (ii) TUF of Rectifier

Description : Define : (i) Efficiency (ii) TUF of Rectifier

Last Answer : Rectifier efficiency (ɳ) : it is defined as the ratio of DC power to the applied input AC power. Transformer utilization factor: It is defined as the ratio of the DC power available at the load resistor and the AC rating of the secondary coil of a transformer.

Define (i) Open circuit (ii) Short circuit.

Description : Define (i) Open circuit (ii) Short circuit.

Last Answer : Open circuit : An electrical circuit is said to be open,when any part of conducting path is open or broken and there is no continuity in the conducting path of an electrical circuit. Short circuit : An electrical circuit is said to be short,when voltage source has closed path across its terminal.

Define Inductor. Draw its symbol.

Description : Define Inductor. Draw its symbol. 

Last Answer : An inductor is a passive electronic component that stores energy in the form of a magnetic field  

Define: (1) Mesh (2) Sign conversion (3) Potential rise (4) Potential Drop

Description : Define: (1) Mesh (2) Sign conversion (3) Potential rise (4) Potential Drop

Last Answer : Mesh: A mesh is a closed path in a circuit with no other paths inside it.  Sign convention: In an electrical circuit, the notation given to the voltage drop across resistance and the ... because current flows from a higher to a lower potential then the potential drop is considered Negative.

Draw V-I characteristics of p-n junction diode? Define static and dynamic resistance of diode.

Description : Draw V-I characteristics of p-n junction diode? Define static and dynamic resistance of diode.

Last Answer : Static Resistance: The resistance offered by a p-n junction diode when it is connected to a DC circuit is called static resistance.  (OR) It is the ratio of DC voltage applied across diode ... The dynamic resistance of a diode is the ratio of change in voltage to the change in current. 

Define clipper and clamper.

Description : Define clipper and clamper.

Last Answer : Clipper: The circuit with which the waveform is shaped by removing (or clipping) a portion of the applied wave is known as a clipper.  Clamper: A circuit that shifts either positive or negative peak ... a clamping circuits or clamper. These circuits are also called D.C. restorer or D.C. inserter

Define rectifier. State its types.

Description : Define rectifier. State its types.

Last Answer : A rectifier is defined as an electronic device which converts alternating (AC) voltage or current into unidirectional/ pulsating (D.C) voltage or current. Types of Rectifier: 1. Half wave rectifier 2. Full wave rectifier a. Centre tapped full wave rectifier b. Full wave bridge rectifier

Define given parameters and state their values for bridge rectifier (i) Ripple factor (ii) PIV of diode.

Description : Define given parameters and state their values for bridge rectifier (i) Ripple factor (ii) PIV of diode.

Last Answer : Ripple Factor: Ripple Factor is defined as the ratio of RMS value of the AC component of output to the DC or average value of the output. Mathematically it is expressed as, ( ... which appears across non-conducting reverse biased diode. (ii) PIV of diode for bridge rectifier-Vm

Define static and dynamic resistance of diode.

Description : Define static and dynamic resistance of diode.

Last Answer : Static resistance (Rf) :Static Resistance of a P-N junction diode is the ratio of forward voltage to forward current.   Dynamic Resistance (rf): Dynamic Resistance of a P-N junction diode ... small change in forward voltage to small change in forward current at a particular operating point.  

Define self-inductance and mutual inductance.

Description : Define self-inductance and mutual inductance.

Last Answer : Self-inductance: As per the Lenz's law, the self-inducedemf opposes any current change taking place. This property of the coil to oppose any change in current flowing through it is known as the self- ... in the other coil placed nearby, by induction. It is denoted by M and measured in Henry.  

Define linear and non-linear wave-shaping circuit.

Description : Define linear and non-linear wave-shaping circuit.

Last Answer : Linear wave-shaping circuit  The circuit which makes use of only linear circuit elements is known as linear wave shaping circuits. Resistor, capacitor, inductor are used for the circuits. E.g. ... , transistor, resistors and capacitors etc. are used for the circuits. E.g. Clipper, Clamper

Define clipper. Draw circuit of negative shunt clipper.

Description : Define clipper. Draw circuit of negative shunt clipper.

Last Answer : Clipper: A clipper is a device designed to prevent the output of a circuit from exceeding a predetermined voltage level without distorting the remaining part of the applied waveform. OR Clipper: An ... the positive or negative peak or both from a specific level is known as clipper.

Define i)Linear network ii)Non-linear network iii)Bilateral network iv)Unilateral network

Description : Define i)Linear network ii)Non-linear network iii)Bilateral network iv)Unilateral network

Last Answer : Linear Network: If the characteristics, parameter such as resistances, capacitances, inductances etc. remain constant irrespective of changes in temperature, time, voltage etc. then the circuit or network ... current through its elements in it, then the network is called as a unilateral network.

Define self and mutual induced emf.

Description : Define self and mutual induced emf.

Last Answer : Self-induced emf: Self-induced emf is the e.m.f induced in the coil due to the change of flux produced by linking it with its own turns. Mutual induced emf: The emf induced in a coil due to the change of flux produced by another neighbouring coil linking to it, is called Mutually Induced emf.   

Define ferromagnetic and ferrimagnetic materials.

Description : Define ferromagnetic and ferrimagnetic materials.

Last Answer : Ferromagnetic materials: The materials which possess magnetism in the absence of applied magnetic field is known as ferromagnetic materials. Example: iron, nickel, cobalt Ferrimagnetic ... a spontaneous magnetization. Example: Magnetite, Ferrous ferrite, Nickel ferrite, Manganese ferrite.

Define active and passive network.

Description : Define active and passive network. 

Last Answer : Active network :If a network consists of an energy source, then it is called as an active network. The type of energy source can be voltage source or a current source.  Passive network : If a network does not contain any energy source then it is called as the passive network. 

Draw construction of PVC gang capacitor and describe it’s working.

Description : Draw construction of PVC gang capacitor and describe it’s working.

Last Answer :  Diagram Working  In plastic core capacitor, poly-vinyl chloride (PVC) type of plastic film is used as dielectric between the fixed & movable vanes instead of air. This increases ... & results in great reduction of size of capacitor in comparison with the air core capacitor.

Describe construction of Aluminium Electrolytic capacitor.

Description : Describe construction of Aluminium Electrolytic capacitor.

Last Answer : A plain foil dry electrolytic capacitor is made by forming a coating of aluminium oxide on both sides of an aluminium foil. Two strips of aluminium foil used are then separated by two layers of porous ... is rolled up the ends closed with wax and then sealed into an aluminium container.

List two applications of LDR.

Description : List two applications of LDR.

Last Answer : 1. It is used for automatic contrast of brightness control in television receivers. 2. It is used as a proximity switch. 3. It is used in the street light control circuits. 4. It is used in the ... security alarms. 9. It is used in the smoke detectors. 10. It is used in the infrared astronomy.

Explain the working principle of slug tuned inductor.

Description : Explain the working principle of slug tuned inductor.

Last Answer : The value of inductor increases, when the slug (moving coil) is moved into the coil winding and hence decreases the resonant frequency of the tuned circuit. Similarly, when the slug is moved out of the ... be varied by using movable core which can be moved up or down by using screw driver.

Draw the star and delta connection. State any one conversion formula.

Description : Draw the star and delta connection. State any one conversion formula.

Last Answer : star and delta connection

Explain the following terms 1. Bilateral Network 2. Linear Network

Description : Explain the following terms 1. Bilateral Network 2. Linear Network

Last Answer : Bilateral Network If the magnitude of current flowing through a circuit element is not affected when the polarity of the applied voltage is changed, then the element is known as a bilateral element. ... network comprising of one or more linear number of elements is known as a linear network.

Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode.

Description : Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode. 

Last Answer : Construction A PIN diode is made up of three semiconductor materials; two heavily doped P- and N- type material separated by an intrinsic (undoped) semiconductor (I) as shown in above figure ... . This advantage allows the PIN diode to process even weak signals.  Characteristics

Draw the construction diagram of air core inductor. List two applications

Description : Draw the construction diagram of air core inductor. List two applications

Last Answer : Applications: i. It is used for construction of IF and RF tuning coils. ii. It is used for interstage coupling.

Explain the working of TDR along with its symbol and characteristics.

Description : Explain the working of TDR along with its symbol and characteristics. 

Last Answer : TDR are also called as thermistors. Thermally sensitive materials are used to manufacture thermistors. Depending on the temperature co- efficient of resistance value thermistors are classified as ... used when a drastic change in resistance is required at specific temperature. RαT

State four applications of PIN diode.

Description : State four applications of PIN diode. 

Last Answer : i. Used in rectifier circuit. ii. Used in clipping and clamping circuit. iii. Used for A.M detection. iv. Used for voltage multiplier.

Draw the circuit diagram of bridge rectifier and label it.

Description : Draw the circuit diagram of bridge rectifier and label it. 

Last Answer : Circuit Diagram Bridge rectifier

Draw a label diagram of ferrite core inductor.

Description : Draw a label diagram of ferrite core inductor.

Last Answer : Ferrite core inductor

Convert the delta network into equivalent star network.

Description : Convert the delta network into equivalent star network.

Last Answer : Delta to start network R1 = 4x6/ 4+6+2 = 24/12 =2/1= 2Ω R2 = 2x6/ 4+6+2 = 12/12= 1 = 1Ω R3 = 4x 2/ 4+6+2 = 8/12= 2/3= 0.66Ω

Compare: 1. Active and passive network 2. Linear and non-linear network

Description : Compare: 1. Active and passive network 2. Linear and non-linear network

Last Answer : 1. Active network and passive network. Sr.No Active network Passive network 1 If a network consists of an energy source, then it is called as an active network. If ... only to the linear networks.  The superposition theorem also is not applicable to the nonlinear networks.

State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Description : State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Last Answer : Condition for RC differentiator: If the time duration T of the input waveform is comparable with the RC time constant (product of R and C) then the output waveform of the differentiator gets distorted. Hence for proper differentiator the condition is as follows: T >>RC

Compare clipper and clamper

Description : Compare clipper and clamper

Last Answer : Sr. No Parameter Clipper Clamper 1 Components used Diode, Resistors  Diode, Capacitors, Resistors 2 Function To remove a part of input waveform To add a DC ... Application Diode clamp, wave shaping circuits  Voltage Multipliers  5 Configuration

Draw the clipper circuit using series and shunt diode.

Description : Draw the clipper circuit using series and shunt diode.

Last Answer : Fig: A series negative clipper (OR) Fig: Series positive clipper Fig: Parallel positive clipper (OR) Fig: Parallel negative clipper

Explain the colour coding using colour band system in capacitor with an example.

Description : Explain the colour coding using colour band system in capacitor with an example.

Last Answer : 1. First and second band gives the significant digit reading from left to right. 2. Third colour band gives the multiplier. 3. Fourth colour band gives the tolerance value. 4. Fifth and sixth bands ... , Violet, Yellow To find : Value of capacitor Solution: Yellow: 4  Violet: 7

Write the function of C and L in π filter and write two advantages of π filter over other filters.

Description : Write the function of C and L in π filter and write two advantages of π filter over other filters.

Last Answer : The capacitors C1 and C2 provide a low reactance path for the ripple whereas the series inductor L provides a high reactance to the ac ripple. The combined effect of this is the reduction in ripple, and ... very low. 4. High dc voltage (approximately Vm) 5. Increase in the average load voltage. 

Draw the circuit diagram of shunt capacitor filter along with full wave rectifier. Draw the waveform of full wave rectifier output and shunt capacitor filter output.

Description : Draw the circuit diagram of shunt capacitor filter along with full wave rectifier. Draw the waveform of full wave rectifier output and shunt capacitor filter output.

Last Answer : Fig: Shunt capacitor filter along with full wave rectifier Fig: Waveform of full wave rectifier output and shunt capacitor filter output.

List four specifications of zener diode or P- N junction diode.

Description : List four specifications of zener diode or P- N junction diode.

Last Answer : Specifications of zener diode: 1. Zener voltage 2. Power dissipation 3. Maximum power dissipation PD(max) 4. Breakdown current 5. Dynamic resistance 6. Maximum reverse current. (OR) ... Reverse saturation current 5. Power dissipation 6. Junction temperature 7. Peak inverse voltage (PIV)

Draw the constructional diagram of iron core inductor and write the working of it.

Description : Draw the constructional diagram of iron core inductor and write the working of it.

Last Answer : Iron core inductors allow high inductance value but are limited in high frequency capacity due to hysteresis and eddy current losses. Iron core increases the magnetic induction of a ... certain point this result in a useful increase in inductance. Beyond that point, inductance decreases.