Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium  26 D. Nichrome
by

1 Answer

Answer :

ANSWER: D
by
selected

Related questions

Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Description : Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Last Answer : D. Nichrome (Answer)

Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : (3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to ... percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.

Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : Nichrome

The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Description : The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Last Answer : Ans:(a)

An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : (3) Nichrome Explanation: Nichrome is used in electric iron because it has high resistance and it is stable in air when hot. Nichrome wire forms a protective layer of chromium oxide. Chemically it is quite stable and does not combine with other atmospheric gases even in high temperature.

An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : Nichrome

The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : (2) Nichrome Explanation: Due to its resistance to oxidation and stability at high temperatures, Nichrome is widely used in electic heating elements, such as in appliances and tools. Typically, ... in coils to a certain electrical resistance, and current is passed through it to produce heat.

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : Nichrome

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : Tungsten

Electric ovens using heating elements of _______________ can produce temperature upto 3000°C. (A) Nickel (B) Graphite (C) Chromium (D) Iron

Description : Electric ovens using heating elements of _______________ can produce temperature upto 3000°C. (A) Nickel (B) Graphite (C) Chromium (D) Iron

Last Answer : Ans: C Chromium has high melting point.

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Description : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Last Answer : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Description : Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Last Answer : (4) For all of the above reasons

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

The heating element of an electric heater is made of?

Description : The heating element of an electric heater is made of?

Last Answer : Nichrome

A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Description : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Last Answer : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a ... is `1.7xx10^(-4) "per"^(@)C`.

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

__________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Description : __________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Last Answer : (C) Invar

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately? A.385 ohms B.38.5ohms C.3.1 ohms D.31 ohms

Last Answer : 31ohns

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately...

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: A. 385Ω B. 38.5Ω C. 3.1Ω D. 31Ω

Last Answer : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: 31Ω

Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Description : Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Last Answer : (B) Nickel and chromium

The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Description : The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Last Answer : (B) Tungsten

A nichrome wire used as heater coil has the resistance of 1 ohm/m. For ...

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.

High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Description : High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Last Answer : (A) Maraging steel

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

Hardest material is - (1) Tungsten (2) Diamond (3) Steel (4) Graphite

Description : Hardest material is - (1) Tungsten (2) Diamond (3) Steel (4) Graphite

Last Answer : (2) Diamond Explanation: Diamondsare commonly known as the hardest substance on earth, used in drill bits for cutting applications.

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.

Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Last Answer : (B) Cobalt

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

__________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (D) Molybdenum

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (C) Tungsten

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Description : 18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium

Last Answer : (B) Tungsten, chromium and vanadium

Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Last Answer : (B) Cobalt, chromium and tungsten

Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten

Last Answer : (A) Chromium

Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Last Answer : (B) Cobalt, chromium & tungsten

__________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum

Last Answer : (C) Cobalt

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (A) Molybdenum

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

__________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico

Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico

Last Answer : Option A

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B