The 'centre line method' is specially adopted for estimating (A) Circular buildings (B) Hexagonal buildings (C) Octagonal buildings (D) All the above

The 'centre line method' is specially adopted for estimating
(A) Circular buildings
(B) Hexagonal buildings
(C) Octagonal buildings
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

The minimum number of main steel bars provided in R.C.C. (A) Rectangular columns is 4 (B) Circular columns is 6 (C) Octagonal columns is 8 (D) All the above

Description : The minimum number of main steel bars provided in R.C.C. (A) Rectangular columns is 4 (B) Circular columns is 6 (C) Octagonal columns is 8 (D) All the above

Last Answer : Answer: Option D

A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Description : A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Last Answer : Answer: Option D

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

Adopted planting system of orchard in Pakistan is: a. Square system b. Rectangular system c. Hexagonal system d. All of above

Description : Adopted planting system of orchard in Pakistan is: a. Square system b. Rectangular system c. Hexagonal system d. All of above

Last Answer : Square system

Pick up the correct characteristic of Pyroxene from the following: (A) It forms octagonal crystals (B) It converts to chlorine by hydration (C) Its density is 2.3 to 3.6 g/cm2 (D) All the above

Description : Pick up the correct characteristic of Pyroxene from the following: (A) It forms octagonal crystals (B) It converts to chlorine by hydration (C) Its density is 2.3 to 3.6 g/cm2 (D) All the above

Last Answer : Answer: Option D

The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of structure (c) The lower bound on the strength of structure (d) The upper bound on the strength of structure

Description : The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of ... The lower bound on the strength of structure (d) The upper bound on the strength of structure

Last Answer : (b) The upper and lower bounds respectively on the strength of structure

A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2:1, the earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Description : A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2 ... earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Last Answer : (D) 27,500 m3

Which one among the following is not an attribute of sustainability of Indian democratic model? (1) Unity in diversity in socio-cultural patterns (2) Sustained economic growth specially after the 1990s (3) Regular elections in the centre and states since 1950s (4) A strong industrial base with a vibrant federal structure

Description : Which one among the following is not an attribute of sustainability of Indian democratic model? (1) Unity in diversity in socio-cultural patterns (2) Sustained economic growth specially after the ... the centre and states since 1950s (4) A strong industrial base with a vibrant federal structure

Last Answer : (2) Sustained economic growth specially after the 1990s Explanation: Sustained economic growth specially after the 1990s, is not an attribute of sustainability of Indian democratic model.

Are there any qualities to be specially cultivated to succeed in this search of my centre?

Description : Are there any qualities to be specially cultivated to succeed in this search of my centre?

Last Answer : Specially the following three:- 1) Ahimsa (Harmlessness) 2) Ekagrata (One-pointedness) 3) Saralata (Simplicity)

Red octagonal berriers growing from what looks like a dogwood

Description : Red octagonal berriers growing from what looks like a dogwood

Last Answer : Need Answer

How can i use a graph to find the number of vertices in a octagonal pyramid?

Description : How can i use a graph to find the number of vertices in a octagonal pyramid?

Last Answer : The number of vertices in an octagonal pyramid is 9,irrespective of any graph.

Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The internal surface of the mould is kept clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Last Answer : Answer: Option D

7. Describe three important buildings in your city or village. Are they located in a special part of the settlement (e.g. the centre)? What are the activities that take place in these buildings? -Hindi

Description : 7. Describe three important buildings in your city or village. Are they located in a special part of the settlement (e.g. the centre)? What are the activities that take place in these buildings? -Hindi

Last Answer : The three important buildings in my city (Delhi) are : (i) Rashtrapati Bhavan: It is the official residence of the President India. (ii) Parliament House: in this house elected member of Parliament ... Supreme Court: It is the highest court of our country where all the major cases are decided.

If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero

Description : If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero

Last Answer : Answer: Option C

is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16

Description : is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16

Last Answer : Answer: Option C

If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16(D) None of these

Description : If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16 (D) None of these

Last Answer : Answer: Option C

Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve

Description : Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve

Last Answer : Answer: Option C

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

In the echo method of estimating distnces, a radar signa was sent towards the Mars. If the echo was received after 8 minute 20 second, how far wat the

Description : In the echo method of estimating distnces, a radar signa was sent towards the Mars. If the echo was received after 8 minute 20 second, how far wat the

Last Answer : In the echo method of estimating distnces, a radar signa was sent towards the Mars. If the echo was ... wat the Mars from the earth at that instant?

Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits

Description : Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits

Last Answer : (3) Pension Explanation: The income approach equates the total output of a nation to the total factor income received by residents or citizens of the nation. Transfer incomes are excluded from ... wages of labourers will be included, pensions of retired workers will be excluded from national income.

Which one of the following is not a method of estimating National Income? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Description : Which one of the following is not a method of estimating National Income? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Last Answer : (3) Matrix method Explanation: The matrix method is a structural analysis method used as a fundamental principle in many applications in civil engineering. The method is carried out, using ... of measuring national income. The methods are product method, income method and expenditure method.

Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for areas less than 50 hectares C. The period after which the entire area starts contributing to the runoff, is called the time of concentration D. All the above

Description : Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for ... entire area starts contributing to the runoff, is called the time of concentration D. All the above

Last Answer : ANS: D

Why is the MMF method of estimating the voltage regulation considered as the optimistic method?

Description : Why is the MMF method of estimating the voltage regulation considered as the optimistic method?

Last Answer : In this method the actual value is more than the result obtained.

Why is the synchronous impedance method of estimating voltage regulation considered as pessimistic method?

Description : Why is the synchronous impedance method of estimating voltage regulation considered as pessimistic method?

Last Answer : Compared to other methods, the value of voltage regulation obtained by the synchronous impedance method is always higher than the actual valuei.e actual value is lower than the results obtained and therefore this method is called the pessimistic method.

What are the advantages and disadvantages of estimating the voltage regulation of an Alternator by EMF method?

Description : What are the advantages and disadvantages of estimating the voltage regulation of an Alternator by EMF method?

Last Answer : Advantages: · Simple no load tests (for obtaining OCC and SCC) are to be conducted · Calculation procedure is much simpler Disadvantages: · The value of voltage regulation obtained by this method is always higher than the actual value

Kathryn has little experience estimating the time it will take to complete a systems project. She has just completed the planning phase of the project. What method should she use to estimate the time required to build the system? a. adjusted project complexity b. function points c. industry standards d. Microsoft Project e. more complex approach

Description : Kathryn has little experience estimating the time it will take to complete a systems  project. She has just completed the planning phase of the project. What method should she use to estimate the ... b. function points  c. industry standards  d. Microsoft Project  e. more complex approach

Last Answer : c. industry standards

Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) measuring the activity of Saccharomyces cerevisiae in producing curd on a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Description : Measuring Biochemical Oxygen Demand (BOD) is  a method used for  (a) estimating the amount of organic matter in  sewage water (b) working out the efficiency of oil driven  automobile engines ... commercial  scale (d) working out the efficiency of RBCs about their  capacity to carry oxygen.

Last Answer : (a) estimating the amount of organic matter in  sewage water

Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) measuring the activity of Saccharomyces cerevisiae in producing curd on a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Description : Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) ... a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Last Answer : (a) estimating the amount of organic matter in sewage water

How do you estimate in the three point estimating method?

Description : How do you estimate in the three point estimating method?

Last Answer : One optimistic estimate, a pessimistic estimate and one “most likey” estimate is considered for an activity. (Op estimate+6 X most likely+ pess. Estimate) is calculated and divided by 6. This result then may be further iterated. This is the estimate to be used.

The credit default spread method of valuation of a guarantee given by a parent company on behalf of its subsidiary involves estimating the value ____________. a) using credit default spread based on the credit rating of the subsidiary b) using credit default spread based on the credit rating of the guarantor c) based on probability of default d) of the guarantee using an option pricing model

Description : The credit default spread method of valuation of a guarantee given by a parent company on behalf of its subsidiary involves estimating the value ____________. a) using credit default spread based on ... guarantor c) based on probability of default d) of the guarantee using an option pricing model

Last Answer : a) using credit default spread based on the credit rating of the subsidiary

Method of managing promotion budget by defining objectives, determining tasks to achieve objectives and estimating costs for activities is called A. percentage of sales method B. affordable method C. competitive parity method D. objective and task method

Description : Method of managing promotion budget by defining objectives, determining tasks to achieve objectives and estimating costs for activities is called A. percentage of sales method B. affordable method C. competitive parity method D. objective and task method

Last Answer : D. objective and task method

72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of organic matter is sewage water (3) Working out the efficiency of oil driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Description : 72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of ... driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Last Answer : Estimating the amount of organic matter is sewage water

Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits

Description : Which one of the following is not included while estimating national income through income method? (1) Rent (2) Mixed incomes (3) Pension (4) Undistributed profits 

Last Answer : Pension

Which one of the following is not a method of estimating National Income ? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Description : Which one of the following is not a method of estimating National Income ? (1) Expenditure method (2) Product method (3) Matrix method (4) Income method

Last Answer : Matrix method 

For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line ofthe pipe, and it follows a __________ relationship.(A) Logarithmic(B) Parabolic(C) Hyperbolic(D) Linear

Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (B) Parabolic

Assertion A: Marine structures are made specially bulky and strong. Reason R: Sea insects result in undermining of the hardest and the soundest building material Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Marine structures are made specially bulky and strong. Reason R: Sea insects result in undermining of the hardest and the soundest building material Select your answer based on the coding system given below: (A) ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

What type of balun (balanced-to-unbalanced) is used in high frequency applications? A. Transformer type balun B. A specially configured coaxial transmission line C. A specially configured parallel-wire line D. A λ/2 transformer balun

Description : What type of balun (balanced-to-unbalanced) is used in high frequency applications? A. Transformer type balun B. A specially configured coaxial transmission line C. A specially configured parallel-wire line D. A λ/2 transformer balun

Last Answer : B. A specially configured coaxial transmission line

For estimating the run off of catchments, the mean value of the constant 'K' in the Khosla's formula Qy = Py - K (1.8 Ty + 32) is (A) 1.21 (B) 1.23 (C) 1.25 (D) 1.27

Description : For estimating the run off of catchments, the mean value of the constant 'K' in the Khosla's formula Qy = Py - K (1.8 Ty + 32) is (A) 1.21 (B) 1.23 (C) 1.25 (D) 1.27

Last Answer : (D) 1.27

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

Which Committee’s recommendations are being followed for estimating Poverty Line in India? -Do You Know?

Description : Which Committee’s recommendations are being followed for estimating Poverty Line in India? -Do You Know?

Last Answer : answer:

Which Committee’s recommendations are being followed for estimating Poverty Line in India?

Description : Which Committee’s recommendations are being followed for estimating Poverty Line in India?

Last Answer : Lakdawala Committee

Who conducts periodical sample survery for estimating poverty line in India? (a) National Survery Organisation (b) National Sample Survery Organisation (c) National Sample Survey Organisation (d) None of the above.

Description : Who conducts periodical sample survery for estimating poverty line in India? (a) National Survery Organisation (b) National Sample Survery Organisation (c) National Sample Survey Organisation (d) None of the above.

Last Answer : (b) National Sample Survery Organisation

In olden days the type of section adopted in trunk and out fall sewers was A. Parabolic shaped B. Horse shoe shaped C. Egg shaped D. Circular shaped

Description : In olden days the type of section adopted in trunk and out fall sewers was A. Parabolic shaped B. Horse shoe shaped C. Egg shaped D. Circular shaped

Last Answer : ANS: B

In incremental launching method of bridge construction, what are the measures adopted to enhance sufficient resistance of the superstructure during the launching process?

Description : In incremental launching method of bridge construction, what are the measures adopted to enhance sufficient resistance of the superstructure during the launching process?

Last Answer : i) During the launching process the leading edge of the superstructure is subject to a large hogging moment. In this connection, steel launching nose typically about 0.6­0.65 times span length is ... . iii)For very long span bridge, temporary piers are provided to limit the cantilever moment.

To remove very fine suspended particles from water, the method adopted is (A) Screening (B) Sedimentation (C) Boiling (D) Filtration

Description : To remove very fine suspended particles from water, the method adopted is  (A) Screening  (B) Sedimentation  (C) Boiling  (D) Filtration

Last Answer : To remove very fine suspended particles from water, the method adopted is  (A) Screening  (B) Sedimentation  (C) Boiling  (D) Filtration

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

Direct method of contouring is (A) A quick method (B) Adopted for large surveys only(C) Most accurate method (D) Suitable for hilly terrains

Description : Direct method of contouring is (A) A quick method (B) Adopted for large surveys only (C) Most accurate method (D) Suitable for hilly terrains

Last Answer : (C) Most accurate method

The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Description : The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Last Answer : Answer: Option C