Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.
Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
Description : How many of the given metals can be obtained by carbon reduction in their extractive metallurgy
Last Answer : How many of the given metals can be obtained by carbon reduction in their extractive metallurgy
Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as
Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition
Description : Which of the following process is used in the extractive metallurgy of magnesium ?
Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqqueos solution electrolysis D. Therminte reducation
Description : Which of the following statement is incorrect about the extractive metallurgy of coper?
Last Answer : Which of the following statement is incorrect about the extractive metallurgy of coper? A. Matte ... Bessomer converter is called as blister copper.
Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqueous solution electrolysis D. Thermite reduction
Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro
Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)
Description : Although thermodynamically feasible, in practice, Magnesium metal is not used for the reduction of Alumina in the metallurgy of aluminium.Why?
Last Answer : Ans. : Below the temperature(1623 K) correspoinding to the point of intersection of Al 2O3 and MgO curves in Ellingham diagram, Magnesium can reduce Alumina because the ΔfG o value of Al2O3 at ... to Al. But Magnesium is much costier metal than Aluminium and hence the process will be uneconomical.
Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore
Last Answer : (C) Manufacture of carbon electrode
Description : Maximum use of petroleum coke is in (A) Adsorption refining operation (B) Fuel gas manufacture (C) Carbon electrode manufacture (D) Iron ore reduction
Last Answer : (C) Carbon electrode manufacture
Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )
Last Answer : (B) Mercury
Description : Sulphur removal by heating of pyrite ore in presence of air is called its (A) Reduction (B) Roasting (C) Calcination (D) Smelting
Last Answer : (B) Roasting
Description : In the process of extraction of gold. Roasted gold ore `+CN^(-)+H_(2)O overset(O_(2))rarr [X]+OH^(-)` `[X]+Znrarr [Y]+Au` Identify the complexes `[X]
Last Answer : In the process of extraction of gold. Roasted gold ore `+CN^(-)+H_(2)O overset(O_(2))rarr [X]+OH^(-)` `[X]+ ... (4)]^(-),[Y] =[Zn (CN_(4))]^(-2)`
Description : Cost iron is prepared from haematite . In most of the Cases ore needs no concentration ,The ore is roasted to remove the volatile impurities ,During r
Last Answer : Cost iron is prepared from haematite . In most of the Cases ore needs no concentration ,The ore is roasted to ... molten slag `Fe_(2)(SiO_(3))_(3)`
Last Answer : Cost iron is prepared from haematite . In most of the Cases ore needs no concentration ,The ore is roasted to remove ... is A. 10 B. 20 C. 30 D. 40
Last Answer : Cost iron is prepared from haematite . In most of the Cases ore needs no concentration ,The ore is roasted to remove ... C` C. `FeC_(3)` D. `Fe_(2)C`
Description : In the process of extraction of gold, Roasted gold ore `+CN^(-)+H_2Ooverset(o_2)rarr[X]+OH^(-)` `[X]+Znrarr[Y]+Au` Identify the complexes [X] and [Y]
Last Answer : In the process of extraction of gold, Roasted gold ore `+CN^(-)+H_2Ooverset(o_2)rarr[X]+OH^(-)` `[X]+Znrarr[Y]+Au` ... _(4)]^(3-),Y=[Zn(CN)_(6)]^(2-)`
Description : Roasted tin-stone ore after washing with water is known as
Last Answer : Roasted tin-stone ore after washing with water is known as A. Moistuyre is removed B. As ... makes it sutiable for ready reduction to metallic iron.
Description : The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration
Last Answer : (C) Sintering
Description : Which one of the following reactions occur during smelting in the reduction zone at lower temperature(in iron metallurgy)?
Last Answer : Which one of the following reactions occur during smelting in the reduction zone at lower temperature(in iron ... CO` D. `CO_(2)+C rarr 2CO`
Description : If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile
Last Answer : (2) ductile Explanation: Ductility is a physical property of a material associated with the ability to be hammered thin or stretched into wire without breaking.
Description : If a metal can be drawn into wires relatively easily it is called: w) malleable x) ductile y) extractive z) tactile
Last Answer : ANSWER: X -- DUCTILE
Description : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with
Last Answer : In the extraction of Cu from its sulphide ore, the metal is formed by reduction of `Cu_(2)O` with A. FeS B. CO C. `Cu_(2)S` D. `SO_(2)`
Description : (A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts with its oxide to the give the metal
Last Answer : (A) Auto reduction of ore is used for the extraction of copper (R ) The sulphide ore of copper reacts ... . If (A) is incorrect but (R ) is correct
Description : Flux addition during smelting of ore is done to (A) Remove impurities/gangue (B) Enhance rate of reaction (C) Accelerate reduction of ore (D) Separate slag from metal
Last Answer : (A) Remove impurities/gangue
Description : The correct sequence of steps involved in extraction of metal from its ore is a) removal of impurities, purify metal, reduction of ore b) purify metal, removal of impurities, reduction of metal ore . c ... of metal , reduction d) removal of impurities from ore , reduction of ore , refining of metal
Last Answer : d) removal of impurities from ore , reduction of ore , refining of metal
Description : Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above
Last Answer : Answer: Option D
Description : Which of the following metals can be obtained from its ore only by electrolysis of a molten salt ? w) cobalt x) chromium y) copper z) sodium
Last Answer : ANSWER: Z -- SODIUM
Description : State general steps involved in metallurgy of a metal. -Science
Last Answer : The general steps of metallurgy are : Concentration of ore. Reduction of the metal compound. Refining of metal.
Description : Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition
Last Answer : Option C
Description : Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite
Last Answer : Ans:(d)
Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these
Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)
Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process
Last Answer : Answer: Option B
Description : Galena (PbS) on heating in limited supply of air gives lead metal. This is known as
Last Answer : Galena (PbS) on heating in limited supply of air gives lead metal. This is known as A. ... B. Calcination C. Self reduction D. Sulphatizing roasting
Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... CaSiO_(3)` D. `Cu_(2)O.SiO_(2)`
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... (3)` D. To check the reduction of FeO
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... O` D. `CuCO_(3).Cu(OH)_(2)`
Description : When the ore haematite is burnt in air with coke around `2000 K` along with lime, the process not only produces steel but also produces a silicate sla
Last Answer : When the ore haematite is burnt in air with coke around `2000 K` along with lime, the process not only produces ... 3)` C. `SiO_(2)` D. `CaCO_(3)`
Description : Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed
Last Answer : (B) Water from petro
Description : __________ is used as a flux in the smelting of copper ore like chalcopyrite. (A) Coke breeze (B) Lime powder (C) Silica/quartz (D) Dolomite
Last Answer : (C) Silica/quartz
Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore
Last Answer : Limestone, coke & iron ore
Description : Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone
Last Answer : Coke
Description : Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite
Last Answer : ANSWER: W -- COKE
Description : Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel
Last Answer : (A) Aluminium
Description : Which of the following liquid metals has the highest thermal conductivity? (A) Molten sodium (B) Molten lead (C) Mercury (D) Molten potassium
Last Answer : (A) Molten sodium
Description : 5. In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following: (A) Jet of water at high pressure (B) Blast of air (C) Mixture of water and air (D) Rain of molten lead
Last Answer : Option D
Description : Is the center of the Earth really molten metal?
Last Answer : answer:For the Skeptic this site is also for you and has some information. Thanks http://www.halfpasthuman.com/alsoaintwhatitusedtobe.html
Description : Is Steel rod Be heated into a molten metal is example of a phase change?
Last Answer : Feel Free to Answer