Mobile phase can be A. gas or liquid B. solid or liquid C. only solid D. gas only

Mobile phase can be A. gas or liquid B. solid or liquid C. only solid D. gas only 
by

1 Answer

Answer :

gas or liquid
by

Related questions

The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the components with a stationary and a mobile phases C. the absorption of infrared radiation by the components. D. the deflection of charged particles in a magnetic field.

Description : The basis of the technique of chromatography for separating components of a mixture is? A. the differing movement of particles of different mass in an electrical field B. the interaction of the ... infrared radiation by the components. D. the deflection of charged particles in a magnetic field. 

Last Answer : the interaction of the components with a stationary and a mobile phases

HPLC is an abbreviation for? A. High Profit Liquid Chromatography B. High Pressure Liquid Chromatography C. Higher Performance Low Chromatography D. Higher Profit Low Chromatography

Description : HPLC is an abbreviation for? A. High Profit Liquid Chromatography B. High Pressure Liquid Chromatography C. Higher Performance Low Chromatography D. Higher Profit Low Chromatography

Last Answer : High Pressure Liquid Chromatography

Which of the following is used as a carrier gas in gas chromatography A. Carbon dioxide B. Oxygen C. Helium D. Methane

Description : Which of the following is used as a carrier gas in gas chromatography A. Carbon dioxide B. Oxygen C. Helium D. Methane

Last Answer : Helium

What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Description : What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Last Answer : When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei

Chemical shifts (δ) are typically reported in units of A. Gauss (G) B. Millitesla per meter (mT/m) C. Parts per million (ppm) D. Percent (%)

Description : Chemical shifts (δ) are typically reported in units of A. Gauss (G) B. Millitesla per meter (mT/m) C. Parts per million (ppm) D. Percent (%)

Last Answer : Parts per million (ppm) 

Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Description : Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Last Answer : Spin-down

he dipole magnetic moment (μ) is directly proportional to nuclear spin (I), connected by a constant called the A. Gyromagnetic ratio (γ) B. Planck's constant (h) C. Nuclear susceptibility (χ) D. Chemical shift (δ)

Description : he dipole magnetic moment (μ) is directly proportional to nuclear spin (I), connected by a constant called the A. Gyromagnetic ratio (γ) B. Planck's constant (h) C. Nuclear susceptibility (χ) D. Chemical shift (δ) 

Last Answer : Gyromagnetic ratio (γ)

In mass spectrometry, fragmentation of ions is achieved through? A. Ionization B. Splitting C. Solubilization D. Coupling

Description : In mass spectrometry, fragmentation of ions is achieved through? A. Ionization B. Splitting C. Solubilization D. Coupling

Last Answer : Ionization

Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC

Description : Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC

Last Answer : IR

In a chromatographic separation, which of the following is most appropriate for the qualitative identification of a substance? A. Relative retention factor B. Retention factor C. Retention time D. Resolution

Description : In a chromatographic separation, which of the following is most appropriate for the qualitative identification of a substance? A. Relative retention factor B. Retention factor C. Retention time D. Resolution 

Last Answer : Retention time

Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Description : Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Last Answer : Inversely related to height equivalent to theoretical plates 

Which one of the following is necessary for mass spectrometry to occur? A. Loss of an electron B. Change of alignment of a proton in a magnetic field C. A molecular vibration D. Excitation of an electron from the ground state to a higher energy state

Description : Which one of the following is necessary for mass spectrometry to occur? A. Loss of an electron B. Change of alignment of a proton in a magnetic field C. A molecular vibration D. Excitation of an electron from the ground state to a higher energy state

Last Answer : Loss of an electron

The base peak in mass spectrum is? A. The lowest mass peak B. The peak corresponding to the parent ion C. The highest mass peak D. The peak set to 100% relative intensity

Description : The base peak in mass spectrum is? A. The lowest mass peak B. The peak corresponding to the parent ion C. The highest mass peak D. The peak set to 100% relative intensity

Last Answer : The peak set to 100% relative intensity

Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Description : Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Last Answer : Spin-spin coupling

1H nuclei located near electronegative atoms tend to be ______ relative to 1H nuclei A. Shielded B. Deshielded C. Resonanced D. Split

Description : 1H nuclei located near electronegative atoms tend to be ______ relative to 1H nuclei A. Shielded B. Deshielded C. Resonanced D. Split

Last Answer : Deshielded

Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Description : Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Last Answer : Refractive index detector

What is a chromophore? A. A coloured compound B. A group of atoms in compound responsible for electromagnetic radiation C. A group of atoms in a compound responsible for the absorption of electromagnetic radiation D. A group of atoms in coloured compound

Description : What is a chromophore? A. A coloured compound B. A group of atoms in compound responsible for electromagnetic radiation C. A group of atoms in a compound responsible for the absorption of electromagnetic radiation D. A group of atoms in coloured compound

Last Answer : A group of atoms in a compound responsible for the absorption of electromagnetic radiation 

Infrared spectroscopy provides valuable information about A. Molecular weight B. Melting point C. Conjugation D. Functional groups

Description : Infrared spectroscopy provides valuable information about A. Molecular weight B. Melting point C. Conjugation D. Functional groups

Last Answer : Functional groups

To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number and the height of the theoretical plates on the column. D. Decrease both the number and the height of the theoretical plates on the column

Description : To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number ... the column. D. Decrease both the number and the height of the theoretical plates on the column

Last Answer : Increase the number of theoretical plates on the column

The fluid exiting a chromatographic column is called the A. eluent B. eluate C. analyte D. elution

Description : The fluid exiting a chromatographic column is called the A. eluent B. eluate C. analyte D. elution

Last Answer : eluate

Chromatography can be used to A. form mixtures B. change mixture compositions C. separate mixtures into pure substances D. all of these

Description : Chromatography can be used to A. form mixtures B. change mixture compositions C. separate mixtures into pure substances D. all of these

Last Answer : separate mixtures into pure substances

In HPLC, the stationary phase is made of _________ and the mobile phase is made of _________ A. Solid, liquid B. Liquid, liquid C. Liquid, gas D. Solid, gas

Description : In HPLC, the stationary phase is made of _________ and the mobile phase is made of _________ A. Solid, liquid B. Liquid, liquid C. Liquid, gas D. Solid, gas

Last Answer : A. Solid, liquid

(4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Description : (4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Last Answer : Conduction band electrons have more mobility than holes because they – (1) are lighter (2) experience collision less frequently (3) have negative charge (4) need less energy to move them

(2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

(2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Description : One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Last Answer : (C) Exchange between a liquid phase and an organic resin phase

_________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Sublimation

The energy associated with individual molecules in a gas, liquid or solid.  a. Specific Energy  b. Molecular Energy  c. Internal Energy  d. Phase Energy

Description : The energy associated with individual molecules in a gas, liquid or solid.  a. Specific Energy  b. Molecular Energy  c. Internal Energy  d. Phase Energy

Last Answer : Internal Energy

____ is when water goes from a solid to a gas without passing through the liquid phase. a. Transfusion c. Evaporation b. Sublimation d. Condensation

Description : ____ is when water goes from a solid to a gas without passing through the liquid phase. a. Transfusion c. Evaporation b. Sublimation d. Condensation

Last Answer : b. Sublimation

At room temperature, most elements are in which phase of matter? w) solid x) liquid y) gas z) plasma

Description : At room temperature, most elements are in which phase of matter? w) solid x) liquid y) gas z) plasma

Last Answer : ANSWER: W -- SOLID

Most substances are more dense in their solid form than in their liquid or gaseous form. What makes the solid phase more dense?

Description : Most substances are more dense in their solid form than in their liquid or gaseous form. What makes the solid phase more dense?

Last Answer : Solid has more energy

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Description : If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Last Answer : B) Clausius-Clapeyron Equation

Shrinkage allowance on pattern is provided to compensate for shrinkage when the (A) Metal changes from liquid state to solid state at freezing temperature (B) Solid phase temperature drops from freezing temperature to the room temperature (C) Liquid metal temperature drops from pouring temperature to room temperature (D) Liquid metal temperature drops from pouring temperature to freezing temperature

Description : Shrinkage allowance on pattern is provided to compensate for shrinkage when the (A) Metal changes from liquid state to solid state at freezing temperature (B) Solid phase temperature drops ... to room temperature (D) Liquid metal temperature drops from pouring temperature to freezing temperature

Last Answer : (B) Solid phase temperature drops from freezing temperature to the room temperature

The phase transition of a liquid to a solid  a. Solidification  b. Freezing  c. Fusion  d. All of these

Description : The phase transition of a liquid to a solid  a. Solidification  b. Freezing  c. Fusion  d. All of these

Last Answer : All of these

What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Last Answer : Triple point

The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase.  a. Phase Pressure  b. Equilibrium Vapor Pressure  c. Specific Pressure  d. Equilibrium Phase Pressure

Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase.  a. Phase Pressure  b. Equilibrium Vapor Pressure  c. Specific Pressure  d. Equilibrium Phase Pressure

Last Answer : Equilibrium Vapor Pressure

An example of sample preparation in bioanalysis is __________________? A. Solid-solid extraction B. Solid-liquid extraction C. Liquid-solid extraction D. Solid-phase extraction

Description : An example of sample preparation in bioanalysis is __________________? A. Solid-solid extraction B. Solid-liquid extraction C. Liquid-solid extraction D. Solid-phase extraction

Last Answer : D. Solid-phase extraction

Metals can be _____ at room temperature. (1) Liquid only (2) Solid only (3) Solid or liquid (4) Solid, liquid or gas

Description : Metals can be _____ at room temperature. (1) Liquid only (2) Solid only (3) Solid or liquid (4) Solid, liquid or gas

Last Answer : (3) Solid or liquid Explanation: All metals except Mercury are solid at room temperature. Mercury is the only metallic element that is liquid at standard conditions for temperature and pressure; the only other element that is liquid under these conditions is bromine.

The only matter which exists in three forms (Solid; liquid; gas)?

Description : The only matter which exists in three forms (Solid; liquid; gas)?

Last Answer : Water

Metals can be ____ at room temperature. (1) Liquid only (2) Solid only (3) Solid or liquid (4) Solid, liquid or gas

Description : Metals can be ____ at room temperature. (1) Liquid only (2) Solid only (3) Solid or liquid (4) Solid, liquid or gas

Last Answer : Solid or liquid

What best describes the change directly from the gas phase to the solid phase?

Description : What best describes the change directly from the gas phase to the solid phase?

Last Answer : It is "Sublimation." Sublimation is the word used to describethe jump from the solid state of matter, directly to the gas stateof matter. A full diagram is available in the related link.

What phase change changes a solid to a gas?

Description : What phase change changes a solid to a gas?

Last Answer : Solid to Gas phase change is called Sublimation

Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Last Answer : (A) Ash resistance

What term describes the process when a solid phase changes directly to the gas phase?

Description : What term describes the process when a solid phase changes directly to the gas phase?

Last Answer : ANSWER: SUBLIMATION

What is the difference between a solid, a liquid, and a gas?

Description : What is the difference between a solid, a liquid, and a gas?

Last Answer : Answer: Solids have a fixed shape and volume, while liquids have a fixed volume but take the shape of their container, and gases have neither a fixed shape nor volume and take the shape and ... of matter are determined by the strength of the forces between the particles that make up a substance.

What is the name of the process where a liquid or gas flows around a solid object, creating a force called drag?

Description : What is the name of the process where a liquid or gas flows around a solid object, creating a force called drag?

Last Answer : A: Fluid dynamics.

I learned that everything is a solid, liquid, or gas. So what is electricity?

Description : I learned that everything is a solid, liquid, or gas. So what is electricity?

Last Answer : Not matter.

I am neither liquid, nor solid, or gas. I am used to create famous things, but I do not get any fame. If you merge solid and liquid you will find the other part of who I am. What am I? -Riddles

Description : I am neither liquid, nor solid, or gas. I am used to create famous things, but I do not get any fame. If you merge solid and liquid you will find the other part of who I am. What am I? -Riddles

Last Answer : I am Paint.