Infrared spectroscopy provides valuable information about A. Molecular weight B. Melting point C. Conjugation D. Functional groups

Infrared spectroscopy provides valuable information about A. Molecular weight B. Melting point C. Conjugation D. Functional groups
by

1 Answer

Answer :

Functional groups
by

Related questions

The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the components with a stationary and a mobile phases C. the absorption of infrared radiation by the components. D. the deflection of charged particles in a magnetic field.

Description : The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the ... infrared radiation by the components. D. the deflection of charged particles in a magnetic field. 

Last Answer : the interaction of the components with a stationary and a mobile phases

Which one of the following is necessary for mass spectrometry to occur? A. Loss of an electron B. Change of alignment of a proton in a magnetic field C. A molecular vibration D. Excitation of an electron from the ground state to a higher energy state

Description : Which one of the following is necessary for mass spectrometry to occur? A. Loss of an electron B. Change of alignment of a proton in a magnetic field C. A molecular vibration D. Excitation of an electron from the ground state to a higher energy state

Last Answer : Loss of an electron

What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Description : What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Last Answer : When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei

Chemical shifts (δ) are typically reported in units of A. Gauss (G) B. Millitesla per meter (mT/m) C. Parts per million (ppm) D. Percent (%)

Description : Chemical shifts (δ) are typically reported in units of A. Gauss (G) B. Millitesla per meter (mT/m) C. Parts per million (ppm) D. Percent (%)

Last Answer : Parts per million (ppm) 

Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Description : Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Last Answer : Spin-down

he dipole magnetic moment (μ) is directly proportional to nuclear spin (I), connected by a constant called the A. Gyromagnetic ratio (γ) B. Planck's constant (h) C. Nuclear susceptibility (χ) D. Chemical shift (δ)

Description : he dipole magnetic moment (μ) is directly proportional to nuclear spin (I), connected by a constant called the A. Gyromagnetic ratio (γ) B. Planck's constant (h) C. Nuclear susceptibility (χ) D. Chemical shift (δ) 

Last Answer : Gyromagnetic ratio (γ)

In mass spectrometry, fragmentation of ions is achieved through? A. Ionization B. Splitting C. Solubilization D. Coupling

Description : In mass spectrometry, fragmentation of ions is achieved through? A. Ionization B. Splitting C. Solubilization D. Coupling

Last Answer : Ionization

Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC

Description : Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC

Last Answer : IR

HPLC is an abbreviation for? A. High Profit Liquid Chromatography B. High Pressure Liquid Chromatography C. Higher Performance Low Chromatography D. Higher Profit Low Chromatography

Description : HPLC is an abbreviation for? A. High Profit Liquid Chromatography B. High Pressure Liquid Chromatography C. Higher Performance Low Chromatography D. Higher Profit Low Chromatography

Last Answer : High Pressure Liquid Chromatography

In a chromatographic separation, which of the following is most appropriate for the qualitative identification of a substance? A. Relative retention factor B. Retention factor C. Retention time D. Resolution

Description : In a chromatographic separation, which of the following is most appropriate for the qualitative identification of a substance? A. Relative retention factor B. Retention factor C. Retention time D. Resolution 

Last Answer : Retention time

Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Description : Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Last Answer : Inversely related to height equivalent to theoretical plates 

The base peak in mass spectrum is? A. The lowest mass peak B. The peak corresponding to the parent ion C. The highest mass peak D. The peak set to 100% relative intensity

Description : The base peak in mass spectrum is? A. The lowest mass peak B. The peak corresponding to the parent ion C. The highest mass peak D. The peak set to 100% relative intensity

Last Answer : The peak set to 100% relative intensity

Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Description : Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Last Answer : Spin-spin coupling

1H nuclei located near electronegative atoms tend to be ______ relative to 1H nuclei A. Shielded B. Deshielded C. Resonanced D. Split

Description : 1H nuclei located near electronegative atoms tend to be ______ relative to 1H nuclei A. Shielded B. Deshielded C. Resonanced D. Split

Last Answer : Deshielded

Which of the following is used as a carrier gas in gas chromatography A. Carbon dioxide B. Oxygen C. Helium D. Methane

Description : Which of the following is used as a carrier gas in gas chromatography A. Carbon dioxide B. Oxygen C. Helium D. Methane

Last Answer : Helium

Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Description : Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Last Answer : Refractive index detector

What is a chromophore? A. A coloured compound B. A group of atoms in compound responsible for electromagnetic radiation C. A group of atoms in a compound responsible for the absorption of electromagnetic radiation D. A group of atoms in coloured compound

Description : What is a chromophore? A. A coloured compound B. A group of atoms in compound responsible for electromagnetic radiation C. A group of atoms in a compound responsible for the absorption of electromagnetic radiation D. A group of atoms in coloured compound

Last Answer : A group of atoms in a compound responsible for the absorption of electromagnetic radiation 

To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number and the height of the theoretical plates on the column. D. Decrease both the number and the height of the theoretical plates on the column

Description : To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number ... the column. D. Decrease both the number and the height of the theoretical plates on the column

Last Answer : Increase the number of theoretical plates on the column

The fluid exiting a chromatographic column is called the A. eluent B. eluate C. analyte D. elution

Description : The fluid exiting a chromatographic column is called the A. eluent B. eluate C. analyte D. elution

Last Answer : eluate

Mobile phase can be A. gas or liquid B. solid or liquid C. only solid D. gas only

Description : Mobile phase can be A. gas or liquid B. solid or liquid C. only solid D. gas only 

Last Answer : gas or liquid

Chromatography can be used to A. form mixtures B. change mixture compositions C. separate mixtures into pure substances D. all of these

Description : Chromatography can be used to A. form mixtures B. change mixture compositions C. separate mixtures into pure substances D. all of these

Last Answer : separate mixtures into pure substances

FTIR spectroscopy stands for? A. Fourier Track Infrared spectroscopy B. Fourier Transform Infrared spectroscopy C. Fast Track Infrared spectroscopy D. Fast Transform Infrared spectroscopy

Description : FTIR spectroscopy stands for? A. Fourier Track Infrared spectroscopy B. Fourier Transform Infrared spectroscopy C. Fast Track Infrared spectroscopy D. Fast Transform Infrared spectroscopy

Last Answer : B. Fourier Transform Infrared spectroscopy

The isomers of a substance must have (a) same chemical properties (b) same molecular weight (c) same structural formula (d) same functional groups

Description : The isomers of a substance must have (a) same chemical properties (b) same molecular weight (c) same structural formula (d) same functional groups

Last Answer : same molecular weight

The project scope statement furnishes the basis for: 1. Provides links to the clients functional management groups 2. Allowing the project to move to the next phase. A way to provide updated information to the accounting department

Description : The project scope statement furnishes the basis for: 1. Provides links to the clients functional management groups  2. Allowing the project to move to the next phase . A way to provide updated information to the accounting department

Last Answer : 1. Provides links to the clients functional management groups

Application of HPLC includes? A. Detection of functional groups in organic compounds B. Determination of molecular mass C. Separation of volatile compounds D. Impurity profiling

Description : Application of HPLC includes? A. Detection of functional groups in organic compounds B. Determination of molecular mass C. Separation of volatile compounds D. Impurity profiling

Last Answer : D. Impurity profiling

As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; melting point increases. (c) boiling point increases ; melting point decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Description : As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; ... decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Last Answer : boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Consider (R)- and (S)-2-butanol. Which physical property distinguishes the two compounds? (a) melting point(b) solubility in common solvents(c) Rotation of plane-polarized light(d) Infrared spectrum

Description : Consider (R)- and (S)-2-butanol. Which physical property distinguishes the two compounds? (a) melting point (b) solubility in common solvents (c) Rotation of plane-polarized light (d) Infrared spectrum

Last Answer : Rotation of plane-polarized light

Change in molecular structure of applied herbicides inside the plant is known as a). Conjugation b). Metabolism c). Reverse metabolism d). Degradation

Description : Change in molecular structure of applied herbicides inside the plant is known as a). Conjugation b). Metabolism c). Reverse metabolism d). Degradation

Last Answer : b). Metabolism

For conjugation with many enogenous and exogenous substances before elimination in urine, the uronic acid pathway provides (A) Active glucuronate (B) Gulonate (C) Xylulose (D) Xylitol

Description : For conjugation with many enogenous and exogenous substances before elimination in urine, the uronic acid pathway provides (A) Active glucuronate (B) Gulonate (C) Xylulose (D) Xylitol

Last Answer : Answer : A

Conjugation of electron withdrawing groups, e.g., `-CHO`, `-overset(O)overset("|")C-R", "-overset(O)overset(||)C-OR", "-C-=N", "-NO_(2)` activates nuc

Description : Conjugation of electron withdrawing groups, e.g., `-CHO`, `-overset(O)overset("|")C-R", "-overset(O)overset(||)C-OR", "-C-=N", "-NO_(2)` activates nuc

Last Answer : Conjugation of electron withdrawing groups, e.g., `-CHO`, `-overset(O)overset("|")C-R", "-overset(O) ... O)overset(||)C-ORgt-overset(O)overset(||)C-R`

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Which of the following best explains why the melting points of saturated fats increase with increasing molecular weight? (a) decreased hydrogen bonding (b) increased hydrogen bonding (c) decreased intermolecular van der Waal’s interactions (d) increased intermolecular van der Waal’s interactions

Description : Which of the following best explains why the melting points of saturated fats increase with increasing molecular weight? (a) decreased hydrogen bonding (b) increased hydrogen bonding (c) decreased intermolecular van der Waal’s interactions (d) increased intermolecular van der Waal’s interactions

Last Answer : increased intermolecular van der Waal’s interactions

The melting points of aldehydes and ketones tend to : (a) decrease with increasing molecular weight. (b) increase with increasing molecular weight. (c) remain unchanged with increasing molecular weight. (d) be unpredictable due to resonance

Description : The melting points of aldehydes and ketones tend to : (a) decrease with increasing molecular weight. (b) increase with increasing molecular weight. (c) remain unchanged with increasing molecular weight. (d) be unpredictable due to resonance

Last Answer : increase with increasing molecular weight.

Covalent network crystals have-------? A. higher melting point then molecular crystals (Answer) B. lower melting point then molecular crystals C. discrete molecules linked by Van der waals forces D. hydrogen bonding

Description : Covalent network crystals have-------? A. higher melting point then molecular crystals (Answer) B. lower melting point then molecular crystals C. discrete molecules linked by Van der waals forces D. hydrogen bonding

Last Answer : A. higher melting point then molecular crystals (Answer)

Solids may be considered to be either crystalline noncrystalline. The basic difference between them is that a crystal, in contrast to a noncrystal: w) has a sharp melting point x) has an irregular array of atoms y) exhibits double refraction z) has a completely regular atomic or molecular structure

Description : Solids may be considered to be either crystalline noncrystalline. The basic difference between them is that a crystal, in contrast to a noncrystal: w) has a sharp melting point x) has an irregular array of atoms y) exhibits double refraction z) has a completely regular atomic or molecular structure

Last Answer : ANSWER: Z -- HAS A COMPLETELY REGULAR ATOMIC OR MOLECULAR STRUCTURE

Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel

Description : Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel

Last Answer : Reduce energy

What property of low-molecular weight aldehydes and ketones accounts for the magnitude of their boiling points? (a) The ability to form strong H-bonds between their molecules. (b) The ability of the carbonyl oxygen to form H-bonds with other carbonyl groups. (c) The ability of the polar carbonyl group to attract other polar molecules. (d) The ability of the carbonyl group to attract electrophiles and form bonds.

Description : What property of low-molecular weight aldehydes and ketones accounts for the magnitude of their boiling points? (a) The ability to form strong H-bonds between their molecules. (b) The ability of ... other polar molecules. (d) The ability of the carbonyl group to attract electrophiles and form bonds.

Last Answer : The ability of the polar carbonyl group to attract other polar molecules.

How many parts does a spectroscopy consist of ?

Description : How many parts does a spectroscopy consist of ?

Last Answer : Spectral instrument consists of three parts. The parts are- a. Collimator b . Telescope c . Prism table

What is a spectroscopy ?

Description : What is a spectroscopy ?

Last Answer : : Spectrometer is a device used to examine the spectrum emitted from different sources .

Why water is not good solvent for ir spectroscopy?

Description : Why water is not good solvent for ir spectroscopy?

Last Answer : Need answer

What is absorption spectroscopy?

Description : What is absorption spectroscopy?

Last Answer : Atomic absorption spectroscopy is the use of principles ofatomic absorption of light to determine how much of a metallicelement is in a sample. It works by using a few principles whichare faily simple and easy ... at the drawing and the cool pics in the firstlink. It should lock things in for ya.

(4) A mixture of Fe₂O₃, 3H₂O and FeO Explanation: Several forms of rust are distinguishable both visually and by spectroscopy, and form under different circumstances. Rust consists of hydrated iron (III) oxides Fe2O

Description : (4) A mixture of Fe₂O₃, 3H₂O and FeO Explanation: Several forms of rust are distinguishable both visually and by spectroscopy, and form under different circumstances. Rust consists of hydrated iron (III) oxides Fe2O

Last Answer : Catalyst is a substance which – (1) increases the rate of the reaction (2) decreases the rate of reaction (3) has no action on the rate of the reaction (4) None of these

The presence of Cobalt in Vitamin B12 was established for the first time by – (1) Hydrolysis test (2) Spectroscopy (3) Borax-Bead test (4) Sodium Nitroprusside test

Description : The presence of Cobalt in Vitamin B12 was established for the first time by – (1) Hydrolysis test (2) Spectroscopy (3) Borax-Bead test (4) Sodium Nitroprusside test

Last Answer : (2) Spectroscopy Explanation: Atomic absorption spectroscopy is an analytical chemistry technique used for determining concentration of particular metal element and is widely used in pharmaceutics. It was used for the determination of cobalt in Vitamin B12.

It is possible to distinguish between optical isomers (a) by using chemical tests (b) by mass spectrometry (c) by IR spectroscopy(d) by polarimetry

Description : It is possible to distinguish between optical isomers (a) by using chemical tests (b) by mass spectrometry (c) by IR spectroscopy (d) by polarimetry

Last Answer : (d) by polarimetry

Which of the following methods is used for characterization of impurities? A. TLC B. Mass spectroscopy C. Column chromatography D. Potentiometry

Description : Which of the following methods is used for characterization of impurities? A. TLC B. Mass spectroscopy C. Column chromatography D. Potentiometry

Last Answer : B. Mass spectroscopy

The gas which was identified in the Sun using spectroscopy before its discovery on earth, is a) oxygen b) hydrogen c) helium d) nitrogen

Description : The gas which was identified in the Sun using spectroscopy before its discovery on earth, is a) oxygen b) hydrogen c) helium d) nitrogen

Last Answer : c) helium

The branch of physics that deals with the investigation of wavelengths of electro magnetic radiation emitted or absorbed by atoms is known as a) spectroscopy b) astroscopy c) radioscopy d) stereoscopy

Description : The branch of physics that deals with the investigation of wavelengths of electro magnetic radiation emitted or absorbed by atoms is known as a) spectroscopy b) astroscopy c) radioscopy d) stereoscopy

Last Answer : a) spectroscopy

The presence of Cobalt in Vitamin B12 was established for the first time by (1) Hydrolysis test (2) Spectroscopy (3) Borax-Bead test (4) Sodium Nitroprusside test

Description : The presence of Cobalt in Vitamin B12 was established for the first time by (1) Hydrolysis test (2) Spectroscopy (3) Borax-Bead test (4) Sodium Nitroprusside test

Last Answer : Spectroscopy

Consider a 1°, 2° and 3° amine, all of equivalent molecular weight. Which amine is most likely to have the lowest boiling point? (a) 1° amine (b) 2° amine (c) 3° amine (d) Not enough information to determine

Description : Consider a 1°, 2° and 3° amine, all of equivalent molecular weight. Which amine is most likely to have the lowest boiling point? (a) 1° amine (b) 2° amine (c) 3° amine (d) Not enough information to determine

Last Answer : 3° amine

Transfer of genetic information from one bacterium to another in the transduction process is through (a) bacteriophages released from the donor bacterial strain (b) another bacterium having special organ for conjugation (c) physical contact between donor and recipient strains (d) conjugation between opposite strain bacterium.

Description : Transfer of genetic information from one bacterium to another in the transduction process is through (a) bacteriophages released from the donor bacterial strain (b) another bacterium ... physical contact between donor and recipient strains (d) conjugation between opposite strain bacterium.

Last Answer : (a) bacteriophages released from the donor bacterial strain