Explain the various stages of combustion in SI engines.

Explain the various stages of combustion in SI engines.
by

1 Answer

Answer :

The stages of combustion in SI engines

Stage I:-Ignition Lag or Preparation Phase.

Stage II: - Propagation of flame.

Stage III: - After burning. 

image

by

Related questions

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Draw P-ⱷ diagram showing stages of combustion in SI engine.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

State the drawbacks of carbureted (SI) engines on the basis of fuel distribution, emission, power output and fuel consumption.

Description : State the drawbacks of carbureted (SI) engines on the basis of fuel distribution, emission, power output and fuel consumption.

Last Answer :  Drawbacks of carburetted S.I. engine: 1) Fuel distribution- Mal-distribution of charge. 2) Emission- More emissin 3) Power output- Less 4) Fuel consumption - More

Compare performance characteristics of SI and CI engines.

Description : Compare performance characteristics of SI and CI engines. 

Last Answer : Variable/Parameter SI Engine CI Engine Power output per unit weight 2.7 Kg/Kw 6.5 Kg/Kw Power output per unit displacement 30 Kw/liter 15 Kw/liter Acceleration Not ... load, idling.  Fuel safety More volatile so less safer Less volatile so more safer

State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Description : State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Last Answer : 1) T Head Type Combustion chambers 2) L Head Type Combustion chambers 3) F- Head combustion chamber 4) Over head valve or I head combustion chamber 5) Hemispherical combustion chamber 6) Bathtub ... - Head combustion chamber 4) Over head valve or I head combustion chamber

List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Description : List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Last Answer : 1 Petrol 2. Diesel 3. LPG 4. CNG 5.Hydrogen 6.Alcohol 7.Bio diesel Properties biodiesel  i) It is a renewable substitute fuel for petroleum diesel. ii) It has lower exhaust ... diesel vi) It is an environmentally friendly fuel that an be used in any diesel engine without modification.

State the pollutants from gasoline engines. And explain why it is formed?

Description :  State the pollutants from gasoline engines. And explain why it is formed?

Last Answer : Pollutants from gasoline engine 1. Carbon monoxide (CO) 2. Hydrocarbons (HC) 3. Oxides of nitrogen (NO) 4. Sulpher Cause of pollutants formed 1. Pollutants are produced by the incomplete ... in the combustion chamber. 2. Due to no maintenance. 3. Crankcase blowby 4. Evaporative losses.

Describe air fuel- ratio requirements for diesel engines at no load to full load.

Description : Describe air fuel- ratio requirements for diesel engines at no load to full load.

Last Answer : Irrespective of load at any given speed, an approximately constant supply of air enters the cylinder. With change in load, the quantity of fuel injected is changed varying the air fuel ratio. The ... engine always designed to operate with an excess air of 15 to 40% depending upon the application

Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Description : Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Last Answer : Sr. No. Carburetted engine Electronic Fuel Injection (EFI) engine 1 Fuel atomization depends upon velocity of air in the venturi. Atomization of fuel is independent of cranking ... occurs in carbureted engine. Equal quantity of fuel is supplied to port for each cylinder

Give advantages and disadvantages of LPG as a fuel for automobile engines.

Description : Give advantages and disadvantages of LPG as a fuel for automobile engines.

Last Answer : Advantages of LPG 1. It is cheaper than petrol 2. It is highly detonation resistant and does not pre-ignite easily. 3. It gives better manifold distribution and mixes easily with air. 4. Residue ... 13. It is safe only if proper periodic maintenance of the gas system is done by trained person. 

Sketch and Explain F-head combustion chamber.

Description : Sketch and Explain F-head combustion chamber.

Last Answer : In F-head combustion chamber one valve is in head and other in the block. This design is a compromise between L-head and I head combustion chambers. Advantages are : High volumetric ... This design is the complex mechanism for operation of valves and expensive special shaped piston. 

List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Last Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

State four drawbacks of carbureted SI engine

Description : State four drawbacks of carbureted SI engine 

Last Answer : Drawbacks of carbureted SI engine: 1) No altitude compensation. 2) Mal-distribution of charge. 3) Variation in air: fuel ratio. 4) Inaccurate metering of charge. 5) Does not meet emission ... in poor efficiency. 10) Backfiring may take place. 11) Carburetor Icing may take place.

Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Description : Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Last Answer : Drawbacks of carbureted (SI) Engine. Parameter Drawbacks Emission Does not meet emission Norms Fuel consumption Due to absence of throttling specific fuel consumption is ... distribution of charge. Fuel distribution for each cylinder is not equal for multi cylinder engine.

What is mean by ignition limit? Give ignition limit for SI engine.

Description : What is mean by ignition limit? Give ignition limit for SI engine.

Last Answer : Ignition Limit corresponds approximately to that mixture ratio, at lean & rich ends of the scale, where the heat released by spark is no longer sufficient to initiate combustion in the neighboring un-burnt mixture. ... 7:1 to 30:1 Actual Ignition limits for hydrocarbon fuels are 9:1 to 21:1

What is meant by surface ignition in SI engine?

Description : What is meant by surface ignition in SI engine? 

Last Answer : Surface ignition: Surface ignition is the ignition of the fuel-air mixture by a hot spot on the combustion chamber walls such as on overheated valve or spark plug or glowing combustion Chamber ... and start propagates across the chamber in an analogous manner to what occurs in normal knock.

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Description : List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Last Answer : Fuel distribution : Drawbacks 1. Mal-distribution of charge. 2. Inaccurate metering of charge. 3. Fuel atomization depends upon velocity of air in the venture. Drivability: Drawbacks 1 ... temperature compensation. 4) No compensation of Exhaust gas recirculation. 5) Backfiring may take place.

Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Description : Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Last Answer : Parameter SI engine CI engine Air-fuel ratio air-fuel ratio is 14.7:1 air-fuel ratio is 20:1 to 70:1  Power output  Power output is Less than CI engine due ... Knocking take place at the end of combustion. Knocking take place at beginning or start of the combustion. 

Enlist the measures of control detonation in SI engine.

Description : Enlist the measures of control detonation in SI engine. 

Last Answer : Detonation can be control by any or all of the following techniques: 1) Use of a fuel with high octane rating. 2) Enriching the air-fuel ratio. 3) Reducing peak cylinder pressure. 4) decreasing ... . 8) Retarding spark. 9) Water injection 10) Use of high octane fuel can eliminate detonation.

Discuss the drawbacks of carbureted SI engine on the base of, Air-fuel ratio, fuel consumption, power output, emission.

Description : Discuss the drawbacks of carbureted SI engine on the base of, Air-fuel ratio, fuel consumption, power output, emission. 

Last Answer : 1) Air-fuel ratio: - As in SI engine Air-fuel ratio varies from 8:1 to 18.5:1 i.e. from 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. Richer or leaner air-fuel ratio limit causes the engine to ... 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. So emission is more in SI engine.

State four properties of SI engine fuel.

Description : State four properties of SI engine fuel.

Last Answer : 1. It should mix readily with air and provide uniform manifold distribution. That is, it should easily vaporize. 2. It must be knock resistant. 3. It should not pre-ignite easily. 4. It should ... not form gum and varnish. OR 1. Volatility2. Knock Resistivity 3. Sulphur Content 4. Gum Content

LPG is used as an alternative fuel for SI engine. Justify your answer

Description : LPG is used as an alternative fuel for SI engine. Justify your answer

Last Answer : LPG is used as an alternative fuel for SI engine because of following advantages. 1. The exceptional advantages of LPG as an alternative engine fuel have been mainly from the simplicity of its ... plug is increased. 9. Fuel supply system can be easily modified by introducing a conversion kit.

Describe four properties of gasoline as a fuel for SI engine

Description : Describe four properties of gasoline as a fuel for SI engine

Last Answer : Volatility: volatility depend upon fractinal composition of fuel. Method of measuring volatility has been standardized by ASTM ( American society of Testing Materials) and the graohical representation ... gasoline to improve the gasoline stability during storage by inhibiting the formation of gums.

Draw neat sketch of pre-combustion chamber and name its parts.

Description : Draw neat sketch of pre-combustion chamber and name its parts.

Last Answer : Fig. Pre-combustion chamber

Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Description : Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Last Answer : Method to control NOx: The EGR system is used to reduce the amount of NOx in the exhaust. NOx production increases as the temperature inside the combustion chamber rises due to acceleration or heavy engine loads, ... (less than 10% of total) to be supplied into the incoming air: fuel mixture.  

Draw neat sketch of swirl type combustion chamber of IDI engine.

Description : Draw neat sketch of swirl type combustion chamber of IDI engine.

Last Answer : Fig. swirl type combustion chamber of IDI engine.

State four advantages of I head combustion chamber.

Description : State four advantages of I head combustion chamber. 

Last Answer : Advantages of I-Head combustion chamber: 1. Lower pumping losses and higher volumetric efficiency. 2. Lesser distance of flame travel therefore low octane requirement. 3. More uniform cooling of cylinder ... ratio and therefore less heat loss. 5. Easier to cast and hence lower casting cost.

Discuss in brief process of combustion in SI engines with a sketch.

Description : Discuss in brief process of combustion in SI engines with a sketch.

Last Answer : Combustion In S I Engine According to Ricardo, There are three stages of combustion in SI Engine as shown in figure above 1. Ignition lag stage 2. Flame propagation stage 3. After ... combustion is known as after burning. This generally happens when the rich mixture is supplied to engine. 

Explain Evaporative emission control system.

Description : Explain Evaporative emission control system.

Last Answer : EVAP system Operation: When the engine is running, stored fuel vapours in fuel tank are purged from the canister whenever the throttle has opened past the purge port and coolant temperature is above 54 °C. ... The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.   

Explain Delay Period in detail.

Description : Explain Delay Period in detail.

Last Answer : Delay period: Ignition delay period is the time period between start of injection and start of combustion, has a great influence on the correct optimization of a diesel engine. The knock phenomenon ... with air, and mixture rose in temperature. Pre-flame reactions occur during chemical delay  

Explain working of LPG kit with labeled block diagram.

Description : Explain working of LPG kit with labeled block diagram.

Last Answer : Working of LPG Kit: LPG Tank: It is used to store the LPG at 10 bar Filler Valve: It allows the LPG into the tank while feeling. Pressure Relief Valve: It is used to limit ... regulator Mixer / gas injection which flows the LPG into the combustion chamber  Block diagram:  

Explain engine design modification parameter to control emissions.

Description : Explain engine design modification parameter to control emissions.

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel ... tolerances and using special type of carburetors. This also includes fuel injection in manifold.  

Explain the working computer controlled EGR system.

Description : Explain the working computer controlled EGR system.

Last Answer : Exhaust Gas recirculation: EGR System is control by the ECM. A pressure sensor monitors the exhaust system pressure. The sensor signals this information of pressure to the ECM. The ECM sends the signal ... open and close the EGR valve. Thus it controls the amount of exhaust gas recalculated.

Explain the methods of fuel injection used EFI system.

Description : Explain the methods of fuel injection used EFI system.

Last Answer : Methods of fuel injection: 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection. 4. Continuous injection. 1. Simultaneous Injection: Injection of fuel ... of the fuel injection is determined by ECU depending upon load and speed. 

Explain the working of series hybrid vehicle.

Description : Explain the working of series hybrid vehicle.

Last Answer : Series-Hybrid vehicle In Series Hybrid vehicles, the Internal Combustion Engine (ICE) drives a generator, which charges the battery and supplies current to the electronically controlled motor. The electric motor ... have to be rated to the maximum power. It has low overall system efficiency.

Explain the pollutants from gasoline engine

Description : Explain the pollutants from gasoline engine

Last Answer : 1. Hydrocarbon (HC):-They play an important role in forming NO2 and O3 which are health and environmental hazard.  2. Carbon Monoxide (CO): CO is a highly poisonous gas that can cause dizziness, ... effect, NO2 is a very toxic gas and contributes to the formation of smog, ozone, and acid rain.

Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Description : Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Last Answer : i. Pour point: Pour point is the temperature below which the entire mass of fuel, solid or liquid together, freeze and thus cause flow of fuel impossible. Pour point is usually 5 to 10 °C below ... is the temperature at which the flash will sustain itself as a steady flame for at least five seconds.

With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Description : With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve where as the spring pressure tends to keep it open.(Fig a ... back seat sealing the inlet and crankcase is protected from the back fire.(Fig d).

List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Description : List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Last Answer : Answer: Two type of diesel smoke 1) Blue-white smoke 2) Black smoke Four cause of diesel smoke:- 1) Blue smoke is due to burning the droplets of lubricating oil in combustion ... because of worn piston rings & cylinder liners & water come in combustion chamber because cracked water jacket.

List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Description : List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Last Answer : Answer: Three sources of pollutant from gasoline engine:- 1) Carburettor losses 2) Crankcase blow-by 3) Engine exhaust emission Evaporative losses:-  1. Carburettor losses: occur due ... due to incomplete combustion, the exhaust gas also contains carbon monoxide, unburnt hydrocarbons (UBHC).

Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Description : Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Last Answer : Answer: Working of Variable Valve Timing and Electronic lift control (VTEC) system:- VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system ... 2) Maintenance cost is high 3) Very complex structure required complicated control system.

List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Description : List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Last Answer : Eight ways of reducing pollution:-  1) Optimize Ignition Advance 2) Use unleaded gasoline & Low sulphur diesel 3) Use leaner air fuel ratio 4) Use exhaust gas treatment devices ex Catalytic ... check valve. The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.

List out the methods for evaporation control and explain any one.

Description : List out the methods for evaporation control and explain any one.

Last Answer : Methods for evaporation control:- 1. Charcoal Canister System (for Fuel tank and carburetor float bowl emissions 2. Positive Crankcase Ventilation (PCV) System (for crankcase ... crankcase ventilation performance is optimized, while engine performance and drivability remains unaffected.

Explain VVT mechanism and state any two advantages of it.

Description : Explain VVT mechanism and state any two advantages of it.

Last Answer : Variable valve timing (VVT) is a system for varying the valve opening of an internal combustion engine. This allows the engine to deliver high power, but also to work tractably and efficiently at low power ... handling of engine valve. 5) It lowers the exhaust emission. 6) It increases torque. 

Explain Biodiesel fuel. Give any four applications.

Description : Explain Biodiesel fuel. Give any four applications.

Last Answer : Biodiesel diesel  Bio diesel is a vegetable oil or animal fat based diesel fuel. It consists of long chain alkyl esters. It is made chemically reacting liquids with an alcohol. i) It is a ... diesel with 20% biodiesel) 4.Generatore 5.Air craft engines 6.Heating oil in domestic commercial boiler

Explain the effect of positive crankcase ventilation (PCV) system on engine emission.

Description : Explain the effect of positive crankcase ventilation (PCV) system on engine emission. 

Last Answer : PCV system: The purpose of PCV system is to remove the harmful gases from the crankcase before damage occurs and combine them with the engine's normal incoming air: fuel mixture. ... is optimized, while engine performance and drivability remains unaffected positive crankcase ventilation

What is EGR? Explain with the help of block diagram.

Description : What is EGR? Explain with the help of block diagram.

Last Answer : Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed until the ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture

Explain any two engine modifications and two fuel modifications to control emission from gasoline engine.

Description : Explain any two engine modifications and two fuel modifications to control emission from gasoline engine. 

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air ... Fuel Volatility: Fuel volatility is compromise of high volatility and low volatility to control the pollution

Explain how VTEC is beneficial over VVT.

Description : Explain how VTEC is beneficial over VVT.

Last Answer : VTEC stands for Variable valve timing and electronic lift control. In VTEC, the valve timing and the valve lift is controlled using ECU to provide efficient breathing of engine and efficient performance of ... GDI is capable of using very lean mixture i.e. 65:1 while using VTEC Improve drivability