When was the first industrial arm robot introduced?

When was the first industrial arm robot introduced?
by

1 Answer

Answer :

Need answer
by
selected by

Related questions

Can Arduino be used for building a robot arm?

Description : Can Arduino be used for building a robot arm?

Last Answer : Yes, Arduino can be used for building a robot arm by using servo motors and sensors to control the movement and position of the arm, and by using communication modules to receive commands from a remote control or a programming interface.

From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Description : From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Last Answer : b.Cylindrical work envelope

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Last Answer : a) degrees of freedom

Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Description : Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Last Answer : d) roll

The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Description : The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Last Answer : d) Place block A on block B

Which of the following terms refers to the rotational motion of a robot arm A : Swivel B : Axle C : Retrograde D : Roll

Description : Which of the following terms refers to the rotational motion of a robot arm A : Swivel B : Axle C : Retrograde D : Roll

Last Answer : D : Roll

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Last Answer : B : Controller

The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Last Answer : A : degrees of freedom

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

From the following which type of work envelope is made in jointed arm robot. (A) Rectangular work envelope (B) Cylindrical work envelope (C) Spherical or hemispherical work envelope (D) None of the above

Description : From the following which type of work envelope is made in jointed arm robot. (A) Rectangular work envelope (B) Cylindrical work envelope (C) Spherical or hemispherical work envelope (D) None of the above

Last Answer : C

From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Description : From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Last Answer : D

Describe cylindrical body and arm assembly robot with neat sketch.

Description : Describe cylindrical body and arm assembly robot with neat sketch.

Last Answer : Cylindrical body robot: In the cylindrical configuration, robots have one rotatory (R) joint at the base and linear (L) joints succeed to connect the links. The space in which this robot ... in horizontal direction for vertical insertion tasks. It is basically used for the assembly purpose.

Which was the first industrial robot?

Description : Which was the first industrial robot?

Last Answer : Unimate was the first industrial robot, which worked on a General Motors assembly line at the Inland Fisher Guide Plant in Ewing Township, New Jersey, in 1961. It was invented by George Devol in the 1950s using his original patent filed in 1954 and granted in 1961 (U.S. Patent 2,988,237).

Which was the first industrial robot?

Description : Which was the first industrial robot?

Last Answer : Unimate was the first industrial robot, which worked on a General Motors assembly line at the Inland Fisher Guide Plant in Ewing Township, New Jersey, in 1961. It was invented by George Devol in the 1950s using his original patent filed in 1954 and granted in 1961 (U.S. Patent 2,988,237).

From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Last Answer : a.Industrial Robot

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Last Answer : c) six

Which of the following is the serial robot? A : Commercial robot B : Industrial robot C : In-house robot D : Mobile Robot

Description : Which of the following is the serial robot? A : Commercial robot B : Industrial robot C : In-house robot D : Mobile Robot

Last Answer : B : Industrial robot

The main objective (s) of Industrial robot is to A : To maximize the labor requirement B : To increase productivity C : To decrease the life of production machines D : To decrease productivity

Description : The main objective (s) of Industrial robot is to A : To maximize the labor requirement B : To increase productivity C : To decrease the life of production machines D : To decrease productivity

Last Answer : B : To increase productivity

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Last Answer : C : Six

Which of the following is the serial robot? A : Commercial robot B : Industrial robot C : In-house robot D : Mobile Robot

Description : Which of the following is the serial robot? A : Commercial robot B : Industrial robot C : In-house robot D : Mobile Robot

Last Answer : B : Industrial robot

Which of the following is the serial robot? A : Commercial robot B : Industrial robot C : In-house robot D : Mobile Robot

Description : Which of the following is the serial robot? A : Commercial robot B : Industrial robot C : In-house robot D : Mobile Robot

Last Answer : B : Industrial robot

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Last Answer : C : Six

3-The main objective(s) of Industrial robot is to (A) To minimise the labour requirement (B) To increase productivity (C) To enhance the life of production machines (D) All of the above

Description : 3-The main objective(s) of Industrial robot is to (A) To minimise the labour requirement (B) To increase productivity (C) To enhance the life of production machines (D) All of the above

Last Answer : 4

Which of the following is serial Robot? 1. Commercial Robot  2. Industrial Robot  3. In House Robot  4. None of the above

Description : Which of the following is serial Robot?  1. Commercial Robot  2. Industrial Robot  3. In House Robot  4. None of the above

Last Answer : 2

An industrial robot is not a general purpose programmable machine possessing certain human like characteristics. (A) True (B) Fals

Description : An industrial robot is not a general purpose programmable machine possessing certain human like characteristics. (A) True (B) Fals

Last Answer : B

List different components of Industrial Robot. State functions of any two.

Description : List different components of Industrial Robot. State functions of any two.

Last Answer : Components of Robots: A robot is a complex machine which may contain mechanical, electrical, pneumatic, hydraulic and microelectronic components. Essentially a robot consists of four elements ... of sensors are available nowadays including tactile proximity, ultrasonic ranging and vision sensors.