Why are we sometimes short of water of our taps?

1 Answer

Answer :

Feel Free to Answer

Related questions

Description : You have accidently left out the plug and are attempting to fill the bath with both taps full on. The hot tap takes 6 minutes to fill the bath. The cold tap takes 2 minutes and the water empties through the plug hole in 4 minutes.In how many minutes will the bath be filled? -Riddles

Last Answer : 2 minutes and 24 seconds.

Description : Two taps P and Q can fill a cistern in 24 min and 32 min respectively. Both the taps are opened together for a certain time but due to some obstruction the flow of water was restricted to 7/4 of full flow in tap P and ... How long was it before the full flow. A) 8 min B) 3 min C) 5.6 min D) 4.5 min

Last Answer : D Let the obstruction remain for X min.  Hence, Part of cistern filled in X min + part of cistern filled in 6 min = full cistern [(7X/4*24)+(5X/3*32)]+[(6/24)+(6/32)] = 1 (12X/96)+(7/16) = 1 12x/96=9/16 Thus, X = 4.5 min.

Description : A water cistern is two-fifth full. Tap A can fill a cistern in 20 mins and tap B can empty it in 12mins. If both the taps are open, how long will take to empty or fill the cistern completey? A) 10 mins B) 12mins C) 14mins D) 16 mins

Last Answer : B Clearly tap B is faster than the Tap A and so, the cistern will be emptied Part to be emptied = 2/5 Part emptied by (A+B) in 1 min = (1/12 – 1/20) = 5-3/60 = 2/60 =>1/30 Therefore 1/30 : 2/5 :: 1;x x= 1*2/5 *30/1 = 12mins so the tank will be emptied in 12mins.

Last Answer : TAPS - Tarapur Atomic Power Station

Description : An auto transformer is preferred over an ordinary two winding transformer due to: a) Safety of operation b) Availability of taps on secondary c) Copper savings d) All the above

Last Answer : Ans: C

Description : The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

Description : The turns ratio of transformer 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Last Answer : Answer: A

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Last Answer : Answer: A

Description : The turns ratio of device 'A' shown in the illustration is four to one and all the taps are equally spaced. If 120 volts were applied between 'X1' and 'X2', what would be indicated across 'H1' and 'H4'? EL-0082 A. 30 volts B. 120 volts C. 480 volts D. 1440 volts

Last Answer : Answer: D

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are equally spaced. If 440 volts were applied between 'H1' and 'H4', what would appear across 'X1' and 'X4'? EL-0082 A. 110 volts B. 220 volts C. 440 volts D. 1760 volts

Last Answer : Answer: A

Description : What are taps and when are they used?

Last Answer : A. Taps are provided on some transformers on the high voltage winding to correct for high or low voltage conditions, and still deliver full rated output voltages at the secondary terminals. The standard ASA ... taps are ANFC (above normal full capacity) and BNFC (below normal full capacity).

Description : What is the purpose of providing Taps in transformer and where these are provided?

Last Answer : In order to attain the required voltage, taps are provided, normally at high voltages side(low current).

Description : A tank can be filled by a tap in 6 hours and emptied by an outlet pipe in 8 hours. How long will it take to fill the cistern if both the taps are opened together? 1. 24 hours 2. 22 hours 3. 21 hours 4. 18 hours 5. 20 hours

Last Answer : 1;

Description : Number of taps on platform as per norms for recommended level of facilities (a) One for every coach (b) One for alternate coach* (c) One every 200 metres distance (d) At the discretion of DRM

Last Answer : (b) One for alternate coach*

Description : Number of taps to be provided on ‘A’ category stations on each platform as per norms of minimum essential facilities are (a) 20 taps (b) 15 taps (c) 12 taps* (d) One taps for each bogie

Last Answer : (c) 12 taps*

Description : Numbers of taps on each platform of ‘C’ category station as per norms of minimum essential facility criteria are (a) 6* (b) 8 (c) 12 (d) 15

Last Answer : (a) 6*

Description : Numbers of taps on each platform of ‘B’ category station as per norms of minimum essential facility criteria are (a) 6 (b) 8 (c) 12* (d) 15

Last Answer : (c) 12*

Description : Numbers of taps on each platform of ‘A’ category station as per norms of minimum essential facility criteria are (a) 6 (b) 8 (c) 12 (d) 15*

Last Answer : d) 15*

Description : What are taps and when are they used?

Last Answer : Taps are provided on some transformers on the high voltage winding to correct for high or low voltage conditions, and still deliver full rated output voltages at the secondary terminals. Standard tap arrangements ... are ANFC (above normal full capacity) and BNFC (below normal full capacity).

Description : Two taps can fill a bunker in 40 and 48 mins respectively and a waste tap can empty 6 gallons per minute. All the 3 taps working together can fill the bunker in 30 mind. The capacity of the bunker is. A) 480 B) 480 C) 680 D) 780 

Last Answer : A Work done by the waste tap in 1 min = 1/30 – (1/40 + 1/48) = 8 – (6+5)/240 = 8-11/240 = -3/240 = -1/80 (negative sign means emptying) Volume of 1/80 part = 60 gallons Volume of whole = (6*80) = 480 gallons

Description : Two taps P and Q can separately fill a tank in 120mins and 150 mins respectively. There is a 3rd tap in the bottom of the tank to empty it. If all of the 3 taps are simultaneously opened, then the tank is full ... . In how much time the 3rd pipe alone can empty the tank? A) 100 B) 200 C) 300 D) 400

Last Answer : B Work done by the 3 tap in 1 min = 1/100 – ( 1/120 + 1/150) = 1/100 – (5+4/600) =1/100 – 9/600 =6-9/600 = - 3/600 = - 1/200(negative signs mean empting) Therefore the 3rd tap alone can empty the tank in 200 mins

Description : Two taps A and B are opened together to fill a tank. Both the taps fill the tank in time x If B separately took 25 minutes more time than x to fill the tank and B took 49 minutes more time than x ... the tank, then find out the value of x? A) 48 minutes B) 24 minutes C) 54 minutes D) 35 minutes

Last Answer : D Time is taken to fill the tank by both taps x = √a*b x = √25*49 => 5*7 => 35

Description : Two taps M and N can alone fill a tank in 80 minutes and 120 minutes respectively. But due to a leakage of tank, it took 12 more minutes to fill the tank. In how many hours, the leak can alone empty the full tank? A) 240 B) 230 C) 248 D) 256

Last Answer : A A and B can fill tank in (1/80 + 1/120) = 1/48 so 48minutes But it took 12 more minutes, this means the tank got full in 48+12= 60 minutes So (1/80 + 1/120 – 1/x) = 1/60 1/X=1/80+1/120-1/60 Solve, x = 240

Description : Taps P, Q and R can fill a tank in 3, 4 and 5 hours respectively. If all the taps are opened together and after 30 minutes taps Q and R are turned off, find the total time in which the tank is full. A) 2(3/8)hrs B) 1(1/7)hrs C) 2(13/40)hrs D) 3(13/43)hrs

Last Answer : C In 1 hr P, Q, R = 1/3+1/4+1/5 = 20+15+12/60 = 47/60 Filled in 30m = 47/120 Remaining = 1-47/120 =73/120 Tap P = 3*73/120= 219/120 Total = 219/120+1/2 =219+60 /120= 279/120= 2 13/40 hrs

Description : A tank is filled by 3 taps K, L and M with uniform flow. The second tap L takes 3 times the time taken by K to fill the tank, while M takes two times the time taken by L to fill the tank. If all ... hours, find the time required by tap K alone to fill the tank. A) 10hrs B) 21hrs C) 14hrs D) 22hrs

Last Answer : B 1/x + 1/ (3x) + (1/6x) = 1/14 9/6x= 1/14 6x/9 = 14 6x=126 X=126/6 X=21

Description : One tap can fill a cistern four times as fast as another tap. If together the two taps can fill the cistern in 48 mins then the slower tap alone will be able to fill the cisterns. A) 1hr B) 2hr C) 3hr D) 4hr

Last Answer : D Let the slower tap alone fill the cistern in x mins Then faster tap will fill it in x/4 mins Therefore 1/x +4/x = 1/48 5/x = 1/48 X = 48*5 x = 240 mins x = 4 hrs.

Description : Tap 1 can fill a tank in 10 hrs , tap 2 in 20 hrs and tap 3 in 60 hrs. if all the taps are open, in how many hour will the tank be filled? A) 3 hrs B) 5 hrs C) 7hrs D) 6 hrs

Last Answer : D Net part filled in 1 hr = 1/10 + 1/20 + 1/60 = 6 + 3 + 1/60 = 10/60 = 1/6 Therefore all the 3 taps together fill tank in 6 hrs

Description : A tank can be filled by a tap in 8 hrs while it can be emptied by another tap in 18 hrs. if both the taps are opened simultaneously, then after how much time will the cistern get filled? A) 14hrs 24mins B) 14 hrs 12 mins C) 14hrs 56 mins D) 14hrs 30mins

Last Answer : A Net part filled in 1hr = (1/8 – 1/18) = 9 – 4/72 = 5/72 Therefore the tank will be filled in 72/5 hrs i.e., 14 hrs 24mins

Description : Two tap can fill a dumper in 7 hrs and 8 hrs respectively. The taps are opened simultaneously and it is found that due to leakage in the bottom it took 16 mins more to fill the dumper. When the dumper is full, in what time will the leak empty it? A) 56hrs B) 56hrs C) 46hrs D) 36hrs

Last Answer : A Work done by 2 taps in 1 hr = (1/7 + 1/8) = 15/56 Time taken by these taps to fill the dumper = 56/15 hrs =3 hrs 44 mins Due to leakage, time taken = 3 hrs +44mins+16 mins =4hrs Work done by (2 ... the leak in 1 hr = (15/56 - ¼) =15 - 4/56 =1/56 Leak will empty the full cistern in 56 hrs.

Description : Three taps P,Q,R can fill a bunker in 3 hrs. After working at it together for 1 hr, R is closed and P,Q can fill the remaining part in 3 hrs. The number of hrs taken by R alone to fill the bunker. A) 9hrs B) 7hrs C) 11hrs D) 5hrs

Last Answer : A  Part filled in 1 hr = 1/3  Remaining part = 1 – 1/3 = 2/3  (P + Q)’s 3 hours work = 2/3  (P+Q)’s 1 hour work = 2/9  R’s 1 hr work = [(P+Q+R)’s 1 hr work – (P+Q)’s 1 hr work]  = 1/3 – 2/9 = 3-2/9 = 1/9  R alone can fill the tank in 9 hours.

Description : One tap can fill a tank thrice as fast as another tap. If together the two taps can fill the tank in 12 minutes, then the slower tap alone will be able to fill the tank in A) 30min B) 33min C) 32min D) 35min

Last Answer : C (1/x)+(1/3x)=(1/12) 3+1/3x = 4/3x = 1/12 3x = 48 x=32mins

Description : Two taps can fill a tank in 4 hours and 5 hours .If two taps are operate simultaneously, In how much time will the tank be filled ? A) 4hrs 18min B) 10min 12min C) 2hrs 13min D) 12hrs 10min

Last Answer : C 1/(A+B) =1/4 + 1/5 = (5+4)/20 = 9/20 =>20/9=2hrs 13min to filled the tank

Description : When low flying aircraft passes overhead, we sometimes notice a slight disturbance on our TV screen. Why is it so?

Last Answer : Ans: a low flying aircraft reflects TV signal. Due to the interference between the direct signal and the reflected signal, there is disturbance on the TV screen.

Description : Which statement is a correct view of psychological egoism? A. While our own interests are important, they make sometimes have to give way to the interests of others. B. Psychological egoism ... D. Psychological egoism does not claim to provide an accurate descriptive account of human behavior.

Last Answer : C. If psychological egoism is true, we should abandon ethics.

Description : My friend, who is a druggie and looks kind of scary at first sight, but is actuallly very nice, sometimes has anger issues and a short temper, will he be fine in the future? Or do you think he will be very violent to be around and abusive?

Last Answer : Well.. you can never know for sure… as long as he isn’t physically abusive, because everyone can have anger issues. He could work it out, tell him about how scary he is during when he lashes out, and maybe he could change.

Description : I have three colors, each with a different meaning. When I'm old they become dull, but when I'm new they are gleaming. I help keep people safe, but sometimes they hate me. You won't see me in a forest, ... get happy or sad, and when you guess what I am, you will be very glad. What am I? -Riddles

Last Answer : A Stoplight.

Description : I can be short and sometimes hot. When displayed, I rarely impress.What am I? -Riddles

Last Answer : I am your temper.

Description : The short-term focus on company finances in sometimes known as- (a) Glaucoma management (b) Retina management (c) Myopic management (d) None of these

Last Answer : C. MYOPIC MANAGEMENT

Description : Yay! Seelix with her red red or not, sometimes hair, wonderful points of view and often silly attitudes has appealing worked her way up to the mansion! All glasses raised to one of our favorite Canucks?

Last Answer : All right! Congratulations!

Description : Why do our ears suddenly ring sometimes?

Last Answer : Sudden barometric pressure changes. Or you have a brain tumor.

Description : Why do our ears turn red sometimes?

Last Answer : You have good blood flow.

Description : What type of pronoun is bolded in the following sentence The truck which sometimes stalls belongs to our neighbor?

Last Answer : The pronoun which is a relative pronoun that introduces the relative clause 'which sometimes stalls'.A relative clause relates information about its antecedent, 'truck'.The pronoun 'which' takes the place of the ... 'our' describes the noun 'neighbor' as of the speaker and one or more other people.

Description : What type of pronoun is bolded in the following sentence The truck which sometimes stalls belongs to our neighbor?

Last Answer : The pronoun which is a relative pronoun that introduces the relative clause 'which sometimes stalls'.A relative clause relates information about its antecedent, 'truck'.The pronoun 'which' takes the place of the ... 'our' describes the noun 'neighbor' as of the speaker and one or more other people.