Draw neat sketch of pre-combustion chamber and name its parts.

Draw neat sketch of pre-combustion chamber and name its parts.
by

1 Answer

Answer :

image

Fig. Pre-combustion chamber

by

Related questions

Draw neat sketch of swirl type combustion chamber of IDI engine.

Description : Draw neat sketch of swirl type combustion chamber of IDI engine.

Last Answer : Fig. swirl type combustion chamber of IDI engine.

Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Description : Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Last Answer : Method to control NOx: The EGR system is used to reduce the amount of NOx in the exhaust. NOx production increases as the temperature inside the combustion chamber rises due to acceleration or heavy engine loads, ... (less than 10% of total) to be supplied into the incoming air: fuel mixture.  

State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Description : State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Last Answer : 1) T Head Type Combustion chambers 2) L Head Type Combustion chambers 3) F- Head combustion chamber 4) Over head valve or I head combustion chamber 5) Hemispherical combustion chamber 6) Bathtub ... - Head combustion chamber 4) Over head valve or I head combustion chamber

Sketch and Explain F-head combustion chamber.

Description : Sketch and Explain F-head combustion chamber.

Last Answer : In F-head combustion chamber one valve is in head and other in the block. This design is a compromise between L-head and I head combustion chambers. Advantages are : High volumetric ... This design is the complex mechanism for operation of valves and expensive special shaped piston. 

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Last Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

State four advantages of I head combustion chamber.

Description : State four advantages of I head combustion chamber. 

Last Answer : Advantages of I-Head combustion chamber: 1. Lower pumping losses and higher volumetric efficiency. 2. Lesser distance of flame travel therefore low octane requirement. 3. More uniform cooling of cylinder ... ratio and therefore less heat loss. 5. Easier to cast and hence lower casting cost.

With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Description : With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Last Answer : EDC: The ECU determines the correct quantity of the fuel to be injected based on the inputs and the data in the look up table. The fuel input depends on the rack position and thus ECU ... ECU can also protect the engine against overheating by regulating the maximum quantity of fuel delivered.

Explain the working of diesel engine glow plugs with neat sketch

Description : Explain the working of diesel engine glow plugs with neat sketch

Last Answer : Glow plug is an aid for cold starting of a C.I. engine. The self-ignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) should reach a temperature of ... plugs is automatically interrupted. But starting may be attempted again as soon as the driver wishes.   

Explain PFI system with neat sketch.

Description : Explain PFI system with neat sketch.

Last Answer : PFI system In the port injection arrangement, the injector is placed on the side of the intake manifold near the intake port. The injector sprays gasoline into the air, inside the intake manifold. The ... of gasoline and air then passes through the intake valve and enters into the cylinder.

Write neat sketch, describe MPFI system.

Description : Write neat sketch, describe MPFI system.

Last Answer : MPFI system In the port injection arrangement, the injectoe is placed on the side of the intake manifold near the intake port. The injector sprays gasoline into the air, inside the intake manifold. The ... manifold. If there are six cylinders, there will be six injectors as shown in figure.

Describe the working of EGR valve with neat sketch.

Description : Describe the working of EGR valve with neat sketch.

Last Answer : Answer: Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture

Describe with neat sketch operation of PCV valve under different engine operating condition to control/ emission

Description : Describe with neat sketch operation of PCV valve under different engine operating condition to control/ emission

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve whereas the spring pressure tends to keep it open.( ... at idle and low speed (c)High speed/Load operation (d)Preventing backfire during cranking  

Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Description : Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Last Answer : D-LMFI System: It is Manifold fuel injection system.In this type, the vacuum in the intake manifold and volume of air by its density are sensed in this type of MPFI system .As air enters into ... intake manifold , the air flow sensor measures the amount of air and sends information to ECU.

Describe the working of fuel injector with neat sketch

Description : Describe the working of fuel injector with neat sketch

Last Answer : Fuel Injector: The injector assembly consists of - i) a needle valve ii) a compression spring iii) a nozzle iv) an injector body When the fuel is supplied to lift the injection ... spring tension and hence the valve opening pressure is controlled by adjusting the screw provided at the top.

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Draw P-ⱷ diagram showing stages of combustion in SI engine.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

Explain the various stages of combustion in SI engines.

Description : Explain the various stages of combustion in SI engines.

Last Answer : The stages of combustion in SI engines Stage I:-Ignition Lag or Preparation Phase. Stage II: - Propagation of flame. Stage III: - After burning. 

List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Description : List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Last Answer : Eight ways of reducing pollution:-  1) Optimize Ignition Advance 2) Use unleaded gasoline & Low sulphur diesel 3) Use leaner air fuel ratio 4) Use exhaust gas treatment devices ex Catalytic ... check valve. The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.

List three methods of fuel injection. Describe sequential method with suitable sketch.

Description : List three methods of fuel injection. Describe sequential method with suitable sketch.

Last Answer : Methods of petrol injection 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection 4. Continuous injection.  Sequential Injection: Each injector ... to crank/ camshaft position and pulse width, can be optimized for each individual cylinder.

With the help of suitable sketch describe the working of pressure regulator.

Description : With the help of suitable sketch describe the working of pressure regulator.

Last Answer : Working of pressure regulator : The fuel pump provides more fuel than the maximum required by the engine. Fuel not used by the engine is returned to the fuel tank. The fuel rail supplies all injectors. The pressure ... between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

State input and output control functions of ECM. Describe the idle speed control with sketch.

Description : State input and output control functions of ECM. Describe the idle speed control with sketch. 

Last Answer : Inputs and outputs of Electronic Control Module The inputs of ECM 1. The Ignition (Engine Speed Sensor). 2. Temperature Sensor (Coolant Temperature). 3. Throttle Potentiometer (Intake ... through. The Idle speed control valve stepper motor allows 125 possible valve opening positions. 

Describe construction and working of TBI system with suitable sketch.

Description : Describe construction and working of TBI system with suitable sketch.

Last Answer : Construction and working of TBI system: Throttle Body Injection is an electronically controlled injection system in which an electronic fuel injector injects the fuel intermittently in to the intake manifold ... to calculate the triggering signals for the injectors and other system actuators.

With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Description : With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve where as the spring pressure tends to keep it open.(Fig a ... back seat sealing the inlet and crankcase is protected from the back fire.(Fig d).

Define: i) Detonation ii) Pre-ignition.

Description : Define: i) Detonation ii) Pre-ignition.

Last Answer : i) Detonation: - Detonation is auto-ignition of last part of homogeneous charge occurring near the end of combustion, before the flame front reaches it. In auto- ignition, the burning is ... sparking plug electrodes, exhaust valve head, metal corners in the combustion chamber, carbon deposits etc.

Define spark ignition, auto ignition, pre ignition, and surface ignition.

Description : Define spark ignition, auto ignition, pre ignition, and surface ignition. 

Last Answer : 1. Spark ignition: The term spark-ignition is ignition of charge (the air-fuel mixture) by a spark across electrodes of a spark plug.  2. Auto ignition: It is spontaneous ignition of ... locations and start propagates across the chamber in an analogous manner to what occurs in normal knock. 

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Description : Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Last Answer : Fundamental requirement:-The line diagram of CRDI shows that the system is controlled by ECU. The sensors in the system are used to feed the input in the ECU.ECU will provide the signal ... fuel injector, common rail, High pressure fuel pump, ECM/ECU, Pressure sensor, Rail pressure limiter. 

Draw a block diagram of CRDI system and describe its working.

Description : Draw a block diagram of CRDI system and describe its working.

Last Answer : Working of CRDI system: High pressure pump provides high pressure fuel to the common rail. The common rail stores the fuel and maintains a constant pressure in the common rail line (approximately 1500 bars.). ... rate can be modified by controlling the nozzle needle movement. OR

Draw the circuit diagram of glow plug and explain its operation.

Description : Draw the circuit diagram of glow plug and explain its operation.

Last Answer : Answer: Operation of glow plug: Glow plug is an aid for cold starting of a C.I. engine. The selfignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) ... is automatically interrupted. But starting may be attempted again as soon as the driver wishes. 

Draw a labeled block of LPG conversion kit. Describe its working.

Description : Draw a labeled block of LPG conversion kit. Describe its working.

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.

Draw block diagram for EDC type fuel pump in diesel engine.

Description : Draw block diagram for EDC type fuel pump in diesel engine.

Last Answer : Block diagram for EDC type fuel pump in diesel engine OR

Draw a labelled block diagram of CRDI system

Description : Draw a labelled block diagram of CRDI system

Last Answer : block diagram of CRDI system

Draw a neat sketch of prismatic compass and label its component parts

Description : Draw a neat sketch of prismatic compass and label its component parts

Last Answer : Sketch of prismatic compass and label its component parts

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Description : In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Last Answer : Answer: d Explanation: In pre-chamber and swirl type of combustion system pintle nozzle is used and not the other nozzles.

Draw a neat sketch of cross-section of an exogenous tree and label the parts.

Description : Draw a neat sketch of cross-section of an exogenous tree and label the parts. 

Last Answer : Cross-section of an exogenous tree:

Draw neat sketch showing various parts of die set.

Description : Draw neat sketch showing various parts of die set. 

Last Answer : Answer: 1. Stop 2.Sheet metal 3.Pilot 4.Blanking punch 5.Ram 6.Piercing punch 7.Stripper 8.die Fig. Progressive Die OR

Draw neat sketch of compound die, showing various parts of it.

Description : Draw neat sketch of compound die, showing various parts of it.

Last Answer : Answer:

Draw the neat sketch of fly press. Give the functions of important parts of it.

Description : Draw the neat sketch of fly press. Give the functions of important parts of it. 

Last Answer : Answer: OR Functions of important parts of Fly Press. 1. Ram : This is main operating part of the press which works directly during processing of a workpiece. Ram ... : A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press 

Draw neat sketch of wind turbine and name various parts in it.

Description : Draw neat sketch of wind turbine and name various parts in it.

Last Answer : Draw neat sketch of wind turbine and name various parts in it.

State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Description : State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Last Answer : Need of Differential in automobile: 1) When vehicle is taking turn outer wheel will have to travel greater distance as compared to inner wheel. 2). If the vehicle has a solid rear axle only and no other ... turn, at the same time keep the speed of rear wheel same when going straight ahead.

Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Description : Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Last Answer : Necessity of universal joint: ● A universal joint is used where two shafts are connected at an angle to transmit the torque. ● Universal joint is used to transmit motion at varying angles.

Draw a neat sketch of Transfer case arrangement. Label all the parts and state the application of transfer case in Automobiles.

Description : Draw a neat sketch of Transfer case arrangement. Label all the parts and state the application of transfer case in Automobiles. 

Last Answer : Working of transfer case: When the shifter-A is at the central position as shown in fig. here neither the gear G1and nor the gear G2 is connected to the input shaft, it is known as neutral ... in four wheel drive vehicle along with main gearbox to transmit torque and power to the rear axle. 

Draw a neat sketch of hydraulically operated clutch and label all parts.

Description : Draw a neat sketch of hydraulically operated clutch and label all parts.

Last Answer : hydraulically operated clutch

Explain hot chamber die casting process with neat sketch.

Description : Explain hot chamber die casting process with neat sketch.

Last Answer : Hot chamber die casting : In a hot chamber submerged plunger-type machine, the plunger operates in one end of a gooseneck casting which is submerged in the molten metal. With the plunger in ... . Heating is continued throughout the operation to keep the molten metal sufficiently liquid.

Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Description : Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Last Answer : • All of the above

Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Description : Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Last Answer : Answer: Working of Variable Valve Timing and Electronic lift control (VTEC) system:- VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system ... 2) Maintenance cost is high 3) Very complex structure required complicated control system.

List any four advantages of CRDI system and write its operation.

Description : List any four advantages of CRDI system and write its operation.

Last Answer : Advantages of CRDI System: 1. Deliver 25% more power and torque than the normal direct injection engine. 2. Lower levels of noise and vibration. 3. Lower emissions. 4. Lower ... activating solenoid valve, whereas the injection rate can be modified by controlling the nozzle needle movement. 

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.