State the two uses of survey based on geodetic surveying

State the two uses of survey based on geodetic surveying
by

1 Answer

Answer :

Two uses of survey based on geodetic surveying:-

i) To determine the precise position s on the surface of the earth.

ii) Preparation of maps of large area like map of a country, state, etc.

iii) Establishment of GTS bench Marks across the country.

iv) Preparation of military maps for defense purposes.
by

Related questions

Differentiate between plane and geodetic survey on any four points.

Description : Differentiate between plane and geodetic survey on any four points. 

Last Answer : Difference between Plane Surveying and Geodetic Surveying Points Plane Surveying Geodetic Surveying Definition Plane surveying is that type of surveying in which mean surface of ... Traditional survey equipment is used Precise and modern survey equipment are required

State any two uses of Plane Surveying.

Description : State any two uses of Plane Surveying. 

Last Answer : 1) Plane surveying is used for measuring small distance. 2) When area is less than 260 km2, plane survey is normally done. 3) When desired accuracy is less, plane survey is done.

Write-four uses of surveying.

Description : Write-four uses of surveying.

Last Answer : Uses of surveying are: 1) Surveying is useful to plot ground details in various maps like topographic and cadastral maps. 2) It is useful in navigational movement planning through military survey. ... beneficial in collecting details of water bodies on earth like lake, pond, river, sea etc.

State any four classification of surveying based on instrument uesd.

Description : State any four classification of surveying based on instrument uesd. 

Last Answer : i) Chain survey ii) Plane table survey iii) Theodolite survey, iv) Tachometric survey v) compass survey vi) photographic survey, vii) Aerial survey 

State any two uses of survey.

Description : State any two uses of survey.

Last Answer : Survey is useful for following: 1. To prepare a map or plan of the surveyed area for attaching it to legal documents. 2. To plot control points of boundries of locality 3. To determine ... . 5. To decide suitable gradient and camber of road depending on equal volume of cutting and filling.

State the uses of following instruments in survey: i)Cross staff ii) Chain iii) Pegs iv) Arrows

Description : State the uses of following instruments in survey: i)Cross staff ii) Chain iii) Pegs iv) Arrows

Last Answer : i) Cross-Staff: To set up perpendicular or right angle to given chain line OR to find foot of perpendicular from given object to a chain line. ii) Chain: Chains are used for measuring distances. iii) ... on survey lines. iv) Arrows : They are used to mark the end of each chain during chaining. 

Define surveying & state its objectives

Description : Define surveying & state its objectives

Last Answer : Surveying- It is branch of civil engineering in which relative positions of ground points are determined by taking linear and angular measurement. Objectives: 1. To determine the relative positions of ... quantities 4. To prepare a topographical map showing details of hills, valleys and rivers.

State the use of alidade in plane table surveying

Description : State the use of alidade in plane table surveying

Last Answer : 1) It is used for sighting the objects to be located.  2) It is used for drawing the rays. 

State any four precautions to be taken while selecting stations for chain surveying.

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.

State the limitations of plane table surveying.

Description : State the limitations of plane table surveying.

Last Answer : 1) It is not suitable for work in wet climate 2) Several accessories are required to be carried hence possibility lost. 3) Replotting of survey work to different scale is difficult in absence of ... ) It is not intended for accurate work. 6) The plane table is essentially a tropical instrument.

State the principles of surveying.

Description : State the principles of surveying. 

Last Answer : Main principles of surveying are: 1) To work from whole to part. 2) To locate a point at least by two independent processes

Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Description : Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Last Answer : i) Ranging Rod : Ranging rod are used for ranging. ii) Pegs : Pegs are used for marking the positions of stations or terminals points of survey lines. iii) Cross-staff : It is used ... It is also used for accurate centering of the surveying instruments like theodolite, compass, plane table etc. 

Enlist uses of survey.

Description : Enlist uses of survey.

Last Answer : Uses of surveys. 1. To record relative positions of various points on the surface of earth. 2. Prepare plans and maps required for various works. 3. Layout of various engineering works. 4. Compute ... . 5. To prepare a topographic map 6. To prepare military map 7. To prepare archeological map

State the classification of surveys based on i) The nature of the field of survey. ii) The object of survey.

Description : State the classification of surveys based on i) The nature of the field of survey. ii) The object of survey. 

Last Answer : i)The nature of the field of survey.  1.Land surveying.  2.Marine surveying or Hydrographic surveying.  3.Astronomical surveying.  ii) The object of survey. 1.Geological surveying. 2.Mine surveying. 3.Archaeological surveying. 4. Military surveying. 5. Engineeringsurveying.

The process of surveying is therefore in three stages namely:

Description : The process of surveying is therefore in three stages namely:

Last Answer : (i) Taking a general view This part of the definition is important as it indicates the need to obtain an overall picture of what is required before any type of survey work is undertaken. In ... of quantities, datasheets, drawings and in land surveying maps and plan showing the features on the land.

Tacheometric Surveying

Description : Tacheometric Surveying

Last Answer : Tacheometric is a branch of surveying in which horizontal and vertical distances are determined by taking angular observation with an instrument known as a tachometer. Tacheometric surveying is adopted in rough ... be prepared for investigation works within a short time on the basis of such survey.

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Describe back sighting method of orientation of plane table surveying.

Description : Describe back sighting method of orientation of plane table surveying.

Last Answer : Backsight method of orientation 1. Assume we have to orient the table at next station B' represented on paper by point b'. 2.the line ba' is drawn on previous station A'. 3.the alidade is kept ... A'. 4. When the plotted line ab' coincides with line AB' and table will be oriented.

Define surveying.

Description : Define surveying.

Last Answer : Surveying- It is branch of civil engineering in which relative positions of ground points are determined by taking linear and angular measurement.

Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Description : Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Last Answer : 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by placing alidade ... the case of the survey of mountainous country. 5. The only linear measurement required is that of a base line.

Explain principle of chain surveying

Description : Explain principle of chain surveying 

Last Answer : 1) Principle of chain surveying is triangulation 2) Triangulation consists of frame work of triangles. The whole area is divided into network of triangles. 3) A triangle is the only simple plane ... to be adopted depends upon the shape & configuration of the ground & the natural obstacles. 

Enlist different errors in compass surveying.

Description : Enlist different errors in compass surveying.

Last Answer : Various errors in compass surveying are classified asi) Instrumental errors. ii) Personal errors or observational errors iii) Errors caused due to external errors (natural errors) i) ... magnetic declination. c) Local attraction due to proximity of magnetic substances or magnetic field.

Describe in brief resection method of plane table surveying.

Description : Describe in brief resection method of plane table surveying.

Last Answer : This method is used for establishing the instrument stations only. After fixing the stations, details are located either by radiation or intersection. The characteristic feature of resection is that the point ... of resection are (1)The Two Point Problem, and (2)Three Point Problem.

Describe in brief primary classification of surveying

Description : Describe in brief primary classification of surveying

Last Answer : Primary Classification Geodetic Survey The geodetic surveying is that type of surveying which takes into account the curvature of earth's surface. It is generally adopted for large area (more than ... large scale such as Bridges, Dams, Location and Construction of canals, highways, railways etc.

Geodetic surveying is undertaken (A) For production of accurate maps of wide areas (B) For developing the science of geodesy (C) Making use of most accurate instruments and methods of observation (D) All the above

Description : Geodetic surveying is undertaken  (A) For production of accurate maps of wide areas  (B) For developing the science of geodesy  (C) Making use of most accurate instruments and methods of observation  (D) All the above 

Last Answer : (D) All the above 

State two principles of survey.

Description : State two principles of survey.

Last Answer : Following are the two principles of survey. 1) To work from whole to part. 2) To locate a point at least by two independent processes.

State advantages of plane table survey one each with respect to booking and suitability

Description : State advantages of plane table survey one each with respect to booking and suitability

Last Answer : Booking of observations: i) Field work and plotting work done simultaneously ii) ) Notes of measurement are seldom required and possibility of mistakes in booking is eliminated. Suitability of PT ... and work where great accuracy is not required. ii) Mostly suitable for survey in plain terrain

State any four sources of errors in compass survey

Description : State any four sources of errors in compass survey 

Last Answer : Following are the sources of errors in compass survey1. Instrumental survey-  a. Needle may not be perfectly straight and might not be balanced properly over the station.  b. Graduations of the rings ... substances near the station.  b. Magnetic field may vary on account of some natural causes. 

State merits and demerits of plane table survey.

Description : State merits and demerits of plane table survey. 

Last Answer : Merits: 1) It is the most rapid method of surveying.  2)There is no need for field book as plotting is done along with the field work, so the problem of mistakes in booking field notes does not arise. ... to carry. 5) The map cannot be replotted to defferent scale as there is no field book. 

State the different point to be considered in selection of survey station for a closed traverse

Description : State the different point to be considered in selection of survey station for a closed traverse 

Last Answer : 1) Main survey stations should be inter visible. 2) The main survey lines should form well-conditioned triangles. 3) Each triangle or portion of skeleton must be provided with sufficient check lines. ... ) Survey line must be as few as possible so that the frame work can be plotted conveniently.

State the situations under which chain survey is most suitable

Description : State the situations under which chain survey is most suitable

Last Answer : Situations under which chain survey is most suitable 1) It is suitable for moderately small areas 2) When the ground is fairly level with simple details ( free from obstructions such as trees, building, poles etc ) 

State the principle of plane table survey.

Description : State the principle of plane table survey. 

Last Answer : Principle of plane table survey 1. The rays drawn from different points should pass through a single point i.e. position of station point.  2. The position of table should be same as that of previous station i.e. orientation should be done at each changed station.

State four advantages and four disadvantages of plane table survey

Description : State four advantages and four disadvantages of plane table survey

Last Answer : Advantages: 1. A field book is not required. 2. Errors of booking in field book avoided. 3. Errors of plotting can be readily checked. 4. Suitable in magnetic area. 5. Survey work with ... cannot be done in rainy season. 5. Difficult to re-plot as field notes are not available.

State the points to be considered while selecting survey stations.

Description : State the points to be considered while selecting survey stations.

Last Answer : Points to be considered while selecting survey stations. 1. Stations shall be inter visible. 2. Stations shall be so selected that well conditional triangles should be formed. 3. Stations shall be ... they run as close to details to be established as possible and only short offsets are needed.

State the primary classification of survey.

Description : State the primary classification of survey.

Last Answer : Primary classification of survey. 1. Geodetic survey: The survey in which curvature of earth is considered. 2. Plane survey: The survey in which earth surface is assumed as plane. 

State the suitability of plane table survey

Description : State the suitability of plane table survey

Last Answer : The plane tabling is generally suitable for surveys in which high precision is not required. It is mainly employed for small-scale or medium size mapping.

State the principle of compass survey.

Description : State the principle of compass survey. 

Last Answer : The principle of compass survey is traversing, which involves a series of connected survey lines (may be open or closed) whose lengths and bearing are measured by linear and angular measuring instruments.

What consideration would you have while selecting survey stations and survey lines in a chain survey?

Description : What consideration would you have while selecting survey stations and survey lines in a chain survey?

Last Answer : Following points to be considered while selecting survey stations and survey lines 1) Main survey station should be mutually visible. 2) All triangles should be well conditioned. 3) The survey line should lie ... of the area so as to form the frame work of triangles on it to cover maximum area. 

Defines the terms : i) Survey Station ii) Survey Line iii)Offset iv)Triangulation

Description : Defines the terms : i) Survey Station ii) Survey Line iii)Offset iv)Triangulation 

Last Answer : i) Survey Station : It is the point on ground from which various observations are taken around it. ii) Survey Line : It is the straight line joining two successive survey stations ... iv)Triangulation : The frame work consist of number of connected well conditional triangle is called Triangulation.

What are the objectives of following one each. i)Topographic Survey ii)Cadastral Survey iii)Engineering Survey iv)Mine Survey

Description : What are the objectives of following one each. i)Topographic Survey ii)Cadastral Survey iii)Engineering Survey iv)Mine Survey

Last Answer : i) Topographic Survey : To determine natural features like river, streams , lakes , hills etc and artificial features like roads , railways , canal , town and villages .  ii) Cadastral ... Mine Survey :To explore mineral deposits and to guide tunneling and other operations associated with mining. 

Explain in detail classification of survey.

Description : Explain in detail classification of survey. 

Last Answer : A. primary classification-  1. Plane surveying: In this survey curvature of the earth is not taken in to consideration.  2. Geodetic surveying: In this survey curvature of the earth is taken ... 3. Based on nature of field:  1.Land surveying  2.Marine surveying  3.Astronomical surveying

Explain the radiation method of plane table survey with neat sketch.

Description : Explain the radiation method of plane table survey with neat sketch. 

Last Answer : This method is used when all the points to be plotted are visible from single instrument station. Steps are: 1. Select a suitable point P on the ground such that all the details are visible from it. 2. Center and ... , pc, pd, pe respectively. Join a, b, c, d, and e to give the outline.

Classify survey as per instruments used.

Description : Classify survey as per instruments used.

Last Answer : Classification of Survey as per Instruments. 1) Chain Survey 2) Compass Survey 3) Plane Table Survey 4) Theodolite Survey 5) Tachometric Survey 6) Photogrammetric Survey

Explain intersection method of plane survey.

Description : Explain intersection method of plane survey.

Last Answer : Intersection method of plane tabling 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by ... sighted rays bd, bg, bf, bc are drawn to determine points intersection, d, g, f, c.

Explain temporary adjustment of plane table survey.

Description : Explain temporary adjustment of plane table survey.

Last Answer : 1. Setting over the station: The plane table is fixed on tripod and adjust the table in such a way that table is approximately level. 2. Leveling the table: The tubular or spirit level is placed in two ... . The table can be oriented in two ways. i. Using trough compass. ii. By back sighting.

List any four accessories required for plane table survey.

Description : List any four accessories required for plane table survey.

Last Answer : 1. Plane table. 2. Plumbing U-fork. 3. Alidade. 4. Spirit level. 5. Trough compass. 6. Plumb bob.

Describe in brief errors in plane table survey.

Description : Describe in brief errors in plane table survey.

Last Answer : 1) The board not being horizontal. 2) The table not being accurately centered. 3) The table not being Correctly oriented. 4) The objects not being sited accurately. 5) The alidade not being ... through the station point. 7) Inaccuracy in plotting. 8) The expansion and contraction of the paper.

Enlist different accessories of plane table survey with their use.

Description : Enlist different accessories of plane table survey with their use. 

Last Answer : i) The plane table: It is used for fixing a drawing sheet over it.  To locate the position of the objects on the sheet by drawing rays and plotting to suitable scale. ii) The Alidade (plain Alidade ... v) U-Fork or Plumbing fork with plumb bob: It is used for centering the table over the station. 

Describe in brief errors in compass survey.

Description : Describe in brief errors in compass survey.

Last Answer : Errors in Compass Surveying. The errors are classified as: 1. Instrumental errors. 2. Personal or Observational errors. 3. Errors due to External Influences (Natural errors etc.).  (1 ... in magnetic declination. (iii) Local attraction due to proximity of electric lines, steel structures etc.

Enlist the factors affecting on selection of survey station or survey line in chain survey.

Description : Enlist the factors affecting on selection of survey station or survey line in chain survey.

Last Answer : Following are the factors affecting on selection of survey station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole ... level ground. 9) The survey lines should run as far as possible nearer to object.