What type of fuel does an f-16 jet use?

What type of fuel does an f-16 jet use?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

Israeli F-16 fighter jet has been shot down by Syrian military on: (a) 11th feb,2018(b) 9th feb,2018 (c) 10th feb,2018 (d) None of These

Description : Israeli F-16 fighter jet has been shot down by Syrian military on: (a) 11th feb,2018 (b) 9th feb,2018 (c) 10th feb,2018 (d) None of These

Last Answer : (c) 10th feb,2018

Do jet planes (757, for example) use more or less fuel in cold weather?

Description : Do jet planes (757, for example) use more or less fuel in cold weather?

Last Answer : I have no certain knowledge, but I'll offer a hypothesis: I would expect that the plane's fuel consumption at takeoff and landing (can't forget that landing also requires fuel) in cold weather ... seems to me that the plane's wing surfaces would be more efficient then, leading to lower consumption.

Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Description : Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Last Answer : C. ion propulsion system

Which purified oil does Aviation fuel for jet aeroplanes consist? -General Knowledge

Description : Which purified oil does Aviation fuel for jet aeroplanes consist? -General Knowledge

Last Answer : The answer is 'Kerosene'

Which purified oil does Aviation fuel for jet aeroplanes consist? -General Knowledge

Description : Which purified oil does Aviation fuel for jet aeroplanes consist? -General Knowledge

Last Answer : answer:

Which purified oil does Aviation fuel for jet aeroplanes consist?

Description : Which purified oil does Aviation fuel for jet aeroplanes consist?

Last Answer : – Kerosene

In a carburetor the level of the fuel in the float chamber as compared to the level of the main jet in the venture is A. lower B. same C. higher D. same or higher

Description : In a carburetor the level of the fuel in the float chamber as compared to the level of the main jet in the venture is A. lower B. same C. higher D. same or higher

Last Answer : ANSWER : A

Which purified oil does Aviation fuel for jet aeroplanes consist?

Description : Which purified oil does Aviation fuel for jet aeroplanes consist?

Last Answer : Kerosene

Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Description : Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Last Answer : B. ion propulsion system

Which of the following is the most important property for a jet fuel? (A) Cloud point (B) Pour point (C) Colour (D) Freezing point

Description : Which of the following is the most important property for a jet fuel? (A) Cloud point (B) Pour point (C) Colour (D) Freezing point

Last Answer : (D) Freezing point

The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin

Description : The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin

Last Answer : (B) Freezing point

__________ is used as jet engine fuel. (A) Petrol (B) Diesel(C) Kerosene(D) LPG

Description : __________ is used as jet engine fuel. (A) Petrol (B) Diesel (C) Kerosene (D) LPG

Last Answer : (C) Kerosene

Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Description : Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Last Answer : Option C

How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Description : How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Last Answer : b. By controlling the fuel flow

How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Description : How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Last Answer : b. By controlling the fuel flow

What household heating fuel also powers jet planes?

Description : What household heating fuel also powers jet planes? 

Last Answer : ANSWER: KEROSENE

Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Description : Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Last Answer : Fuel Metering in inline type fuel injection pump: The position of the plunger in the fuel injection pump can be varied by means of a control rod having a rack and pinion arrangement. By operating ... (vi) shows that no fuel is being supplied to the injector; i. e. the engine has stopped.

a) Doping b) Immunization c) Pasteurization d) Modulation e) Catabolism f) Reprocessing of reactor fuel

Description : a) Doping b) Immunization c) Pasteurization d) Modulation e) Catabolism f) Reprocessing of reactor fuel

Last Answer : a) Doping: is adding impurities to semiconductor materials in order to change their electrical characteristics. b) Immunization: Also called vaccination or inoculation, a method of stimulating resistance in ... recovered plutonium-239 may be used in place of some uranium-235 in new fuel elements.

Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Last Answer : (A) Propane and acetylene

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Last Answer : D) B.F gas and coke oven gas

I have a vehicle that came standard with 16" wheels but now has older 15" wheels. What if any difference will be in fuel economy because of this?

Description : I have a vehicle that came standard with 16" wheels but now has older 15" wheels. What if any difference will be in fuel economy because of this?

Last Answer : You should be fine. If I remember correctly + or – 3% for tires. But if your not sure go to a tire shop and ask them.

What is the fuel mix ratio for a 1985 poulan 16 chainsaw?

Description : What is the fuel mix ratio for a 1985 poulan 16 chainsaw?

Last Answer : Need answer

The stoichiometric air fuel ration for petrol is 15:1 . What is the air fuel ratio required for maximum power? (a) 16:1 – 18:1 (b) 15:1 (c) 12:1 – 14:1 (d) 9:1 – 11:1

Description : The stoichiometric air fuel ration for petrol is 15:1 . What is the air fuel ratio required for maximum power? (a) 16:1 – 18:1 (b) 15:1 (c) 12:1 – 14:1 (d) 9:1 – 11:1

Last Answer : Ans :c

Pick out the wrong statement: (A) Carburetted water gas is also called blue gas (B) Coals are divided in four species according to their carbon content in Seylor's classification (C) Carbonisation time in a by-product coke oven is about 16 hours (D) Gross and net calorific value of a fuel is the same, if it does not contain hydrogen or hydrocarbons

Description : Pick out the wrong statement: (A) Carburetted water gas is also called blue gas (B) Coals are divided in four species according to their carbon content in Seylor's classification (C) Carbonisation time ... and net calorific value of a fuel is the same, if it does not contain hydrogen or hydrocarbons

Last Answer : (A) Carburetted water gas is also called blue gas

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm

What is the axis of symmetry of f=x^2-16?

Description : What is the axis of symmetry of f=x^2-16?

Last Answer : 18

The diagram given below [Fig. 16.18] shows how things get to and from the liver. They are labelled as A, B, C, D, E and F. Which one of the following

Description : The diagram given below [Fig. 16.18] shows how things get to and from the liver. They are labelled as A, B, C, D, E and F. Which one of the following

Last Answer : The diagram given below [Fig. 16.18] shows how things get to and from the liver. They are ... D. Bis the pancreatic artery and Eis the hepatic artery

How much is a F.Dumolin 16 ga Shotgun worth It has Choke 17.0 on it?

Description : How much is a F.Dumolin 16 ga Shotgun worth It has Choke 17.0 on it?

Last Answer : The value of any firearm is based on the exact MAKE, MODEL and CONDITION. We have the MAKE of your gun. Without the others, somewhere between $1 and $1,000. Francois Dumoulin (check ... The firm is currently catalogued as: DUMOULIN HERSTAL s.a.Site New MarketRue du Tige 13B-4040 HerstalBelgium

What is 16 C to F?

Description : What is 16 C to F?

Last Answer : Feel Free to Answer

Why the earthing transformer primary voltage is 16.5 kV rated in main generator even though actual voltage during the E/F is root 3 times less?

Description : Why the earthing transformer primary voltage is 16.5 kV rated in main generator even though actual voltage during the E/F is root 3 times less?

Last Answer : The transformer should not saturate during E/F otherwise it will cause ferroresonance with the GT winding capacitance. Dangerous O/V and neutral shifting will occur. During loss of load or field ... saturation. Saturation can also occur due to point on wave of application causing flux doubling. 

Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Description : Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Last Answer : g. Allof these

The value of quadratic polynomial f (x) = 2x 2 – 3x- 2 at x = -2 is ...... (a) 12 (b) 15 (c) -12 (d) 16

Description : The value of quadratic polynomial f (x) = 2x 2 – 3x- 2 at x = -2 is ...... (a) 12 (b) 15 (c) -12 (d) 16

Last Answer : (a) 12

f = 16/NRe , is valid for (A) Turbulent flow (B) Laminar flow through an open channel(C) Steady flow(D) None of these

Description : f = 16/NRe , is valid for (A) Turbulent flow (B) Laminar flow through an open channel (C) Steady flow (D) None of these

Last Answer : (D) None of these

A base-16 number system that uses sixteen distinct symbols 0-9 and A-F to represent numbers from 0 to 15. A. Binary B. Decimal C. Hexadecimal D. Hepadeximal

Description : A base-16 number system that uses sixteen distinct symbols 0-9 and A-F to represent numbers from 0 to 15. A. Binary B. Decimal C. Hexadecimal D. Hepadeximal

Last Answer : A. Binary

f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence partitions? A. 15, 19 and 25 degrees B. 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Description : f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence ... 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Last Answer : A. 15, 19 and 25 degrees

Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB(x))) Then, f(A+B) is equal to (A) {(0.5,12), (0.6,13), (1,14), (0.7,15), (0.7,16), (1,17), (1,18)} (B) {(0.5,12), (0.6,13), (1,14), (1,15), (1,16), (1,17), (1,18)} (C) {(0.3,12), (0.5,13), (0.5,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Description : Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB( ... ,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Last Answer : (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}