The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

The action ‘STACK(A, B)’ of a robot arm specify to _______________
a) Place block B on Block A
b) Place blocks A, B on the table in that order
c) Place blocks B, A on the table in that order
d) Place block A on block B
by

1 Answer

Answer :

d) Place block A on block B
by

Related questions

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Last Answer : a) degrees of freedom

Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Description : Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Last Answer : d) roll

Specify the agent architecture name that is used to capture all kinds of actions. a) Complex b) Relational c) Hybrid d) None of the mentioned

Description : Specify the agent architecture name that is used to capture all kinds of actions. a) Complex b) Relational c) Hybrid d) None of the mentioned

Last Answer : c) Hybrid

Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

In LISP, the addition 3 + 2 is entered as _______________ a) 3 + 2 b) 3 add 2

Description : In LISP, the addition 3 + 2 is entered as _______________ a) 3 + 2 b) 3 add 2

Last Answer : b) 3 add 2

_______________ are mathematical problems defined as a set of objects whose state must satisfy a number of constraints or limitations. a) Constraints Satisfaction Problems b) Uninformed Search Problems c) Local Search Problems d) All of the mentioned

Description : _______________ are mathematical problems defined as a set of objects whose state must satisfy a number of constraints or limitations. a) Constraints Satisfaction Problems b) Uninformed Search Problems c) Local Search Problems d) All of the mentioned

Last Answer : a) Constraints Satisfaction Problems

................. maintains the list of free disk blocks in the Unix file system. (A) I-node (B) Boot block (C) Super block (D) File allocation table

Description : ................. maintains the list of free disk blocks in the Unix file system. (A) I-node (B) Boot block (C) Super block (D) File allocation table

Last Answer : (C) Super block 

How the buckets are stored in predicate indexing? a) Lists b) Stack c) Hashes d) None of the mentioned

Description : How the buckets are stored in predicate indexing? a) Lists b) Stack c) Hashes d) None of the mentioned

Last Answer : c) Hashes

Best-First search can be implemented using the following data structure. a) Queue b) Stack c) Priority Queue d) Circular Queue

Description : Best-First search can be implemented using the following data structure. a) Queue b) Stack c) Priority Queue d) Circular Queue

Last Answer : c) Priority Queue

LIFO is ______ where as FIFO is ________ a) Stack, Queue b) Queue, Stack c) Priority Queue, Stack d) Stack. Priority Queue

Description : LIFO is ______ where as FIFO is ________ a) Stack, Queue b) Queue, Stack c) Priority Queue, Stack d) Stack. Priority Queue

Last Answer : a) Stack, Queue

Which search implements stack operation for searching the states? a) Depth-limited search b) Depth-first search c) Breadth-first search d) None of the mentioned

Description : Which search implements stack operation for searching the states? a) Depth-limited search b) Depth-first search c) Breadth-first search d) None of the mentioned

Last Answer : b) Depth-first search

An Artificial Intelligence system developed by Terry A. Winograd to permit an interactive dialogue about a domain he called blocks-world. a) SHRDLU b) SIMD c) BACON d) STUDENT

Description : An Artificial Intelligence system developed by Terry A. Winograd to permit an interactive dialogue about a domain he called blocks-world. a) SHRDLU b) SIMD c) BACON d) STUDENT

Last Answer : a) SHRDLU

If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Description : Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Last Answer : b) robots must never take actions harmful to humans

Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Description : Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Last Answer : a) pneumatic

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Last Answer : c) six

Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Description : Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Last Answer : a) peripheral tools

What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Description : What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Last Answer : c) work envelope

What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Description : What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Last Answer : c) feedback

A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Description : A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Last Answer : d) Mars Hover (Robot Navigation)

Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Description : Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Last Answer : c) Shakey

What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Description : What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Last Answer : d) All of the mentioned

A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Description : A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Last Answer : b) Weak Artificial Intelligence approach

A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Description : A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Last Answer : c) model-based vision

A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Description : A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Last Answer : c) manipulator

Stack Bracelets for Ultra Cute Arm Candy?

Description : Stack Bracelets for Ultra Cute Arm Candy?

Last Answer : Arm candy is ultra trendy this season. Stacking numerous bangles of multiple colors is cute and fun. The bracelets are fun to collect and exciting to mix and match. Look for all styles, including ... outfit -- the more creative the combination, the better! Fill up your entire forearm with bracelets!

Which of the following statements is not true about disk-arm scheduling algorithms ? (A) SSTF (shortest seek time first) algorithm increases performance of FCFS. (B) The number of requests for disk service are not influenced by file allocation method. (C) Caching the directories and index blocks in main memory can also help in reducing disk arm movements. (D) SCAN and C-SCAN algorithms are less likely to have a starvation problem.

Description : Which of the following statements is not true about disk-arm scheduling algorithms ? (A) SSTF (shortest seek time first) algorithm increases performance of FCFS. (B) The number of requests for disk ... arm movements. (D) SCAN and C-SCAN algorithms are less likely to have a starvation problem.

Last Answer : (B) The number of requests for disk service are not influenced by file allocation method.

Can Arduino be used for building a robot arm?

Description : Can Arduino be used for building a robot arm?

Last Answer : Yes, Arduino can be used for building a robot arm by using servo motors and sensors to control the movement and position of the arm, and by using communication modules to receive commands from a remote control or a programming interface.

From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Description : From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Last Answer : b.Cylindrical work envelope

When was the first industrial arm robot introduced?

Description : When was the first industrial arm robot introduced?

Last Answer : Need answer

Which of the following terms refers to the rotational motion of a robot arm A : Swivel B : Axle C : Retrograde D : Roll

Description : Which of the following terms refers to the rotational motion of a robot arm A : Swivel B : Axle C : Retrograde D : Roll

Last Answer : D : Roll

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Last Answer : B : Controller

The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Last Answer : A : degrees of freedom

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

From the following which type of work envelope is made in jointed arm robot. (A) Rectangular work envelope (B) Cylindrical work envelope (C) Spherical or hemispherical work envelope (D) None of the above

Description : From the following which type of work envelope is made in jointed arm robot. (A) Rectangular work envelope (B) Cylindrical work envelope (C) Spherical or hemispherical work envelope (D) None of the above

Last Answer : C

From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Description : From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Last Answer : D

Describe cylindrical body and arm assembly robot with neat sketch.

Description : Describe cylindrical body and arm assembly robot with neat sketch.

Last Answer : Cylindrical body robot: In the cylindrical configuration, robots have one rotatory (R) joint at the base and linear (L) joints succeed to connect the links. The space in which this robot ... in horizontal direction for vertical insertion tasks. It is basically used for the assembly purpose.

Draw block diagram of microcontroller based pick and place Robot. List the four movements required by this Robot.

Description : Draw block diagram of microcontroller based pick and place Robot. List the four movements required by this Robot.

Last Answer : Diagram : Explanation: The robot has three axes about which motion can occur. Rotation in a clockwise or anti-clock wise direction of the unit on its base Arm extension or ... . The gripper can be opened or closed by the piston in a linear cylinder extending or retracting as.

Which of the following is used to specify the beginning of a table’s row? (a) <table> -Technology

Description : Which of the following is used to specify the beginning of a table’s row? (a) -Technology

Last Answer : (b) tag indicates the beginning of a table’s row.

The tag is used to specify the individual table data in a table. (a) <tr> (b) <td> -Technology

Description : The tag is used to specify the individual table data in a table. (a) (b) -Technology

Last Answer : (b)The tag is used to specify the individual table data in a table.

The attribute used to specify the background color of a table is (a) color (b) bgtable -Technology

Description : The attribute used to specify the background color of a table is (a) color (b) bgtable -Technology

Last Answer : (d) bgcolor is used to specify the background color of a table.

The <thead> tag is used to specify the………..part of the table. -Technology

Description : The tag is used to specify the………..part of the table. -Technology

Last Answer : The tag is used to specify the headerpart of the table.

<th>‘tag is used to specify the column heading in a table. -Technology

Description : ‘tag is used to specify the column heading in a table. -Technology

Last Answer : True tag is used to specify the column heading in a table.

What makes a universal kinfe block different from other knife blocks?

Description : What makes a universal kinfe block different from other knife blocks?

Last Answer : Unlike normal knfe blocks, universal knife blocks have no slots to hold the knives. Since the block has no slots it can hold several knives of different sizes and shapes.

A block P released from the top of a smooth inclined plane slides down the plane. Another block Q is dropped from the same point and falls vertically downwards. Which one of the following statements will be true if the friction offered by air is negligible? (a) Both blocks will reach the ground at the same time (b) Block P will reach the ground earlier than block Q (c) Both blocks will reach the ground with the same speed (d) Block Q will reach the ground with a higher speed than block P

Description : A block P released from the top of a smooth inclined plane slides down the plane. Another block Q is dropped from the same point and falls vertically downwards. Which one of the following statements will be ... with the same speed (d) Block Q will reach the ground with a higher speed than block P

Last Answer : Ans:(c)

In _____coding, we divideour message into blocks, each of k bits, called ___. A) block; blockwords B) linear; datawords C) block; datawords D) none of the above

Description : In _____coding, we divideour message into blocks, each of k bits, called ___. A) block; blockwords B) linear; datawords C) block; datawords D) none of the above

Last Answer : block; datawords

We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above

Description : We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above

Last Answer : C. codewords