Chemical shifts (δ) are typically reported in units of A. Gauss (G) B. Millitesla per meter (mT/m) C. Parts per million (ppm) D. Percent (%)

Chemical shifts (δ) are typically reported in units of A. Gauss (G) B. Millitesla per meter (mT/m) C. Parts per million (ppm) D. Percent (%)
by

1 Answer

Answer :

Parts per million (ppm) 
by

Related questions

he dipole magnetic moment (μ) is directly proportional to nuclear spin (I), connected by a constant called the A. Gyromagnetic ratio (γ) B. Planck's constant (h) C. Nuclear susceptibility (χ) D. Chemical shift (δ)

Description : he dipole magnetic moment (μ) is directly proportional to nuclear spin (I), connected by a constant called the A. Gyromagnetic ratio (γ) B. Planck's constant (h) C. Nuclear susceptibility (χ) D. Chemical shift (δ) 

Last Answer : Gyromagnetic ratio (γ)

What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Description : What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Last Answer : When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei

Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Description : Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Last Answer : Spin-down

In mass spectrometry, fragmentation of ions is achieved through? A. Ionization B. Splitting C. Solubilization D. Coupling

Description : In mass spectrometry, fragmentation of ions is achieved through? A. Ionization B. Splitting C. Solubilization D. Coupling

Last Answer : Ionization

Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC

Description : Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC

Last Answer : IR

HPLC is an abbreviation for? A. High Profit Liquid Chromatography B. High Pressure Liquid Chromatography C. Higher Performance Low Chromatography D. Higher Profit Low Chromatography

Description : HPLC is an abbreviation for? A. High Profit Liquid Chromatography B. High Pressure Liquid Chromatography C. Higher Performance Low Chromatography D. Higher Profit Low Chromatography

Last Answer : High Pressure Liquid Chromatography

The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the components with a stationary and a mobile phases C. the absorption of infrared radiation by the components. D. the deflection of charged particles in a magnetic field.

Description : The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the ... infrared radiation by the components. D. the deflection of charged particles in a magnetic field. 

Last Answer : the interaction of the components with a stationary and a mobile phases

In a chromatographic separation, which of the following is most appropriate for the qualitative identification of a substance? A. Relative retention factor B. Retention factor C. Retention time D. Resolution

Description : In a chromatographic separation, which of the following is most appropriate for the qualitative identification of a substance? A. Relative retention factor B. Retention factor C. Retention time D. Resolution 

Last Answer : Retention time

Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Description : Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Last Answer : Inversely related to height equivalent to theoretical plates 

Which one of the following is necessary for mass spectrometry to occur? A. Loss of an electron B. Change of alignment of a proton in a magnetic field C. A molecular vibration D. Excitation of an electron from the ground state to a higher energy state

Description : Which one of the following is necessary for mass spectrometry to occur? A. Loss of an electron B. Change of alignment of a proton in a magnetic field C. A molecular vibration D. Excitation of an electron from the ground state to a higher energy state

Last Answer : Loss of an electron

The base peak in mass spectrum is? A. The lowest mass peak B. The peak corresponding to the parent ion C. The highest mass peak D. The peak set to 100% relative intensity

Description : The base peak in mass spectrum is? A. The lowest mass peak B. The peak corresponding to the parent ion C. The highest mass peak D. The peak set to 100% relative intensity

Last Answer : The peak set to 100% relative intensity

Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Description : Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Last Answer : Spin-spin coupling

1H nuclei located near electronegative atoms tend to be ______ relative to 1H nuclei A. Shielded B. Deshielded C. Resonanced D. Split

Description : 1H nuclei located near electronegative atoms tend to be ______ relative to 1H nuclei A. Shielded B. Deshielded C. Resonanced D. Split

Last Answer : Deshielded

Which of the following is used as a carrier gas in gas chromatography A. Carbon dioxide B. Oxygen C. Helium D. Methane

Description : Which of the following is used as a carrier gas in gas chromatography A. Carbon dioxide B. Oxygen C. Helium D. Methane

Last Answer : Helium

Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Description : Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Last Answer : Refractive index detector

What is a chromophore? A. A coloured compound B. A group of atoms in compound responsible for electromagnetic radiation C. A group of atoms in a compound responsible for the absorption of electromagnetic radiation D. A group of atoms in coloured compound

Description : What is a chromophore? A. A coloured compound B. A group of atoms in compound responsible for electromagnetic radiation C. A group of atoms in a compound responsible for the absorption of electromagnetic radiation D. A group of atoms in coloured compound

Last Answer : A group of atoms in a compound responsible for the absorption of electromagnetic radiation 

Infrared spectroscopy provides valuable information about A. Molecular weight B. Melting point C. Conjugation D. Functional groups

Description : Infrared spectroscopy provides valuable information about A. Molecular weight B. Melting point C. Conjugation D. Functional groups

Last Answer : Functional groups

To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number and the height of the theoretical plates on the column. D. Decrease both the number and the height of the theoretical plates on the column

Description : To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number ... the column. D. Decrease both the number and the height of the theoretical plates on the column

Last Answer : Increase the number of theoretical plates on the column

The fluid exiting a chromatographic column is called the A. eluent B. eluate C. analyte D. elution

Description : The fluid exiting a chromatographic column is called the A. eluent B. eluate C. analyte D. elution

Last Answer : eluate

Mobile phase can be A. gas or liquid B. solid or liquid C. only solid D. gas only

Description : Mobile phase can be A. gas or liquid B. solid or liquid C. only solid D. gas only 

Last Answer : gas or liquid

Chromatography can be used to A. form mixtures B. change mixture compositions C. separate mixtures into pure substances D. all of these

Description : Chromatography can be used to A. form mixtures B. change mixture compositions C. separate mixtures into pure substances D. all of these

Last Answer : separate mixtures into pure substances

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : (4) parts per million Explanation: PPM is an abbreviation of Parts Per Million. It is commonly used as a measure of small levels of pollutants in air, water, body fluids, etc. Parts per million is the mass ratio between the pollutant component and the solution.

Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Description : Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Last Answer : (D) 5000

Permissible safe limit (TLV) of __________ toxic gas is 100-1000 parts per million (ppm). (A) Highly (B) Moderately (C) Extremely (D) Very extremely

Description : Permissible safe limit (TLV) of __________ toxic gas is 100-1000 parts per million (ppm). (A) Highly (B) Moderately (C) Extremely (D) Very extremely

Last Answer : (B) Moderately

Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Description : Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Last Answer : (B) 0.2

Carbon dioxide is an important greenhouse gas. What is the current rate in parts per million per year of atmospheric increase of this gas? w) 0.15 ppm per year (parts per million) x) 1.5 ppm per year y) 15 ppm per year z) 150 ppm per year

Description : Carbon dioxide is an important greenhouse gas. What is the current rate in parts per million per year of atmospheric increase of this gas? w) 0.15 ppm per year (parts per million) x) 1.5 ppm per year y) 15 ppm per year z) 150 ppm per year 

Last Answer : ANSWER: X -- 1.5 PPM PER YEAR 

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : parts per million

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Type δ H chain is present in (A) Ig G (B) Ig A (C) Ig M (D) Ig D

Description : Type δ H chain is present in (A) Ig G (B) Ig A (C) Ig M (D) Ig D

Last Answer : Answer : D

The natural frequency (in Hz) of free longitudinal vibrations is equal to a) Square root (k/m) / (2π) b) Square root (g/δ) / (2π) c) 0.4985/δ d) all of the mentioned

Description : The natural frequency (in Hz) of free longitudinal vibrations is equal to a) Square root (k/m) / (2π) b) Square root (g/δ) / (2π) c) 0.4985/δ d) all of the mentioned

Last Answer : d) all of the mentioned

Would this gauss meter be any good?

Description : Would this gauss meter be any good?

Last Answer : answer:Oooo!!! Did you get the Chony? Made in Mississigua Ont? I have one of those and love it. I cannot tell about the gauss meter. TI could be anything. Sorry. The Chony on the other hand is fantastic.

The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Description : The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Last Answer : Answer: C

The Tesla and the Gauss are units of measure of: w) conductance x) magnetic field strength y) magnetic flux z) electrical current

Description : The Tesla and the Gauss are units of measure of: w) conductance x) magnetic field strength y) magnetic flux z) electrical current

Last Answer : ANSWER: X -- MAGNETIC FIELD STRENGTH

Daily secretion of insulin is about δ– (A) 10–20 mg (B) 40–50 mg (C) 10–20 units (D) 40–50 units

Description : Daily secretion of insulin is about δ– (A) 10–20 mg (B) 40–50 mg (C) 10–20 units (D) 40–50 units

Last Answer : Answer : D

‘Pusa Neem’ (Neem-oil coated urea)— product used as inhibitors for slow release, was designated and reported by—(A) Dr. Rajendra Prasad and Colleagues (B) Dr. R.S. Paroda (C) Dr. G.B. Singh (D) Dr. M.S. Randhawa

Description : ‘Pusa Neem’ (Neem-oil coated urea)— product used as inhibitors for slow release, was designated and reported by—(A) Dr. Rajendra Prasad and Colleagues (B) Dr. R.S. Paroda (C) Dr. G.B. Singh (D) Dr. M.S. Randhawa

Last Answer : (A) Dr. Rajendra Prasad and Colleagues

What are the units used to count the speed of a printer? 1) CPM 2) DPI 3) PPM 4) BIT

Description : What are the units used to count the speed of a printer? 1) CPM 2) DPI 3) PPM 4) BIT

Last Answer : 4) BIT

The nucleotide binding site of G-proteins is present on their (A) α-Subunit (B) β-Subunit α- and β- (C) γ-Subunit (D) δ-Subunit

Description : The nucleotide binding site of G-proteins is present on their (A) α-Subunit (B) β-Subunit α- and β- (C) γ-Subunit (D) δ-Subunit

Last Answer : Answer : A

Free energy change ( G) of a reaction is referred as the amount of energy Δ A- liberated during reaction B- taken up during reaction C- liberated or taken up during reaction D- none of these

Description : Free energy change ( G) of a reaction is referred as the amount of energy Δ A- liberated during reaction B- taken up during reaction C- liberated or taken up during reaction D- none of these

Last Answer : liberated or taken up during reaction

Which one of the following statements about buffers is false? a. They work inside cells. b. They consist of a weak acid and weak base. c. They prevent pH shifts. d. They enhance chemical reactions.

Description : Which one of the following statements about buffers is false? a. They work inside cells. b. They consist of a weak acid and weak base. c. They prevent pH shifts. d. They enhance chemical reactions.

Last Answer : d. They enhance chemical reactions.

What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Description : What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Last Answer : b. $10 million

Point out the correct statement. a) A standard machine instance (virtual computer) might cost $0.10 or less an hour b) A typical storage charge might be $0.10 per GB/month c) Outsourcing shifts the burden of capital expenditures onto the service provider d) All of the mentioned

Description : Point out the correct statement. a) A standard machine instance (virtual computer) might cost $0.10 or less an hour b) A typical storage charge might be $0.10 per GB/month c) Outsourcing shifts the burden of capital expenditures onto the service provider d) All of the mentioned

Last Answer : All of the mentioned

Two persons of masses 55 kg and 65 kg respectively, are at the opposite ends of a boat. The length of the boat is 3.0 m and weighs 100 kg. The 55 kg man walks up to the 65 kg man and sits with him. If the boat is in still water the centre of mass of the system shifts by

Description : Two persons of masses 55 kg and 65 kg respectively, are at the opposite ends of a boat. The length of the boat is 3.0 m and weighs 100 kg. The 55 kg man walks up to the 65 kg man and sits with him. If the boat is in still water the centre of mass of the system shifts by

Last Answer : (4) zero

The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter

Description : The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter

Last Answer : Answer: Option C

Which of the following correctly states Gauss law? a) Electric flux is equal to charge b) Electric flux per unit volume is equal to charge c) Electric field is equal to charge density d) Electric flux per unit volume is equal to volume charge density

Description : Which of the following correctly states Gauss law? a) Electric flux is equal to charge b) Electric flux per unit volume is equal to charge c) Electric field is equal to charge density d) Electric flux per unit volume is equal to volume charge density

Last Answer : d) Electric flux per unit volume is equal to volume charge density

Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Description : Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Last Answer : PO43−

A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be

Description : A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be

Last Answer : A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be A. 200 B. 400 C. 500 D. 800

37. Euro –II norm stipulate ‘sulphur’ level in diesel and petrol to be ... e) 400 ppm in diesel and 150 ppm in petrol. f) 350 ppm in diesel and 180 ppm in petrol. g) 100 ppm in diesel and 50 ppm in petrol. h) 350 ppm in diesel and 150 ppm in petrol.

Description : 37. Euro –II norm stipulate ‘sulphur’ level in diesel and petrol to be ... e) 400 ppm in diesel and 150 ppm in petrol. f) 350 ppm in diesel and 180 ppm in petrol. g) 100 ppm in diesel and 50 ppm in petrol. h) 350 ppm in diesel and 150 ppm in petrol.

Last Answer : h) 350 ppm in diesel and 150 ppm in petrol.

δ = (W a 2 b 2 ) / (3 EIL) is the value of deflection for ______ A. simply supported beam which has central point load B. simply supported beam which has eccentric point load C. simply supported beam which has U.D.L. point load per unit length D. fixed beam which has central point load

Description : δ = (W a 2 b 2 ) / (3 EIL) is the value of deflection for ______ A. simply supported beam which has central point load B. simply supported beam which has eccentric point load C. simply supported beam which has U.D.L. point load per unit length D. fixed beam which has central point load

Last Answer : B. simply supported beam which has eccentric point load