An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0
by

1 Answer

Answer :

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`
by
selected by

Related questions

Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Description : Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Last Answer : ANSWER: D

The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Description : The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Last Answer : Ans:(a)

An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : (3) Nichrome Explanation: Nichrome is used in electric iron because it has high resistance and it is stable in air when hot. Nichrome wire forms a protective layer of chromium oxide. Chemically it is quite stable and does not combine with other atmospheric gases even in high temperature.

Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Description : Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Last Answer : D. Nichrome (Answer)

An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : Nichrome

A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Description : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a few seconds to a steady value of 2.

Last Answer : A nichrome heating element connected to a 200 V supply draws an intial current of 2.2 A which settles down after a ... is `1.7xx10^(-4) "per"^(@)C`.

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

__________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Description : __________ wire is never used for making the heating element. (A) Nichrome (B) Kanthal (C) Invar (D) None of these

Last Answer : (C) Invar

Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Description : Nichrome wire is used in an electric heater because _______. (1) It has high resistance (2) It has high melting point (3) It can resist a current upto approx 5 amperes (4) For all of the above reasons

Last Answer : (4) For all of the above reasons

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : (3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to ... percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.

The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : Nichrome

High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Description : High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Last Answer : (A) Maraging steel

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

What is the maximum heating temperature of the toaster?

Description : What is the maximum heating temperature of the toaster?

Last Answer : It's temperature is 180 degrees.

By-products are __________ recovered in 'Beehive ovens'. (A) Fully (B) Partially (C) Not at all (D) Negligibly

Description : By-products are __________ recovered in 'Beehive ovens'. (A) Fully (B) Partially (C) Not at all (D) Negligibly

Last Answer : (C) Not at all

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Description : In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Last Answer : (B) Induction and resistance

When electric current passes through a metallic conductor, its temperature rises. This is due to?

Description : When electric current passes through a metallic conductor, its temperature rises. This is due to?

Last Answer : When electric current passes through a metallic conductor, its temperature rises. This is due to collisions between conduction electrons and atoms.

For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Description : For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Last Answer : (3) Nichrome Explanation: Nichrome has high resistance and it is called a resistor.

For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Description : For which of the following substances, the resistance decreases with increase in temperature? (1) Pure silicon (2) Copper (3) Nichrome (4) Platinum

Last Answer : Nichrome

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately? A.385 ohms B.38.5ohms C.3.1 ohms D.31 ohms

Last Answer : 31ohns

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately...

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: A. 385Ω B. 38.5Ω C. 3.1Ω D. 31Ω

Last Answer : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: 31Ω

Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Description : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Last Answer : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is ` ... wire, what will be the current in the wire ?

What's the best type of toaster oven for a dorm room?

Description : What's the best type of toaster oven for a dorm room?

Last Answer : The best type of toaster for a dorm room is a two slice typical toaster. You can buy a Hamilton Beach toaster for 24.00.

Can you broil meat in a toaster oven I'm moving out of the dorms and into my own place. I don't have much room, but I need something to cook on.?

Description : Can you broil meat in a toaster oven I'm moving out of the dorms and into my own place. I don't have much room, but I need something to cook on.?

Last Answer : As long as you choose a toaster oven model that has a broiler function, you can definitely broil a breast of chicken or pan of bacon, for instance, with a toaster oven.

In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the resistance of ammeter will be

Description : In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the resistance of ammeter will be

Last Answer : In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the ... 1)/(500)G` D. `(500)/(499)G`

A beam of ultraviolet light of all wavelengths passes through hydrogen gas at room temperature, in the x. dimction. Assume thatall photons emitted due

Description : A beam of ultraviolet light of all wavelengths passes through hydrogen gas at room temperature, in the x. dimction. Assume thatall photons emitted due

Last Answer : A beam of ultraviolet light of all wavelengths passes through hydrogen gas at room temperature, in the ... light D. B will contain some visible light

__________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Description : __________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Last Answer : (A) Nichrome

What happened to the man who plugged his electric blanket into a toaster? -Riddles

Description : What happened to the man who plugged his electric blanket into a toaster? -Riddles

Last Answer : He kept popping out of bed.

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : (2) Nichrome Explanation: Due to its resistance to oxidation and stability at high temperatures, Nichrome is widely used in electic heating elements, such as in appliances and tools. Typically, ... in coils to a certain electrical resistance, and current is passed through it to produce heat.

The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : Nichrome

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : Tungsten

A nichrome wire used as heater coil has the resistance of 1 ohm/m. For ...

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.

When electric current passes through a bucket full of water, lot of bubbling is observed...

Description : When electric current passes through a bucket full of water, lot of bubbling is observed. This suggests that the type of supply is?

Last Answer : When electric current passes through a bucket full of water, lot of bubbling is observed. This suggests that the type of supply is D.C.

Heat produced when a steady state current, I passes through an electrical conductor having resistance, 'R' is (A) IR (B) I 2R (C) IR 2 (D) I 2R

Description : Heat produced when a steady state current, I passes through an electrical conductor having resistance, 'R' is (A) IR (B) I 2R (C) IR 2 (D) I 2R

Last Answer : (B) I 2R

When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Last Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

The characteristic invalid for heat radiation is that it travels – (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Description : The characteristic invalid for heat radiation is that it travels – (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Last Answer : (3) with the speed of light Explanation: Heat is a form of energy. An important property of heat is that it flows from a body at higher temperature to another body at lower temperature.

The characteristic invalid for heat radiation is that it travels : (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Description : The characteristic invalid for heat radiation is that it travels : (1) in a straight line (2) in all directions (3) with the speed of light (4) heating the medium through which it passes

Last Answer : with the speed of light

Why do small toaster ovens sell so good on ebay?

Description : Why do small toaster ovens sell so good on ebay?

Last Answer : Toaster ovens are sent straight from heaven. You can make almost anything in them and they don’t take a tenth of the power an oven requires. We use ours all the time. Plus, one never knows when a mini-pizza will be required STAT.

My current microwave oven causes my circuit breaker to trip if I use it at the same time as my toaster oven. Will this microwave solve that problem?

Description : My current microwave oven causes my circuit breaker to trip if I use it at the same time as my toaster oven. Will this microwave solve that problem?

Last Answer : It's doubtful; I wouldn't be able to answer that for sure unless I knew the particulars of your set-up (what is your microwave/toaster's draw? what kind of breaker do you have? etc.), but I don't see any reason why this microwave would help that situation.

The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at `27^(@)C` is `1 Omega`. At what temperat

Description : The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at `27^(@)C` is `1 Omega`. At what temperat

Last Answer : The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at ... K B. 1100 K C. 1400 K D. 1127 K