What is the Percent notation for 0.002?

Question

What is the Percent notation for 0.002?

asked Jan 18, 2022 by anonymous

1 Answer

Answer :

Multiply it by 100 to change it into a percentage and so it is0.2%

answered Jan 18, 2022 by anonymous
selected Jan 18, 2022 by anonymous

Related questions

What is 0.002 in fraction and percent?

Description : What is 0.002 in fraction and percent?

Last Answer : 0.002 is a fraction. It is a fraction in decimal form rather than in the form of a ratio. However, that does not stop it being a fraction. Its rational equivalent is 2/1000 which can be simplified, if required. It is 0.2%.

A 100 mL sample of water was treated to convert any iron present to `Fe^(2+)`. Addition of 25 mL of 0.002 M `K_(2)Cr_(2)O_(7)` resulted in the reactio

Description : A 100 mL sample of water was treated to convert any iron present to `Fe^(2+)`. Addition of 25 mL of 0.002 M `K_(2)Cr_(2)O_(7)` resulted in the reactio

Last Answer : A 100 mL sample of water was treated to convert any iron present to `Fe^(2+)`. Addition of 25 ... parts per million (ppm) of iron in the water sample.

0.002 is 1/10 of?

Description : 0.002 is 1/10 of?

Last Answer : 0.02

0.002?

Description : 0.002?

Last Answer : Suckkkkkk myyyy headddd

Which is greater 0.02 or 0.002?

Description : Which is greater 0.02 or 0.002?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

What is the word form of 0.002?

Description : What is the word form of 0.002?

Last Answer : it is two thousandths

If 20 J of energy is trapped at producer level, then how much energy will be available to peacock as food in the following chain? Plant → Mice → Snake → Peacock (a) 0.02 J (b) 0.002 J (c) 0.2 J (d) 0.0002 J

Description : If 20 J of energy is trapped at producer level, then how much energy will be available to peacock as food in the following chain? Plant → Mice → Snake → Peacock (a) 0.02 J (b) 0.002 J (c) 0.2 J (d) 0.0002 J

Last Answer : (a) 0.02 J

The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Description : The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Last Answer : (c) 0.01-0.05 mm

The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Description : The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Last Answer : (D) < 0•002 mm

Calculate the phase constant of a dielectric with frequency 6 x 10 6 in air. a) 2 b) 0.2 c) 0.02 d) 0.002

Description : Calculate the phase constant of a dielectric with frequency 6 x 10 6 in air. a) 2 b) 0.2 c) 0.02 d) 0.002

Last Answer : c) 0.02

Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Description : Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Last Answer : (B) 0.2

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Last Answer : (D) 16 m

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Last Answer : (C) 0.0025

Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Description : According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Last Answer : (D) 0.075 mm to 0.002 mm

Stoke's law does not hold good if the size of particle is smaller than (A) 0.0002 mm (B) 0.002 mm (C) 0.02 mm (D) 0.2 mm

Description : Stoke's law does not hold good if the size of particle is smaller than (A) 0.0002 mm (B) 0.002 mm (C) 0.02 mm (D) 0.2 mm

Last Answer : (A) 0.0002 mm

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Description : Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm (C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Description : Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm ( ... having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Last Answer : Answer: Option D

The ultimate failure is assumed to be reached when the section reaches a uniform compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.005

Description : The ultimate failure is assumed to be reached when the section reaches a uniform compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.005

Last Answer : [ A ] 0.002

The concrete is assumed to reach failure with a compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Description : The concrete is assumed to reach failure with a compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Last Answer : [ B ] 0.0035

The ultimate strain of concrete at failure is [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Description : The ultimate strain of concrete at failure is [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Last Answer : [ B ] 0.0035

The concrete is assumed to reach failure with a compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Description : The concrete is assumed to reach failure with a compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Last Answer : [ B ] 0.0035

The ultimate strain of concrete at failure is [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Description : The ultimate strain of concrete at failure is [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.006

Last Answer : [ B ] 0.0035

The proof stress in steel is the stress corresponding to the strain of [ A ] 0.2 [ B ] 0.02 [ C ] 0.002 [ D ] 0.0002

Description : The proof stress in steel is the stress corresponding to the strain of [ A ] 0.2 [ B ] 0.02 [ C ] 0.002 [ D ] 0.0002

Last Answer : [ C ] 0.002

A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Description : A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Last Answer : b. 0.2

A cube of material of side 1 cm has a resistance of 0.002 ohm between...

Description : A cube of material of side 1 cm has a resistance of 0.002 ohm between its opposite faces. If the same volume of the material has a length of 8 cm and a uniform cross-section, the resistance of this length will be

Last Answer : A cube of material of side 1 cm has a resistance of 0.002 ohm between its opposite faces. If the same volume of the material has a length of 8 cm and a uniform cross-section, the resistance of this length will be 0.128 ohm.

How can i connect a digi 002 pro tools interface to a mixing board and external mic preamps?

Description : How can i connect a digi 002 pro tools interface to a mixing board and external mic preamps?

Last Answer : answer:I'm a bit confused; isn't the presonus an A/D converter in itself? How many simultaneous inputs are you trying to get here? How many mics are you trying to get going at the same ... Describe your setup and goals for tracking and we'll see what we can suggest for your signal chain solution.

Using differentials, find the approximate values of the following: `1/(2.002)^(2)`

Description : Using differentials, find the approximate values of the following: `1/(2.002)^(2)`

Last Answer : Using differentials, find the approximate values of the following: `1/(2.002)^(2)`

How thick is 002 inches?

Description : How thick is 002 inches?

Last Answer : 1 / 2 = 0.50.5 / 2 = 0.25 etc.1 = 10.5 = 1/20.25 = 1/40.125 = 1/80.0625 = 1/160.03125 = 1/320.0156 = 1/640.0078 = 1/1280.0039 = 1/2560.00195 = 1/5120.002 = 1/500

How many significant figures in 10.002?

Description : How many significant figures in 10.002?

Last Answer : All five of them

How many significant figures in 10.002?

Description : How many significant figures in 10.002?

Last Answer : All five of them

What does the notation "1:1 (0:0)" mean for soccer results?

Description : What does the notation "1:1 (0:0)" mean for soccer results?

Last Answer : 0–0 after the first half, 1–1 at the end of the game.

what is 0.0000307 in scientific notation?

Description : what is 0.0000307 in scientific notation?

Last Answer : 77