Description : What is the importance of wire splices?
Last Answer : Splicing a method to connect two wires. If the slicing is notcorrect, it may lead to localized heating, burn out, break in thecircuit, disconnection of the two wires.
Description : How many types of splices and what are they ?
Last Answer : Two types. E.g. a. Straight line splices , b. Interlock splices.
Description : What is the insertion loss of connector-type splices for a single mode fiber optics? a. 0.51dB b. 0.31dB c. 0.49dB d. 0.38dB
Last Answer : d. 0.38dB
Description : What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db
Last Answer : D. 0.38 db
Description : Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB
Last Answer : D. 0.38 dB
Description : A re-planning agent uses execution monitoring and splices in repairs as needed. a) True b) False
Last Answer : a) True
Description : Lapped splices in tensile reinforcement are generally not used for bars of size larger than (A) 18 mm diameter (B) 24 mm diameter (C) 30 mm diameter (D) 36 mm diameter
Last Answer : Answer: Option D
Description : Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web ... are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4
Last Answer : (a) 1 and 3
Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?
Last Answer : 60-percent tin and 40-percent lead (60/40 solder).
Description : Why are preinsulated terminal lugs and splices color coded?
Last Answer : To identify wire sizes they are to be used on.
Description : What tools should be used to install large aluminum terminal lugs and splices?
Last Answer : Power-operated crimping tools.
Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?
Last Answer : Spaghetti or heat-shrinkable tubing.
Description : Why are splices staggered on multiconductor cables?
Last Answer : To prevent the joint from being bulky.
Description : Loss comparisons between fusion splices an mechanical splices ∙ A. 1:10 ∙ B. 10:1 ∙ C. 20:1 ∙ D. 1:20
Last Answer : A. 1:10
Description : What is the insertion loss of connector-type splices for a single mode fiber optics? ∙ a. 0.51 dB ∙ b. 0.31 dB ∙ c. 0.49 dB ∙ d. 0.38 dB
Last Answer : d. 0.38 dB
Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above
Last Answer : c) all the rivets should be renewed.*
Description : Describe the importance of three wire and four wire configuration for RTD with suitable circuit diagram.
Last Answer : Three wire RTD: Four wire RTD: Three wire configurations is used to help the circuit compensate for lead wire resistance, and thus provide a truer indication of the measured ... the leads. To get the optimum performance, it is generally best to specify the RTD configuration.