Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Powder metallurgy process does not make metal powder by
(A) Atomisation
(B) Grinding/milling
(C) Hammering
(D) Electrolytic deposition
by

1 Answer

Answer :

Option C
by

Related questions

Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Description : Alloy powder manufactured by the following process have spherical shapes. (A) Electrochemical deposition (B) Gaseous reduction (C) Atomisation (D) Mechanical attrition

Last Answer : (C) Atomisation

Tin coating on metals is not done by (A) Spraying (B) Powder metallurgy (C) Hot dipping (D) Electro-deposition

Description : Tin coating on metals is not done by (A) Spraying (B) Powder metallurgy (C) Hot dipping (D) Electro-deposition

Last Answer : (B) Powder metallurgy

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Description : The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Last Answer : (C) Sintering

W yellow powder, mostly made of uranium, that is produced in the uranium milling process is called what?

Description : W yellow powder, mostly made of uranium, that is produced in the uranium milling process is called what?

Last Answer : ANSWER: YELLOWCAKE or AMMONIUM DIURANATE

Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)

Which of the following can be manufactured using powder metallurgy techniques? (A) Brake linings (B) Bearings (C) Carbide tool tips (D) All 'a', 'b' and 'c'

Description : Which of the following can be manufactured using powder metallurgy techniques? (A) Brake linings (B) Bearings (C) Carbide tool tips (D) All 'a', 'b' and 'c'

Last Answer : (D) All 'a', 'b' and 'c'

Powder metallurgy is used to produce (A) High precision components with complex cavities and sharp features (B) Components of large size (C) Porosity free components (D) Components of such alloys whose constituents do not form alloys readily

Description : Powder metallurgy is used to produce (A) High precision components with complex cavities and sharp features (B) Components of large size (C) Porosity free components (D) Components of such alloys whose constituents do not form alloys readily

Last Answer : (C) Porosity free components

For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape

Description : For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape

Last Answer : (A) Spherical

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Last Answer : Option A

What are the properties of powder metallurgy ?

Description : What are the properties of powder metallurgy ?

Last Answer : The advantages of powder metallurgy are given below: All the products which cannot be made in any other way , can be made in this way. Products can also be made with a mixture of metallic ... case of mass production. Skilled workers are not needed. The product produced is very smooth and beautiful.

What is powder metallurgy ?

Description : What is powder metallurgy ?

Last Answer : The branch of metallurgy which deals with the preparation of metal powders and the use of specific heat and pressure from that powder to make human service utensils or desirable working materials and their properties is called powder metallurgy .

Explain the following , giving reason . (a) Transition metal and many of their compounds show paramagnetic behavior (b) The enthalpy of atomisation of the transition metal is high . (c) The Transition metal generally form coloured compounds .

Description : Explain the following , giving reason . (a) Transition metal and many of their compounds show paramagnetic behavior (b) The enthalpy of atomisation of the transition metal is high . (c) The Transition metal generally form coloured compounds . 

Last Answer : Ans(a) It is due to unpaired electrons . (b) It is due to strong metallic bond and additional Covalent bonds due to presence of unpaired electron in d- orbitals (c) It is due to presence of unpaired electrons ,they undergo d-d transition . 

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Description : When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Last Answer : Answer: B

State general steps involved in metallurgy of a metal. -Science

Description : State general steps involved in metallurgy of a metal. -Science

Last Answer : The general steps of metallurgy are : Concentration of ore. Reduction of the metal compound. Refining of metal.

In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with coke is called

Description : In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with coke is called

Last Answer : In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with ... B. roasting C. calcination D. None of these

Although thermodynamically feasible, in practice, Magnesium metal is not used for the reduction of Alumina in the metallurgy of aluminium.Why?

Description : Although thermodynamically feasible, in practice, Magnesium metal is not used for the reduction of Alumina in the metallurgy of aluminium.Why?

Last Answer : Ans. : Below the temperature(1623 K) correspoinding to the point of intersection of Al 2O3 and MgO curves in Ellingham diagram, Magnesium can reduce Alumina because the ΔfG o value of Al2O3 at ... to Al. But Magnesium is much costier metal than Aluminium and hence the process will be uneconomical.

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Description : Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Last Answer : (B) Hydrocarbon content type (aromatic or paraffinic)

Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds). (A) 5 (B) 25 (C) 50 (D) 100

Description : Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is __________ centistokes (or 100 Redwood I seconds). (A) 5 (B) 25 (C) 50 (D) 100

Last Answer : (B) 25

Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140

Description : Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140

Last Answer : (C) 90

Which of the following does not require preheating during storage in the storage tank as well as during atomisation through burners? (A) PCM (B) Tar (C) Light diesel oil (D) Low viscosity furnace oil

Description : Which of the following does not require preheating during storage in the storage tank as well as during atomisation through burners? (A) PCM (B) Tar (C) Light diesel oil (D) Low viscosity furnace oil

Last Answer : (C) Light diesel oil

Correct viscosity of furnace oil at the burner tip for proper atomisation is about 25 centistokes. To reduce the viscosity of high viscosity furnace oil (250 centistokes) to the correct atomisation viscosity (i.e. 25 cst), it should be preheated to about ___________°C. (A) 70 (B) 85 (C) 105 (D) 145

Description : Correct viscosity of furnace oil at the burner tip for proper atomisation is about 25 centistokes. To reduce the viscosity of high viscosity furnace oil (250 centistokes) to the correct atomisation viscosity (i.e. 25 cst), it should be preheated to about ___________°C. (A) 70 (B) 85 (C) 105 (D) 145

Last Answer : (C) 105

Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R

Description : Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R

Last Answer : (A) 200 °F

Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Description : Which of the following varies as the square root of oil pressure during atomisation of fuel oil through a pressure jet burner? (A) Output & fineness (B) Velocity (C) Both (A) & (B) (D) None of these

Last Answer : Option C

What nails do carpenters hate hammering?

Description : What nails do carpenters hate hammering?

Last Answer : Fingernails

The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Description : The method of magnetization is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Last Answer : (1) hammering a magnet Explanation: Hammering a rod will either allow it to become slightly magnetic inlaid along a magnetic field (i.e.North - South) or demagnetize it if laid across the field lines (i.e. East-West). A current passing through a coil will produce a magnetic field.

Hard peening is a) Hammering the weld across the length while the joint is hot b) Hammering the weld along the length while the joint is hot c) Hammering the weld along the length while the joint is cold d) Hammering the weld across the length while the joint is cold

Description : Hard peening is a) Hammering the weld across the length while the joint is hot b) Hammering the weld along the length while the joint is hot c) Hammering the weld along the length while the joint is cold d) Hammering the weld across the length while the joint is cold

Last Answer : b) Hammering the weld along the length while the joint is hot

The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Last Answer : a) Malleability

The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Description : The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Last Answer : sowing seeds

The method of magnetisation is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Description : The method of magnetisation is: (1) hammering a magnet (2) heating a magnet (3) passing direct current through it (4) passing alternating current through it

Last Answer :  hammering a magnet

State the effect of Water hammering effect in penstock of HPS and method to reduce it.

Description : State the effect of Water hammering effect in penstock of HPS and method to reduce it. 

Last Answer : Water hammering effect in penstock of HPS: When load on power plant or alternator decreases then Governor (valve) reduces discharge of water. Due to sudden reduction in water discharge causes ... helps by storing this rejected water immediately. In this way it avoids water hammer effect. 

Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Description : Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Last Answer : b.Stereo-lithography

Explain keyway milling process with standard milling cutters.

Description : Explain keyway milling process with standard milling cutters.

Last Answer : Keyway Milling Operation: This milling process produce keyway slot. The cutter use if thin size. This operation suited for long keyways. The position of the cutter is shown in figure. Standard ... and then the cut is taken. Woodruff key is produced by using a woodruff key slot cutter.

Explain Gang Milling Process.

Description : Explain Gang Milling Process.

Last Answer : Gang Milling Operation: It involves the use of a combination of more than two cutters, mounted on a common arbor, for milling a number of flat horizontal and vertical surfaces of a work piece ... . The cutting speed of a gang of cutters is calculated from the cutter of the largest diameter. 

Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining(C) Cutting(D) Polishing

Description : Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining (C) Cutting (D) Polishing

Last Answer : (D) Polishing

If `H_(2)(g)=2H(g),DeltaH=104cal` , then heat of atomisation of hydrogen is

Description : If `H_(2)(g)=2H(g),DeltaH=104cal` , then heat of atomisation of hydrogen is

Last Answer : If `H_(2)(g)=2H(g),DeltaH=104cal` , then heat of atomisation of hydrogen is A. 52 Kcal B. 104 Kcal C. 208 Kcal D. None of these

Which metal is extracted by electrolytic reaction method? -Do You Know?

Description : Which metal is extracted by electrolytic reaction method? -Do You Know?

Last Answer : answer:

Which metal is extracted by electrolytic reaction method?

Description : Which metal is extracted by electrolytic reaction method?

Last Answer : Al (Aluminium)

Which metal is extracted by electrolytic reaction method?

Description : Which metal is extracted by electrolytic reaction method?

Last Answer : Al (Aluminium)

Which of the following process is used in the extractive metallurgy of magnesium ?

Description : Which of the following process is used in the extractive metallurgy of magnesium ?

Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqqueos solution electrolysis D. Therminte reducation

Which of the following process is used in the extractive metallurgy of magnesium ?

Description : Which of the following process is used in the extractive metallurgy of magnesium ?

Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqueous solution electrolysis D. Thermite reduction