What happens to a nichrome wire in a non-luminous flame?

What happens to a nichrome wire in a non-luminous flame?
by

1 Answer

Answer :

The color of wire is unchanged.
by

Related questions

The hottest part of the gas flame is known as – (1) blue zone (2) non-luminous zone (3) luminous zone (4) dark zone

Description : The hottest part of the gas flame is known as – (1) blue zone (2) non-luminous zone (3) luminous zone (4) dark zone

Last Answer : (3) luminous zone

A sooty flame can be made non-luminous by (A) Admitting more gas (B) Shutting gas supply (C) Admitting more air (D) Shutting air supply

Description : A sooty flame can be made non-luminous by (A) Admitting more gas (B) Shutting gas supply (C) Admitting more air (D) Shutting air supply

Last Answer : (C) Admitting more air

Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Description : Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Last Answer : (C) Can be done with less excess ai

During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Description : During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Last Answer : (B) Complete combustion

Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C

Description : Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The hottest part of the flame lies in its _________zone. (A) Non-luminous (B) Luminous (C) Yellow (D) Unburnt gases

Description : The hottest part of the flame lies in its _________zone. (A) Non-luminous (B) Luminous (C) Yellow (D) Unburnt gases

Last Answer : (A) Non-luminous

The middle zone of a candle flame is known as the ________ zone. a) luminous b)non-luminous c)wax d)burning

Description : The middle zone of a candle flame is known as the ________ zone. a) luminous b)non-luminous c)wax d)burning

Last Answer : a) luminous

The hottest part of the gas flame is known as (1) blue zone (2) non-luminous zone (3) luminous zone (4) dark zone

Description : The hottest part of the gas flame is known as (1) blue zone (2) non-luminous zone (3) luminous zone (4) dark zone

Last Answer : luminous zone

In luminous flame the flame is produce when the air hole is open or close?

Description : In luminous flame the flame is produce when the air hole is open or close?

Last Answer : A bunsen burner (as used in a science lab or science classroom) will burn quietly, and a flickery yellow (like a wax candle) if the air hole is closed, or closed too much. If the air holes is opened, the flame will turn bluish and become noisy and hotter as more air mixes with the gas.

Which zone of a candle flame is the hottest? (1) Dark innermost zone (2) Outermost zone (3) Middle luminous zone (4) Central zone

Description : Which zone of a candle flame is the hottest? (1) Dark innermost zone (2) Outermost zone (3) Middle luminous zone (4) Central zone

Last Answer : (3) Middle luminous zone Explanation: The outermost zone of the flame is blue in colour and it is the hottest part. The innermost zone is the least hot and black in colour.

Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Description : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Last Answer : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is ` ... wire, what will be the current in the wire ?

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Description : Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Last Answer : (4) For all of the above reasons

High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Description : High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Last Answer : (A) Maraging steel

__________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Description : __________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Last Answer : (C) Invar

A nichrome wire used as heater coil has the resistance of 1 ohm/m. For ...

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.

Nichrome wire is an alloy of?

Description : Nichrome wire is an alloy of?

Last Answer : Nichrome wire is an alloy of nickel and chromium.

How can non luminous bodies be made luminous?

Description : How can non luminous bodies be made luminous?

Last Answer : by reflecting the light energy

Planets are (a) luminous bodies that twinkle (b) non-luminous bodies that twinkle (c) luminous bodies that do not twinkle (d) non-luminous bodies that do not twinkle

Description : Planets are (a) luminous bodies that twinkle (b) non-luminous bodies that twinkle (c) luminous bodies that do not twinkle (d) non-luminous bodies that do not twinkle

Last Answer : Ans:(d)

Planets 1. are luminous bodies 2. twinkle 3. are non-luminous bodies 4. do not twinkle Which of the above statements is/are correct? (a) 1 and 2 (b) 1 and 4 (c) 2 and 3 (d) 3 and 4

Description : Planets 1. are luminous bodies 2. twinkle 3. are non-luminous bodies 4. do not twinkle Which of the above statements is/are correct? (a) 1 and 2 (b) 1 and 4 (c) 2 and 3 (d) 3 and 4

Last Answer : Ans:(d)

We can see non luminous object ,when the light a) emitted by the object falls on the eye . b) is reflected from the object towards eye . c) completely passes through the object . d) gets completely absorbed by object .

Description : We can see non luminous object ,when the light a) emitted by the object falls on the eye . b) is reflected from the object towards eye . c) completely passes through the object . d) gets completely absorbed by object .

Last Answer : b) is reflected from the object towards eye .

What happens when a piece of bangle is heated in a candle flame?

Description : What happens when a piece of bangle is heated in a candle flame?

Last Answer : When a piece of bangle is heated in a candle flame, it first becomes soft and then melts as glass does not have a definite melting point.

A student focuses the image of a candle flame, placed at about 2 m from a convex lens of focal length 10 cm, on a screen. After that he moves gradually the flame towards the lens and each time focuses its image on the screen. (a) In which direction does he move the lens to focus the flame on the screen? (b) What happens to the size of the image of the flame formed on the screen? (c) What difference is seen in the intensity (brightness) of the image of the flame on the screen? (d) What is seen on the screen when the flame is very close (at about 5 cm) to the lens?

Description : A student focuses the image of a candle flame, placed at about 2 m from a convex lens of focal length 10 cm, on a screen. After that he moves gradually the flame towards the lens and each time focuses its ... d) What is seen on the screen when the flame is very close (at about 5 cm) to the lens?

Last Answer : (a) The student moves the lens away from the screen to focus the image because on moving the candle towards the lens, the image distance increases. (b)The size of the image increases when the object ... on the screen. A virtual image is formed behind the candle on the same side of the screen.

What are the metals made of nichrome ?

Description : What are the metals made of nichrome ?

Last Answer : : Nichrome is an alloy of nickel , chromium and iron.

What is Nichrome used for ?

Description : What is Nichrome used for ?

Last Answer : Nichrome is used in electric heaters

A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Description : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Last Answer : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a ... is `1.7xx10^(-4) "per"^(@)C`.

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Description : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Last Answer : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`

Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Description : Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Last Answer : ANSWER: D

The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Description : The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Last Answer : Ans:(a)

An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : (3) Nichrome Explanation: Nichrome is used in electric iron because it has high resistance and it is stable in air when hot. Nichrome wire forms a protective layer of chromium oxide. Chemically it is quite stable and does not combine with other atmospheric gases even in high temperature.

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Description : For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Last Answer : (3) Nichrome Explanation: Nichrome has high resistance and it is called a resistor.

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : (2) Nichrome Explanation: Due to its resistance to oxidation and stability at high temperatures, Nichrome is widely used in electic heating elements, such as in appliances and tools. Typically, ... in coils to a certain electrical resistance, and current is passed through it to produce heat.

Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : (3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to ... percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.

The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Description : Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Last Answer : (B) Nickel and chromium

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

__________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Description : __________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Last Answer : (A) Nichrome

Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Description : Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Last Answer : D. Nichrome (Answer)

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Description : The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Last Answer : (B) silver.

An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : Nichrome

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : Nichrome