Description : A lamp is hanging along the axis of a circular table of radius r. at what height should the lamp be placed above the table so that the intensity of il
Last Answer : A lamp is hanging along the axis of a circular table of radius r. at what height should the lamp be placed ... is `(1)/(8)` of that at its centre ?
Description : A lamp is hanging at a height of `4 m` above a table. The lamp is lowered by `1 m` . The percentage increase in illuminace will be
Last Answer : A lamp is hanging at a height of `4 m` above a table. The lamp is lowered by `1 m` . The percentage increase in illuminace will be
Description : A plano-convex lens `(mu = 1.5)` has a curved surface of radiys 15 cm. what is its focal length ?
Last Answer : A plano-convex lens `(mu = 1.5)` has a curved surface of radiys 15 cm. what is its focal length ?
Description : A convex surface of radiys of curvature 20 cm separates air from glass of refractive index 1.5. Find the position and the nature of the image of a sma
Last Answer : A convex surface of radiys of curvature 20 cm separates air from glass of refractive index 1.5. Find ... at 50 cm in front of the convex surface.
Description : A beam 3m long simply supported at its ends ,is carrying a point load W at the centre.If the slope at the ends of the beam should not exceed 10,find the deflection at the centre of beam? a.18.41 mm b.13.45 mm c.17.45 mm d.21.67 mm.
Last Answer : c.17.45 mm
Description : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, assuming normal incidence. If the area of the s
Last Answer : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, ... , what is the luminous flux on this area ?
Description : A 60W lamp is rated at 0.8 watt/candela. Calculate (i) luminous intensity of the lamp, (ii) luminous flux of the lamp, and (iii) illuminance at a dist
Last Answer : A 60W lamp is rated at 0.8 watt/candela. Calculate (i) luminous intensity of the lamp, (ii) ... iii) illuminance at a distance of 2m from the lamp.
Description : In a TV studio the illuminance is about:
Last Answer : 1000 lux
Description : A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2 ... earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m
Last Answer : (D) 27,500 m3
Description : A tower of height 24m casts a shadow 50m and at the same time, a girl of height 1.8m casts a shadow. Find the length of the shadow of girl. (a) 3.7 5m (b)3 .5m (c) 3.25m (d) 3m
Last Answer : (a) 3.7 5m
Description : When a ball bounces, it rises to 2/3 of the height from which it fell. If the ball is dropped from a height of 36m, how high will it rise at the third bounce? a) 10 2/3 m b) 13 2/3 m c) 12 1/3 m d) 12 2/3m e) None of these
Last Answer : Height at third bounce =36 × (2/3)3 = 10 2/3 metre Answer: a)
Description : 1. Which is the gas usually filled in the electric bulb? 2. What is an intrusion of magma along a bedding plane is called? 3. Of which metal was the The famous figure of a dancing girl ... alloys is used for making magnets? 20. By which bank are the central banking functions in India performed?
Last Answer : Answer : 1. Nitrogen 2. Batholith 3. Bronze 4. Mahabalipuram 5. UTI-II 6. Xylem vessel system 7. China 8. Introduction of Dyarchy 9. Home Affairs 10. Charles H. Townes 11. Russia 12. Oxygen ... . Euclyptus 16. The Estimates Committee 17. Yangtze delta 18. Udayin 19. Alnico 20. Reserve Bank of India
Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows
Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5
Description : Which of the following can be calculated theoretically using steam table and Dalton's law of partial pressure; if the relative humidity and dry bulb temperature of moist air is known? (A) Dew point (B) Humidity ratio (C) Wet bulb temperature (D) None of these
Last Answer : (C) Wet bulb temperature
Description : Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high
Last Answer : (B) No
Description : The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4
Last Answer : b. 137.5 cm4
Description : A current `i` ampere flows in a circular arc of wire whose radius is `R`, which subtend an angle `3pi//2` radian at its centre. The magnetic induction
Last Answer : A current `i` ampere flows in a circular arc of wire whose radius is `R`, which subtend an angle `3pi//2` radian at ... 0)i)/(R )` D. `3mu_(0)i)/(8R)`
Description : If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16 (D) None of these
Last Answer : Answer: Option C
Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5
Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5
Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0
Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0
Description : A goat is tethered to one end of a rope of length 20m, while the other end is fixed at the centre of a large circular field. -Maths 9th
Last Answer : (b) 3.5 x 100πThe goat can graze the area CABEODC + quarter circle CDF + quarter circle FEB= \(rac{3}{4}\)x π x (20)2 + \(rac{1}{4}\) x π x (10)2 + \(rac{1}{4}\) x π x (10)2 = 300π + 25π + 25π= 3.5 x 100π.
Description : On meter length of wires carriers a constant current. The wire is bent to from a circular loop. The magnetic field at the centre of this loop is `B`.
Last Answer : On meter length of wires carriers a constant current. The wire is bent to from a circular loop. The magnetic field at ... B. `4B` C. `B/4` D. `16B`
Description : An electron moving in a circular orbit of radius `r` makes `n` rotation per secound. The magnetic field produced at the centre has magnitude
Last Answer : An electron moving in a circular orbit of radius `r` makes `n` rotation per secound. The magnetic field produced at ... (r)` D. `(mu_(0)"ne")/(2r)`
Description : Due to the flow of current in a circular loop of radius `R`, the magnetic induction produced at the centre of the loop is `B`. The magnetic moment of
Last Answer : Due to the flow of current in a circular loop of radius `R`, the magnetic induction produced at the centre of the ... )` D. `(2pi BR^(2))/(mu_(0))`
Description : The magnetic field due to a current carrying circular loop of radius 3 cm at a point on the axis at a distance of 4cm from the centre is `54muT`. What
Last Answer : The magnetic field due to a current carrying circular loop of radius 3 cm at a point on the axis at a distance of ... T` C. `125 mu T` D. `75 mu T`
Description : Assertion At the centre of a circular current carrying loop `(I_(1))`, there is an infinitely long straight of the circle. Then magnetic force of attr
Last Answer : Assertion At the centre of a circular current carrying loop `(I_(1))`, there is an infinitely long ... at centre is inwards, parallel to `I_(2)`.
Description : An electron moves in a circular orbit with a uniform speed `v`.It produces a magnetic field `B` at the centre of the circle. The radius of the circle
Last Answer : An electron moves in a circular orbit with a uniform speed `v`.It produces a magnetic field `B` at the centre of the ... (v)/(B))` D. `sqrt((B)/(v))`
Description : A current `-` carrying circular loop of radius `R` is placed in the `XY-` plane with centre at the origin. Half of the loop with `xgt0` is now bent so
Last Answer : A current `-` carrying circular loop of radius `R` is placed in the `XY-` plane with centre at the origin. ... B at (0,0,z), z gt gt R is unchanged
Description : When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to some current flowing is `B_(1)` If
Last Answer : When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to ... 1)` C. `3B_(1)` D. `27B_(1)`
Description : The magnetic field at the centre of a circular coil of radius `r` carrying current `l` is `B_(1)`. The field at the centre of another coil of radius `
Last Answer : The magnetic field at the centre of a circular coil of radius `r` carrying current `l` is `B_(1)`. The field at the ... `1//2` B. `1` C. `2` D. `4`
Description : A circular current carrying coil has a radius R. The distance from the centre of the coil on the axis where the magnetic induction will be `(1//8)^(th
Last Answer : A circular current carrying coil has a radius R. The distance from the centre of the coil on the axis where the ... 2//sqrt(3))R` D. `R//2sqrt(3)`
Description : On heating a circular metallic disc with a circular hole at the centre, the diameter of the hole will (a) decrease (b) remain the same (c) increase (d) first increase, then decrease
Last Answer : Ans:(c)
Description : A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole? (1) Increase (2) Decrease (3) Remain constant (4) Will increase first and then decrease
Last Answer : (1) Increase Explanation: Assuming the disc is uniform and isotropic (the same in different directions), the hole will expand in the same ratio as the metal. It is because the thermal expansion equation ... is made out of metal. And if the circumference of the hole expands, so does the diameter.
Description : Force which acts on a body moving in a circular path and it is directed towards centre is called?
Last Answer : Centripetal force
Description : A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole?
Last Answer : Decrease
Description : If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above
Last Answer : C) Torsional vibration
Description : Which formula is used to calculate mass moment of inertia (I G ) of a circular rim about the axis through centre of gravity? a. mr 2 /2b. mr 2 /12 c. mr 2 /4 d. mr 2
Last Answer : d. mr 2
Description : Find the magnetic field when a circular conductor of very high radius is subjected to a current of 12A and the point P is at the centre of the conductor. a) 1 b) ∞ c) 0 d) -∞
Last Answer : c) 0
Description : Calculate the magnetic field at a point on the centre of the circular conductor of radius 2m with current 8A. a) 1 b) 2 c) 3 d) 4
Last Answer : b) 2
Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)
Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder
Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear
Last Answer : (B) Parabolic
Description : If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero
Description : is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16
Description : Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve
Description : The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above
Last Answer : (D) All the above
Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only
Last Answer : (b) 1 & 3 only
Description : Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to ... A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point
Last Answer : C. A bright ring at the centre surrounded by alternate dark and bright rings
Description : A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole ? (1) Increase (2) Dacrease (3) Remain constant (4) Will increase first and then dcrease
Last Answer : Increase
Description : Find the cost of digging a cuboidal pit 8m long, 6m broad and 3m deep at the rate of Rs 30 per m3 -Maths 9th
Last Answer : The given pit has its length(l) as 8m, width (b)as 6m and depth (h)as 3 m. Volume of cuboidal pit = l×b×h = (8×6×3) = 144 (using formula) Required Volume is 144 m3 Now, Cost of digging per m3 volume = Rs 30 Cost of digging 144 m3 volume = Rs (144×30) = Rs 4320
Description : Which expression is equal to 6(-3m)^4?
Last Answer : -18m^4 = 104796