Draw neat sketch of swirl type combustion chamber of IDI engine.

Draw neat sketch of swirl type combustion chamber of IDI engine.
by

1 Answer

Answer :

image

Fig. swirl type combustion chamber of IDI engine.

by

Related questions

Draw neat sketch of pre-combustion chamber and name its parts.

Description : Draw neat sketch of pre-combustion chamber and name its parts.

Last Answer : Fig. Pre-combustion chamber

State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Description : State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Last Answer : 1) T Head Type Combustion chambers 2) L Head Type Combustion chambers 3) F- Head combustion chamber 4) Over head valve or I head combustion chamber 5) Hemispherical combustion chamber 6) Bathtub ... - Head combustion chamber 4) Over head valve or I head combustion chamber

Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Description : Illustrate with neat sketch the process to control production of NOx in combustion chamber.

Last Answer : Method to control NOx: The EGR system is used to reduce the amount of NOx in the exhaust. NOx production increases as the temperature inside the combustion chamber rises due to acceleration or heavy engine loads, ... (less than 10% of total) to be supplied into the incoming air: fuel mixture.  

List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Last Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

Sketch and Explain F-head combustion chamber.

Description : Sketch and Explain F-head combustion chamber.

Last Answer : In F-head combustion chamber one valve is in head and other in the block. This design is a compromise between L-head and I head combustion chambers. Advantages are : High volumetric ... This design is the complex mechanism for operation of valves and expensive special shaped piston. 

Explain the working of diesel engine glow plugs with neat sketch

Description : Explain the working of diesel engine glow plugs with neat sketch

Last Answer : Glow plug is an aid for cold starting of a C.I. engine. The self-ignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) should reach a temperature of ... plugs is automatically interrupted. But starting may be attempted again as soon as the driver wishes.   

Describe with neat sketch operation of PCV valve under different engine operating condition to control/ emission

Description : Describe with neat sketch operation of PCV valve under different engine operating condition to control/ emission

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve whereas the spring pressure tends to keep it open.( ... at idle and low speed (c)High speed/Load operation (d)Preventing backfire during cranking  

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Draw P-ⱷ diagram showing stages of combustion in SI engine.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

State four advantages of I head combustion chamber.

Description : State four advantages of I head combustion chamber. 

Last Answer : Advantages of I-Head combustion chamber: 1. Lower pumping losses and higher volumetric efficiency. 2. Lesser distance of flame travel therefore low octane requirement. 3. More uniform cooling of cylinder ... ratio and therefore less heat loss. 5. Easier to cast and hence lower casting cost.

In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Description : In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Last Answer : Answer: d Explanation: In pre-chamber and swirl type of combustion system pintle nozzle is used and not the other nozzles.

With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Description : With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Last Answer : EDC: The ECU determines the correct quantity of the fuel to be injected based on the inputs and the data in the look up table. The fuel input depends on the rack position and thus ECU ... ECU can also protect the engine against overheating by regulating the maximum quantity of fuel delivered.

Explain PFI system with neat sketch.

Description : Explain PFI system with neat sketch.

Last Answer : PFI system In the port injection arrangement, the injector is placed on the side of the intake manifold near the intake port. The injector sprays gasoline into the air, inside the intake manifold. The ... of gasoline and air then passes through the intake valve and enters into the cylinder.

Write neat sketch, describe MPFI system.

Description : Write neat sketch, describe MPFI system.

Last Answer : MPFI system In the port injection arrangement, the injectoe is placed on the side of the intake manifold near the intake port. The injector sprays gasoline into the air, inside the intake manifold. The ... manifold. If there are six cylinders, there will be six injectors as shown in figure.

Describe the working of EGR valve with neat sketch.

Description : Describe the working of EGR valve with neat sketch.

Last Answer : Answer: Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture

Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Description : Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Last Answer : D-LMFI System: It is Manifold fuel injection system.In this type, the vacuum in the intake manifold and volume of air by its density are sensed in this type of MPFI system .As air enters into ... intake manifold , the air flow sensor measures the amount of air and sends information to ECU.

Describe the working of fuel injector with neat sketch

Description : Describe the working of fuel injector with neat sketch

Last Answer : Fuel Injector: The injector assembly consists of - i) a needle valve ii) a compression spring iii) a nozzle iv) an injector body When the fuel is supplied to lift the injection ... spring tension and hence the valve opening pressure is controlled by adjusting the screw provided at the top.

Draw block diagram for EDC type fuel pump in diesel engine.

Description : Draw block diagram for EDC type fuel pump in diesel engine.

Last Answer : Block diagram for EDC type fuel pump in diesel engine OR

Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Description : Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Last Answer : Fundamental requirement:-The line diagram of CRDI shows that the system is controlled by ECU. The sensors in the system are used to feed the input in the ECU.ECU will provide the signal ... fuel injector, common rail, High pressure fuel pump, ECM/ECU, Pressure sensor, Rail pressure limiter. 

Explain the various stages of combustion in SI engines.

Description : Explain the various stages of combustion in SI engines.

Last Answer : The stages of combustion in SI engines Stage I:-Ignition Lag or Preparation Phase. Stage II: - Propagation of flame. Stage III: - After burning. 

List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Description : List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Last Answer : Eight ways of reducing pollution:-  1) Optimize Ignition Advance 2) Use unleaded gasoline & Low sulphur diesel 3) Use leaner air fuel ratio 4) Use exhaust gas treatment devices ex Catalytic ... check valve. The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.

List three methods of fuel injection. Describe sequential method with suitable sketch.

Description : List three methods of fuel injection. Describe sequential method with suitable sketch.

Last Answer : Methods of petrol injection 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection 4. Continuous injection.  Sequential Injection: Each injector ... to crank/ camshaft position and pulse width, can be optimized for each individual cylinder.

With the help of suitable sketch describe the working of pressure regulator.

Description : With the help of suitable sketch describe the working of pressure regulator.

Last Answer : Working of pressure regulator : The fuel pump provides more fuel than the maximum required by the engine. Fuel not used by the engine is returned to the fuel tank. The fuel rail supplies all injectors. The pressure ... between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

State input and output control functions of ECM. Describe the idle speed control with sketch.

Description : State input and output control functions of ECM. Describe the idle speed control with sketch. 

Last Answer : Inputs and outputs of Electronic Control Module The inputs of ECM 1. The Ignition (Engine Speed Sensor). 2. Temperature Sensor (Coolant Temperature). 3. Throttle Potentiometer (Intake ... through. The Idle speed control valve stepper motor allows 125 possible valve opening positions. 

Describe construction and working of TBI system with suitable sketch.

Description : Describe construction and working of TBI system with suitable sketch.

Last Answer : Construction and working of TBI system: Throttle Body Injection is an electronically controlled injection system in which an electronic fuel injector injects the fuel intermittently in to the intake manifold ... to calculate the triggering signals for the injectors and other system actuators.

With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Description : With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve where as the spring pressure tends to keep it open.(Fig a ... back seat sealing the inlet and crankcase is protected from the back fire.(Fig d).

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

Draw a block diagram of CRDI system and describe its working.

Description : Draw a block diagram of CRDI system and describe its working.

Last Answer : Working of CRDI system: High pressure pump provides high pressure fuel to the common rail. The common rail stores the fuel and maintains a constant pressure in the common rail line (approximately 1500 bars.). ... rate can be modified by controlling the nozzle needle movement. OR

Draw the circuit diagram of glow plug and explain its operation.

Description : Draw the circuit diagram of glow plug and explain its operation.

Last Answer : Answer: Operation of glow plug: Glow plug is an aid for cold starting of a C.I. engine. The selfignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) ... is automatically interrupted. But starting may be attempted again as soon as the driver wishes. 

Draw a labeled block of LPG conversion kit. Describe its working.

Description : Draw a labeled block of LPG conversion kit. Describe its working.

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.

Draw a labelled block diagram of CRDI system

Description : Draw a labelled block diagram of CRDI system

Last Answer : block diagram of CRDI system

State four drawbacks of carbureted SI engine

Description : State four drawbacks of carbureted SI engine 

Last Answer : Drawbacks of carbureted SI engine: 1) No altitude compensation. 2) Mal-distribution of charge. 3) Variation in air: fuel ratio. 4) Inaccurate metering of charge. 5) Does not meet emission ... in poor efficiency. 10) Backfiring may take place. 11) Carburetor Icing may take place.

Explain engine design modification parameter to control emissions.

Description : Explain engine design modification parameter to control emissions.

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel ... tolerances and using special type of carburetors. This also includes fuel injection in manifold.  

List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Description : List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Last Answer : 1 Petrol 2. Diesel 3. LPG 4. CNG 5.Hydrogen 6.Alcohol 7.Bio diesel Properties biodiesel  i) It is a renewable substitute fuel for petroleum diesel. ii) It has lower exhaust ... diesel vi) It is an environmentally friendly fuel that an be used in any diesel engine without modification.

Explain the pollutants from gasoline engine

Description : Explain the pollutants from gasoline engine

Last Answer : 1. Hydrocarbon (HC):-They play an important role in forming NO2 and O3 which are health and environmental hazard.  2. Carbon Monoxide (CO): CO is a highly poisonous gas that can cause dizziness, ... effect, NO2 is a very toxic gas and contributes to the formation of smog, ozone, and acid rain.

List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Description : List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Last Answer : Answer: Three sources of pollutant from gasoline engine:- 1) Carburettor losses 2) Crankcase blow-by 3) Engine exhaust emission Evaporative losses:-  1. Carburettor losses: occur due ... due to incomplete combustion, the exhaust gas also contains carbon monoxide, unburnt hydrocarbons (UBHC).

Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Description : Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Last Answer : Drawbacks of carbureted (SI) Engine. Parameter Drawbacks Emission Does not meet emission Norms Fuel consumption Due to absence of throttling specific fuel consumption is ... distribution of charge. Fuel distribution for each cylinder is not equal for multi cylinder engine.

Compare carbureted engine with MPFI engine

Description : Compare carbureted engine with MPFI engine

Last Answer : Sr.  Carbureted fuel system Electronic fuel injection system 1 Mal-distribution of charge.  Uniform distribution of charge.  2 Due to resistance in intake manifold volumetric ... is take place inside the manifold. Fuel being injected into or close to the cylinder. 

What is mean by ignition limit? Give ignition limit for SI engine.

Description : What is mean by ignition limit? Give ignition limit for SI engine.

Last Answer : Ignition Limit corresponds approximately to that mixture ratio, at lean & rich ends of the scale, where the heat released by spark is no longer sufficient to initiate combustion in the neighboring un-burnt mixture. ... 7:1 to 30:1 Actual Ignition limits for hydrocarbon fuels are 9:1 to 21:1

List down the pollutants from gasoline engine and diesel engine.

Description : List down the pollutants from gasoline engine and diesel engine.

Last Answer : Pollutants from gasoline engine:- 1. Hydrocarbons. 2. Carbon Monoxide. 3. Carbon dioxide. 4. Oxides of Nitrogen. Pollutants from diesel engine:- 1. Hydrocarbons 2. Carbon Monoxide. 3. Carbon dioxide. 4. Oxides of Nitrogen. 5. Particulate matters.

How gasoline engine emission is controlled by engine design modification and treatment of exhaust gas?

Description : How gasoline engine emission is controlled by engine design modification and treatment of exhaust gas?

Last Answer : Methods used for controlling of gasoline engine emission by engine design modification are:- 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel mixtures ... ) to open and close the EGR valve. Thus it controls the amount of exhaust gas recalculated.

State the difference between turbocharger & VGT used in diesel engine.

Description : State the difference between turbocharger & VGT used in diesel engine.

Last Answer : Difference between turbocharger and VGT Sr. No. Parameter Turbocharger VGT 1 Fuel efficiency Lower fuel efficiency as compared to VGT Improved fuel efficiency by20% 2 ... required. 6 Engine response Sluggish response at low speeds Quick responsive engine

What is meant by surface ignition in SI engine?

Description : What is meant by surface ignition in SI engine? 

Last Answer : Surface ignition: Surface ignition is the ignition of the fuel-air mixture by a hot spot on the combustion chamber walls such as on overheated valve or spark plug or glowing combustion Chamber ... and start propagates across the chamber in an analogous manner to what occurs in normal knock.

Why pressure regulator is required in fuel supply system of EFI system engine?

Description : Why pressure regulator is required in fuel supply system of EFI system engine? 

Last Answer : 1. In low pressure common rail systems (EFI) that do not require high capacity fuel flow where the fuel injector is mounted on a intake manifold port runner on engine displacing less than 2.0 liters. ... differential pressure between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

List down the effect of detonation on S I engine.

Description : List down the effect of detonation on S I engine.

Last Answer : 1. Noise and roughness: Mild knock is seldom audible and is not harmful. When intensity of knock increases a loud pulsating noise is produced due to development of a pressure wave. The ... and combustion chamber wall and this overheating leads to ignite the charge before the passage of spark

Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Description : Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Last Answer : Sr. No. Carburetted engine Electronic Fuel Injection (EFI) engine 1 Fuel atomization depends upon velocity of air in the venturi. Atomization of fuel is independent of cranking ... occurs in carbureted engine. Equal quantity of fuel is supplied to port for each cylinder

List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Description : List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Last Answer : Fuel distribution : Drawbacks 1. Mal-distribution of charge. 2. Inaccurate metering of charge. 3. Fuel atomization depends upon velocity of air in the venture. Drivability: Drawbacks 1 ... temperature compensation. 4) No compensation of Exhaust gas recirculation. 5) Backfiring may take place.

Explain the effect of positive crankcase ventilation (PCV) system on engine emission.

Description : Explain the effect of positive crankcase ventilation (PCV) system on engine emission. 

Last Answer : PCV system: The purpose of PCV system is to remove the harmful gases from the crankcase before damage occurs and combine them with the engine's normal incoming air: fuel mixture. ... is optimized, while engine performance and drivability remains unaffected positive crankcase ventilation

Explain any two engine modifications and two fuel modifications to control emission from gasoline engine.

Description : Explain any two engine modifications and two fuel modifications to control emission from gasoline engine. 

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air ... Fuel Volatility: Fuel volatility is compromise of high volatility and low volatility to control the pollution