Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten
by

1 Answer

Answer :

(3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to pass electricity and give off heat. Nichrome is made of 80 percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.
by
selected

Related questions

Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : Nichrome

Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Description : Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome

Last Answer : ANSWER: D

Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Description : Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)

Last Answer : D. Nichrome (Answer)

The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Description : The heating element in an electric iron is made of (a) Nichrome (b) Tungsten (c) Copper (d) Iron

Last Answer : Ans:(a)

An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of – (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : (3) Nichrome Explanation: Nichrome is used in electric iron because it has high resistance and it is stable in air when hot. Nichrome wire forms a protective layer of chromium oxide. Chemically it is quite stable and does not combine with other atmospheric gases even in high temperature.

An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Description : An electric iron has a heating element made of : (1) Copper (2) Tungsten (3) Nichrome (4) Zinc

Last Answer : Nichrome

Electric ovens using heating elements of _______________ can produce temperature upto 3000°C. (A) Nickel (B) Graphite (C) Chromium (D) Iron

Description : Electric ovens using heating elements of _______________ can produce temperature upto 3000°C. (A) Nickel (B) Graphite (C) Chromium (D) Iron

Last Answer : Ans: C Chromium has high melting point.

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Last Answer : Tungsten

For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these

Description : For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these

Last Answer : Answer: Option A

The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : (2) Nichrome Explanation: Due to its resistance to oxidation and stability at high temperatures, Nichrome is widely used in electic heating elements, such as in appliances and tools. Typically, ... in coils to a certain electrical resistance, and current is passed through it to produce heat.

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Description : The material used in electric heater is (1) Tungsten (2) Nichrome (3) Brass (4) Steel

Last Answer : Nichrome

The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : Tungsten

Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Description : Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Last Answer : (B) Nickel and chromium

Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Description : Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Last Answer : ANSWER: W -- LIMESTONE AND CARBON

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Last Answer : (B) Cobalt

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Last Answer : (B) Cobalt, chromium and tungsten

Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Last Answer : (B) Cobalt, chromium & tungsten

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

The main constituent of permalloy is (a) cobalt (b) chromium (c) nickel (d) tungsten

Description : The main constituent of permalloy is (a) cobalt (b) chromium (c) nickel (d) tungsten

Last Answer : (c) nickel

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

Explain the effects of following chemical elements on iron. 1) Chromium 2) Nickel 3) Silicon.

Description : Explain the effects of following chemical elements on iron. 1) Chromium 2) Nickel 3) Silicon.

Last Answer : Effect on Iron:  1) chromium: Cr increases the hardenability of steel while there is a minimal effect on the ductility. Cr is normally added to steel for increasing oxidation resistance, and ... form of graphite results in a softer iron, reduces shrinkage, lowers strength, and decreases density.

Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : (4) It has a very high melting point Explanation: Tungsten is used because it has the highest melting point of all the metallic elements. It melts at 3410 degrees Celsius. When current passes ... bulb. The first successful light bulb filaments were made of carbon (from carbonized paper or bamboo).

Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : It has a very high melting point

Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Description : Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Last Answer : ANSWER: Z -- CHROMIUM AND NICKEL

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (C) Tungsten

Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium

Last Answer : (A) Molybdenum

High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Description : High resistance electrical heating elements/wire are not made of (A) Maraging steel (B) Nimonic alloys (C) Kanthal wire (D) Nichrome

Last Answer : (A) Maraging steel

The metals commonly used for electroplating are – (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Description : The metals commonly used for electroplating are – (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Last Answer : (2) Chromium, Copper and Nickel Explanation: The process of electroplating takes place as metals in ionic form move from a positive to negative electrode. An electric current passing through the ... ability of metal objects. Plating protects by one of two ways, either sacrificially or mechanically.

The metals commonly used for electroplating are (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Description : The metals commonly used for electroplating are (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Last Answer : Chromium, Copper and Nickel

Which of the toxic heavy metals is found in modern tannery industries ? (1) Nickel (2) Zinc (3) Chromium(4) Lead

Description : Which of the toxic heavy metals is found in modern tannery industries ? (1) Nickel (2) Zinc (3) Chromium(4) Lead

Last Answer : Chromium

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Description : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Last Answer : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`

Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased temperature C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Last Answer : Answer: A

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Last Answer : Option B

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Last Answer : Option B

All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Last Answer : (A) Nickel

Galvanised iron is made by coating iron with – (1) Zinc (2) Nickel (3) Chromium (4) Sulphur

Description : Galvanised iron is made by coating iron with – (1) Zinc (2) Nickel (3) Chromium (4) Sulphur

Last Answer : (1) Zinc Explanation: Galvanization) is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting, Although galvanization can be done with electrochemical and electro- ... is hot-dip galvanization, in which steel parts are submerged in a bath of molten zinc.

Invar used in thermocouples is an alloy of nickel and (A) Iron (B) Copper (C) Chromium (D) Lead

Description : Invar used in thermocouples is an alloy of nickel and (A) Iron (B) Copper (C) Chromium (D) Lead

Last Answer : (A) Iron